SVANLYN
SVANLYN Printer Cable 20 FT
Bottom line: The SVANLYN Printer Cable 20 FT: Extra-long 20 ft reach for placing printer far from your PC; main trade-off: USB 2.0 only, no faster USB 3.0 transfer speeds.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Extra-long 20 ft reach for placing printer far from your PC
- ✓ USB 2.0 speed to 480Mbps, backward-compatible with 1.1/1.0
- ✓ Nylon braided armor rated for 20,000+ bend cycles
- ✓ Reinforced SR strain-relief joints resist connector wear
- ✓ Broad USB-A to B fit: HP, Epson, Brother, Canon, Dell, Lexmark
Cons
- ✗ USB 2.0 only, no faster USB 3.0 transfer speeds
- ✗ 20 ft length is overkill for desk-side printer setups
- ✗ Type B plug won't fit newer USB-C printers
- ✗ Also doubles as MIDI cable, but no MIDI-specific shielding claims
SpecPicks Verdict
SpecPicks scored SVANLYN Printer Cable 20 FT using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. SVANLYN's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【UNIVERSAL PRINTER CABLE 20 Feet】: Printer cord to computer 20ft is used to connect thermal printer, desktop document scanner, MIDI controller, MIDI keyboard, development board, HD camera, server, hard drive, camera (such as HP, Canon , , Dell, Samsung and others with USB 2.0 B ports) can be connected to computers, laptops and other USB A-based devices.
- 【WIDE COMPATIBILITY】: This printer cable is compatible with Canon Pixma MG2520 / MG3550 / MG3650 / MG4250 / MG5220 / MG5550 / MG5750 etc; Canon i-SENSYS LBP6030w / LBP6200d / MF8280Cw etc; Epson XP-225 / XP-235 / XP-345 / XP-435 / XP-430 / XP-335 / XP-432 / XP-630 / XP-330 etc;Epson Stylus SX130 / SX235w / SX400 / SX515w etc; Epson WF-2540 / WF-2650 / WF-2660 / WF-2750 / WF-3520 / WF-3540 / WF-3620 / WF-2630 / WF-3640 etc;, HP Deskjet 3050/1112, HP Photosmart 5520/7520 / C4750, HP 8600 office pro / HP Laserjet Pro M118DW /, Brother MFC L-27000W, Brother HL-L2300D, MC8000 MIDI controller, Bluetooth MX492, Akai USB EWI, MIDI controller and MIDI keyboard with USB 2.0 B
- 【HIGH-SPEED PRINTING】: The Printer cable for canon pixma data transmission speed reaches 480Mbps, and the USB Type B cable is backward compatible with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps) standard devices. Plug and play, no need to install any plug-in, convenient and fast.
- 【HIGH-QULITY STRUCTURE】: In order to enhance the durability of the printer cord, realize stable and clear printing. We chose high-purity copper wire, and increased the number of core wires and shielding layers to make USB 2.0 printer cord have a long service life and more stable connection.
- 【REINFORCED SR JOINT DESIGN】:Printer usb cord with test of 20,000+ bend, the usb b cable special SR design makes the usb 2.0 printer cord joints more durable. The flexible and wear-resistant armor nylon braided material offers stronger protection.
Full Specifications
| Brand | SVANLYN |
|---|---|
| Color | Red |
| Model | DYJX-RB-20 |
| Cable Type | USB |
| Item Shape | Round |
| Model Name | SVANLYN |
| Unit Count | 1 Count |
| Item Length | 20 feet |
| Part Number | SUS-36A-PR-6.1BR |
| Connectivity | Bluetooth, USB |
| Connector Type | Usb Type a ,Usb Type B |
| Number of Pins | 4 |
| Outer Material | Nylon |
| Maximum Voltage | 5 volts_of_direct_current |
| Number of Items | 1 |
| Special Feature | Braided |
| Connector Gender | Male-to-Male |
| Specification Met | Usb |
| Compatible Devices | Scanner, Laptop, Fax Machine, Personal Computer, Printer |
| Data Transfer Rate | 480 gigabits_per_second |
| Full listing title | Printer Cable 20 FT, USB A to B 2.0 Printer Cable High-Speed Nylon Braided USB MIDI Cord Compatible with Hp,Epson,Brother,Dell,Lexmark,ect |
Ready to buy?
Printer Cable 20 FT, USB A to B 2.0 Printer Cable High-Speed Nylon Braided USB MIDI Cord Compatible with Hp,Epson,Brother,Dell,Lexmark,ect is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
![Kingwin USB 3.0 Dual Port PCI Bracket Cable with Built-In-20-Pin Header, Up to 5 Gbps for Maximum Transfer Speed, Extend Your USB 3.0 Port On Motherboard to Back Of Your Computer Case [KW-PCI2USB3]](https://m.media-amazon.com/images/I/51JJK+mvBBL._AC_SL1000_.jpg)
ZENOVAX THE X FACTOR IN EXCELLENCE
VGA Cable 6FT | VGA to VGA Cable Male to Male 15-Pin | High Resolution Monitor Cable Cord for Computer |…
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Asus ROG Xreal R1 AR glasses pre-orders start today at $849 — 240 Hz virtual gaming at 171 inches on PC…
- Mistral Medium 3.5 Local Inference: VRAM, Quantization & Tokens/sec on Consumer GPUs
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- Best Filming Kit for a PC Hardware YouTube Channel in 2026
- Sega Genesis Games Loaded Off a Vinyl Record — and What It Means for Retro Collectors
- Best Dock and Storage Combo for Handheld PC Gaming: JSAUX Dock + a Fast SSD
- Perplexity's Local-or-Cloud Router: What Hardware Runs the Local Half
- Build a Silent Home NAS on a Raspberry Pi 4 8GB With a SATA SSD (2026)
- Build a Pocket RetroPie Handheld on a Raspberry Pi Zero W (2026 BOM)
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- OpenAI Buys Ona: What Autonomous Codex Means for Local Coding Rigs
- Best Sim Racing Setup for 2026: Wheels, Shifters and Pedals
- FIDECO vs Unitek vs Vantec: Which SATA/IDE Adapter Boots Win98 from CompactFlash in 2026?
- Intel Nova Lake-S 22-Core vs AMD Ryzen 7 5800X: Is the Cache Chip Worth Upgrading?
- Silicon Motion PCIe 6.0: Nvidia AI Drives Consumer Storage
- Best SSD for a 1TB+ Steam Library in 2026: SATA vs NVMe Showdown
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- Forza Horizon 6 Cuts Load Times to 4 Seconds With Advanced Shader Delivery
- Best Gear for Online D&D and Virtual Tabletop Nights in 2026
- Raspberry Pi 4 8GB as a Headless Local-LLM Sidecar: llama.cpp Tuning, Quantization Matrix, and Real tok/s
- ROG Ally X vs Steam Deck OLED: Specs, Battery, Price (2026)
- Microsoft and Mistral Sign Multi-Billion Europe AI Infra Deal
- Best Webcam for PC Game Streaming Under $100 (2026)
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090