ElectroCookie
ElectroCookie PCIe to M.2 NVMe SSD HAT Board for Raspberry Pi 5 (X1001)
Bottom line: The ElectroCookie PCIe to M.2 NVMe SSD HAT Board for Raspberry Pi 5 is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category, priced around $12.80 on Amazon as of 2026-10-07. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Fully compatible with Electrocookie case B0DLWKVQGT and cooler B0DLWQ44H5.
- ✓ Backed by ElectroCookie's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Raspberry Pi 5 NVMe SSD HAT – Compatibility Notice If your SSD is not recognized or fails to boot with the Raspberry Pi 5, it is most likely due to incompatibility between the SSD and the Raspberry Pi 5. The HAT simply acts as a signal and power bridge and does not affect SSD compatibility. SSD controllers known to cause issues include: SMI2263XT, SMI2263EN, MAP1202, Phison series controllers Known Incompatible SSDs The following SSDs have been reported to show compatibility issues with Raspberry Pi 5: Inland TN446Corsair MP600Micron 2450Kingston OM8SEP4256Q-A0WD Blue SN550 / SN580WD…
SpecPicks Verdict
SpecPicks scored ElectroCookie PCIe to M.2 NVMe SSD HAT Board for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. ElectroCookie's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Boosted System Performance – Enjoy faster data processing and response times, ideal for projects requiring high-speed storage, with expanded storage options.
- M.2 Key-M NVMe SSD Supported – Designed for Raspberry Pi 5, this M.2 HAT supports 2230, 2242, 2260 and 2280 NVMe SSD sizes and includes a copper pillar holder for secure 2230, 2242 and 2260 SSD installation.
- Fully compatible with Electrocookie case B0DLWKVQGT and cooler B0DLWQ44H5.
- Power Source – The SSD shield is powered directly through the FFC PCIe ribbon; use a PD 27W power adapter for the Raspberry Pi 5.
- Packing List – Includes 1 x M.2 NVMe SSD HAT Board, 1 x Assembly Component Pack; Note Raspberry Pi 5, SSD drive, and power adapter are not included.
Full Specifications
| ASIN | B0DLW8RYD2 |
|---|---|
| Brand | ElectroCookie |
| Material | Acrylonitrile Butadiene Styrene (ABS), Plastic |
| Manufacturer | ElectroCookie |
| Hardware Platform | Raspberry Pi |
| Compatible Devices | Raspberry Pi 5 |
| Enclosure Material | Acrylonitrile Butadiene Styrene (ABS), Plastic |
| Hardware Interface | PCI Express x4 |
| Warranty Description | Warranty |
| Hard Disk Form Factor | 22 Millimeters |
| Supported Devices Quantity | 1 |
Ready to buy?
ElectroCookie PCIe to M.2 NVMe SSD HAT Board for Raspberry Pi 5 (X1001) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Sim Racing Wheels for PC and Console in 2026
- Best Budget GPU for Stable Diffusion: Why the RTX 3060 12GB Still Wins
- Intel llm-scaler-vllm PV 1.4 Adds Arc Pro B70 Support: What Local-LLM Builders Get
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- Best Racing Wheels and Controllers for Sim Racing in 2026
- 1-Trillion-Param LLM on 768GB of Optane vs a 12GB RTX 3060: What's Practical
- Ryzen 7 9800X3D vs Ryzen 9 9900X: Which Zen 5 CPU Wins in 2026?
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Apple Sues OpenAI Over Alleged Trade-Secret Theft: What It Means
- Raspberry Pi 5 16GB for Local LLMs: What Models Actually Fit?
- How to Identify Your Motherboard: A Step-by-Step Guide
- Run a Local LLM on a Raspberry Pi 4 (8GB) in 2026: What Actually Works and How Slow It Is
- Best Streaming Microphone for Twitch and YouTube in 2026
- Asus ROG Xreal R1 Brings 240 Hz to AR Glasses — What PC Gamers Should Know
- Voodoo5 5500 AGP Won't POST: Complete Troubleshooting Guide for 2026 Restorations
- Steam Deck OLED vs ROG Xbox Ally X: 2026 Comparison
- Best SSDs and Cloning Tools to Upgrade an Aging Gaming PC or Console in 2026
- DeepSeek V4 on an RTX 3060 12GB: What Actually Fits Locally
- Intelligence Index v4.1: The Agentic-Benchmark Shift and Your Local Rig
- Noctua NH-U12S vs DeepCool AK620 on Ryzen in 2026: Honest Pick
- Sound Blaster AWE32 vs AWE64: Which Belongs in Your DOS Build?
- RTX 3060 12GB in 2026: Is It Still a 1080p Value Champion?
- Best CPU Cooler for AM4 Ryzen in 2026
- Best GPU + Monitor Pairings for 1440p QD-Mini-LED Gaming in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090