Ikpek 20 Pack 2K3 Ohm Potentiometer Replacement for Sony PlayStation 5 PS5 Controller
Bottom line: The Ikpek 20 Pack 2K3 Ohm Potentiometer Replacement is a specs-and-price decision rather than a crowd-consensus one in the controllers & gamepads category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 【A Set of Tools】-- Helps to disassemble Controller and install more convenient.
- ✓ Backed by Ikpek's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
【What you get】-- 20 x Potentiometer, 1 x Screwdriver (Phillips #00), 1 x Tweezer, 1 x Spudger, 1 x Pry tools, 1 x Pry bar.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Ikpek 20 Pack 2K3 Ohm Potentiometer Replacement, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the controllers & gamepads category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Compatible model】-- 2K3 Ohm Potentiometer Only Compatible with PS5 Controller (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
- 【What you get】-- 20 x Potentiometer, 1 x Screwdriver (Phillips #00), 1 x Tweezer, 1 x Spudger, 1 x Pry tools, 1 x Pry bar.
- 【Solve Most Joystick Problem】-- Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
- 【Attentions】-- This product will require moderate soldering to install. Please search for installation videos on youtube above before purchasing.
- 【A Set of Tools】-- Helps to disassemble Controller and install more convenient.
Full Specifications
| Brand | Ikpek |
|---|---|
| Color | Turquoise |
| Unit Count | 20.0 Count |
| Compatibility | PS5, PS4, Xbox |
| Number of Packs | 20 |
| Compatible Devices | PS5 Controller |
| Full listing title | 20 Pack 2K3 Ohm Potentiometer Replacement for Sony PlayStation 5 PS5 Controller, Trim Pot Resistor Module Sensor for Dualsense ALPS Analog Joystick |
Ready to buy?
20 Pack 2K3 Ohm Potentiometer Replacement for Sony PlayStation 5 PS5 Controller, Trim Pot Resistor Module Sensor for Dualsense ALPS Analog Joystick is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Controllers & Gamepads
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best $1000 Prime Day Gaming PC: RTX 5060 Ti + 32GB RAM
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- Best Quiet CPU Cooler for Ryzen 7 3700X Silent Builds in 2026
- Noctua NH-U12S vs Cooler Master ML240L: Which Cools a 5800X?
- Radxa Rock 5B+ Review (2026): The Enthusiast's RK3588 Board
- The Sound Blaster Monopoly: How Creative Labs Owned PC Audio
- Best USB Microphone for Streaming in 2026: HyperX QuadCast 2 vs Blue Yeti
- GLM-5.2's 37k-Token Reasoning Outputs and What They Mean for Local Rigs
- Best AMD Ryzen 5000 CPU for Gaming in 2026: 5 Picks
- RTX 4090 vs RTX 5090 for Local LLM Inference: 24 GB vs 32 GB (2026)
- Best Gaming Room Lighting in 2026: LED Strips and Ring Lights
- Imaging a 1998 IDE Drive and Letting an LLM Rebuild Win98
- Is the RTX 3060 12GB Still Worth It for Gaming in 2026?
- Adding a Manual Shifter to Your Sim Rig: Is the Thrustmaster TH8A Worth It for the G29?
- Best Parts for a Local Coding-Agent Rig in 2026
- Intel Arc B580 & Arc Pro B60 24GB vs RTX 3060 12GB for Local LLMs
- 180Hz 1440p Gaming Monitors Hit Entry-Level Pricing
- Best GPU for 1080p Esports in 2026: Why the RTX 3060 12GB Still Delivers
- Ryzen 7 5800X3D vs Core i7-14700K on DDR4 for 1440p Gaming (2026)
- Qwen3 32B on Apple M4 Max vs M4 Pro: tok/s and Memory per Quant (2026)
- Jensen Huang Heads to Tokyo as Sega's 1996 Bet on Nvidia Is Remembered
- Cheapest 1440p GPU in 2026: Budget Buying Guide
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Which Open LLMs Actually Handle Tool-Calling on an RTX 3060?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090