LINKUP PCIE 5.0 Riser Cable
Bottom line: The LINKUP PCIE 5.0 Riser Cable ($88.96 on Amazon as of 2026-11-22 11:18 UTC): Full PCIe 5.0 x16 bandwidth up to 128GB/s with tuned impedance; main trade-off: needs a compatible vertical mount bracket, sold separately.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Full PCIe 5.0 x16 bandwidth up to 128GB/s with tuned impedance
- ✓ Backward-compatible with PCIe 4.0 and older builds
- ✓ Validated on ASUS WRX80SE and WRX90E Gen5 boards
- ✓ Ready for RTX 5090 and RX 9070 vertical mounts
- ✓ Multilayer shielding cuts crosstalk and EMI under load
Cons
- ✗ Needs a compatible vertical mount bracket, sold separately
- ✗ 19cm span may be too short for some full-tower routes
- ✗ Connector type must be picked correctly per case layout
- ✗ Tight ITX bends require careful seating to stay latched
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for LINKUP PCIE 5.0 Riser Cable, so this read rests on the manufacturer's listed specs and the current price in the graphics cards category (how we evaluate). Compare with similarly-priced alternatives in the graphics cards category before committing. On the listing's own facts, the case for it is "Full PCIe 5.0 x16 bandwidth up to 128GB/s with tuned impedance"; the main trade-off is "Needs a compatible vertical mount bracket, sold separately". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for graphics cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
- Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
- Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
- Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
- Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.
Full Specifications
| Brand | LINKUP |
|---|---|
| Color | Black |
| Model | AVA5 |
| Frequency | 16 GHz |
| Cable Type | Riser Cable |
| Unit Count | 1 Count |
| Item Length | 19 centimeters |
| Part Number | AG-P5-33VV-019BK-v3 |
| Connectivity | WiFi |
| Compatibility | PC |
| Connector Type | Pcie-cem |
| Number of Pins | 19 |
| Number of Items | 1 |
| Special Feature | Low Insertion Loss |
| Connector Gender | Male-to-Female |
| Specification Met | Pci-e 5.0 |
| Compatible Devices | DAN Cases A4-SFX, Lian Li A4-H2O, Gen4 Vertical Mount), NCASE FormD T1 (2-slot GPU, Phanteks Shift XT, XTIA XPROTO Mini |
| Data Transfer Rate | 128 gigabytes_per_second |
| Indoor Outdoor Usage | Indoor |
| Ethernet Cable Category | Cat 8 |
| Full listing title | LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | ITX Double Reverse | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 19cm (Total Length: 21.2cm) |
Benchmark data for other graphics cards
Ready to buy?
LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | ITX Double Reverse | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 19cm (Total Length: 21.2cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Graphics Cards
LINKUP PCIE 5.0 Riser Cable head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Used RTX 3090 for Local LLMs (Nov 2026): Real Prices, Speeds, Servicing
- Best Budget Streaming Setup in 2026: 5 Picks Under Budget
- Ollama vs LM Studio vs vLLM: Choosing a Local LLM Runner
- Best Gaming Headset Under $50 for Console + PC (2026)
- Linux Beats Windows 11 on AMD's Ryzen 9 9950X3D2
- Lenovo G02 Retro Handheld Ships Preloaded With Thousands of Games
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- Ryzen 7 5800X vs 5700X for Gaming: Is the $60 Gap Worth It?
- Intel Arc B580 for Local LLMs in 2026: 12GB for Under $300
- Old Massive Chieftec Full Tower: Homelab Gem or Junk?
- Gemma 4 31B-IT on a 12GB RTX 3060: What Fits, What Offloads, How Fast
- Building a 1999 GeForce 256 + Pentium III Win98 Rig in 2026
- Raspberry Pi 4 8GB Homelab in 2026: Jellyfin, Pi-hole and Home Assistant on One Board
- Windows XP Gaming Setup Guide: Hardware & Drivers (2025)
- Best Gaming Room Lighting in 2026: LED Strips and Ring Lights
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- Sony Trinitron FW900 Setup for Retro Gaming: Resolution Sweet Spots, Calibration, and Refresh-Rate Math
- ASRock Phantom Gaming 360 LCD Cooler Debuts With Strong Numbers
- $100 CPU Shootout: Ryzen 5 5500 vs Core i3-14100F vs i3-12100F
- Why Preassembled PCs Beat DIY Builds in 2026
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- Best Mouse and Mousepad for FPS Aim Training in 2026
- VibeThinker-3B on an RTX 3060 12GB: Reasoning in 3 Billion Params
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090