ElectroCookie Raspberry Pi 5 Case
Bottom line: The ElectroCookie Raspberry Pi 5 Case is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category, priced around $27.99 on Amazon as of 2026-10-07. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by ElectroCookie's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Raspberry Pi 5 NVMe SSD HAT – Compatibility Notice This NVMe SSD HAT for Raspberry Pi 5 shares the same circuit design as widely adopted M.2 HATs, featuring a PCB layout that’s been minimally customized to fit our case dimensions. As with the official Raspberry Pi Foundation M.2 HAT, it supports only 2230 and 2242 NVMe SSDs. If your SSD is not recognized or fails to boot with the Raspberry Pi 5, it is most likely due to incompatibility between the SSD and the Raspberry Pi 5. The HAT simply acts as a signal and power bridge and does not affect SSD compatibility. SSD controllers known to cause…
SpecPicks Verdict
SpecPicks scored ElectroCookie Raspberry Pi 5 Case using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. ElectroCookie's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Premium Aluminum Build The high-quality aluminum body not only provides durability, but also adds a sleek, modern touch to your desk, wall, or workshop. (*Note Not compatible with Raspberry Pi 4 due to different USB and Ethernet port placement.)
- Optimized for Top-Mounted M.2 HAT Boards Designed to support various M.2 HAT boards mounted above the Raspberry Pi 5 (*Note Installation underneath is not supported due to the internal layout).
- SSD Compatibility & Setup Info Please check SSD compatibility in the product description or by searching “Pi Benchmark” online. Boot drive setup instructions are also provided in the product description below, or you can follow official Raspberry Pi documentation and online tutorials.
- Active Cooling with Style Equipped with an RGB-lit PWM fan that turns on with system power and automatically adjusts its speed based on CPU temperature (*Note The lighting is not programmable, and the fan may not spin when the CPU is cool, or may run continuously if no OS or bootable drive is available to control it.).
- Wall-Mount Ready Features cross-shaped holes on the back for easy wall installation, helping you save desk space and create a clean, floating Raspberry Pi setup.
- Easy Access & Soft-Touch Power Button The SD card slot, USB, Ethernet, Power, and Micro HDMI ports remain fully accessible, while the soft-click power button feels smooth and responsive.
Full Specifications
| ASIN | B0DZ68TL2K |
|---|---|
| Brand | ElectroCookie |
| Color | 1.Silver |
| Material | Aluminum |
| Case Type | Raspberry Pi |
| Unit Count | 1.0 Count |
| Item Weight | 0.28 Kilograms |
| Manufacturer | ElectroCookie |
| Cooling Method | Air |
| Special Feature | Active Cooling with PWM Fan and RGB Lighting |
| Antenna Location | Programming |
| Compatible Devices | Raspberry Pi 5, M.2 HAT Boards (2230 and 2242 sizes, top-mounted) |
| Enclosure Material | Aluminum |
| Total Internal Bays | 1 |
| Warranty Description | Warranted |
| Internal Bays Quantity | 1 |
| Recommended Uses For Product | Programming |
| Other Special Features of the Product | Active Cooling with PWM Fan and RGB Lighting |
| Full listing title | ElectroCookie Raspberry Pi 5 Case, Aluminum Compact Case with M.2 NVMe SSD PCIe HAT and Active RGB Lighting Cooler (Black Case + M.2 HAT[ECR5 SSDS]) |
Ready to buy?
ElectroCookie Raspberry Pi 5 Case, Aluminum Compact Case with M.2 NVMe SSD PCIe HAT and Active RGB Lighting Cooler (Black Case + M.2 HAT[ECR5 SSDS]) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- GLM-5.2 With CPU Offload: Ryzen 7 5800X + RTX 3060 12GB Tested
- Pelican-Style Filament Dry Box: The Adafruit Build, Explained
- Period-Correct 2002 LAN Party Build Around an Athlon XP and GeForce 4 Ti
- AI-Driven Win9x Driver Install: How Vision-LLMs Tame Vintage Installers (2026)
- Amazon RTX 5060 Deal: $324 Budget GPU for 1080p Gaming
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- One Desk, Two Sims: Swapping a G29 Wheel and an Extreme 3D Pro Stick
- KOORUI 27" 4K QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Gaming Monitor Wins?
- Genesis Mini vs SNES Classic vs a Pi RetroPie in 2026
- CompactFlash to IDE 50-Pin Adapters: A Retro Storage Buyer's Guide for 2026
- NVIDIA RTX A6000 48GB Review: The Workstation Card That Still Owns Local 70B Inference (2026)
- Prime Day 2026: Logitech Gaming Mice Drop Up to 47% Off
- RTX 4090 AI Workstation vs AMD MI300X: 2025 Guide
- Self-Host Immich Photo Backup on a Raspberry Pi 4 8GB in 2026
- Best Gaming Gifts Under $60 in 2026
- Ryzen 7 5800X vs 5700X for 1080p Gaming: Which AM4 Chip Wins in 2026?
- vLLM vs Ollama for a Single-User 12GB Rig in 2026
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- CompactFlash vs SATA-to-IDE: The Best Silent Boot Drive for a Win98 PC
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive: The CompactFlash + IDE Workflow
- Ryzen 5 2600 vs Core i7-9700K for a First 1080p Gaming Build (2026)
- Best GPU for AI Workstations in 2026
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Best Sim Racing Wheel Under $300 in 2026: Force Feedback That's Worth It
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090