Skip to main content
Sintech IDE/PATA 40Pin HDD to SATA Motherboard Adapter Card with 30cm SATA 7+15pin Cable for Desktop 3.5 Inch Hard Disk Drive
Sintech

Sintech IDE/PATA 40Pin HDD to SATA Motherboard Adapter Card

Bottom line: Per its Amazon listing, the Sintech IDE/PATA 40Pin HDD to SATA Motherboard Adapter Card: alow 3.5 Inch IDE HDD to work as 3.5 Inch SATA HDD in desktop; supports IDE 66/100/133MB/s.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Alow 3.5 Inch IDE HDD to work as 3.5 Inch SATA HDD in desktop
  • ✓ Backed by Sintech's warranty and support channels

Cons

  • ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Sintech IDE/PATA 40Pin HDD to SATA Motherboard Adapter Card, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Alow 3.5 Inch IDE HDD to work as 3.5 Inch SATA HDD in desktop
  • Supports IDE 66/100/133MB/s
  • Suport all IDE 40Pin Drives up to 1000GB
  • Just plug and play,no driver needed
  • No need for an extra Molex power supply because IDE HDD can get power from SATA power Port

Full Specifications

BrandSintech
ModelST4057
Cable TypeSerial
Unit Count1 Count
Item Length30 centimeters
Part NumberST4057
Connector TypeSata 22pin
Number of Pins40
Maximum Voltage12 volts_of_direct_current
Number of Items1
Special FeatureData Transfer
Connector GenderMale-to-Female
Compatible DevicesDesktop
Included ComponentsSATA cable
Indoor Outdoor UsageIndoor
Compatible Phone ModelsNo Compatible Phone Models
Recommended Uses For ProductConnecting IDE hard drives to SATA motherboards
Other Special Features of the ProductData Transfer
Full listing titleSintech IDE/PATA 40Pin HDD to SATA Motherboard Adapter Card with 30cm SATA 7+15pin Cable for Desktop 3.5 Inch Hard Disk Drive

Ready to buy?

Sintech IDE/PATA 40Pin HDD to SATA Motherboard Adapter Card with 30cm SATA 7+15pin Cable for Desktop 3.5 Inch Hard Disk Drive is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →