8BitDo All-Button Arcade Controller for Switch/Switch 2 & Windows
Bottom line: The 8BitDo All-Button Arcade Controller for Switch/Switch 2 & Windows: Leverless all-button layout for faster, more precise fighting-game inputs; main trade-off: switch 2 support gated behind a firmware update.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Leverless all-button layout for faster, more precise fighting-game inputs
- ✓ Hot-swappable PCB with 16 Kailh Wizard low-profile mechanical switches
- ✓ Ultra-thin 1.6cm profile, roughly A4-sheet footprint for portability
- ✓ Three connection modes: Bluetooth, 2.4G, and wired
- ✓ Works on Switch, Switch 2, and Windows (Switch 2 needs latest firmware)
Cons
- ✗ Switch 2 support gated behind a firmware update
- ✗ 2.4G mode is Windows-only, not available for Switch
- ✗ Leverless layout has a learning curve versus a traditional stick
- ✗ No PlayStation or Xbox console compatibility listed
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 8BitDo All-Button Arcade Controller for Switch/Switch 2 & Windows, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the controllers & gamepads category before committing. On the listing's own facts, the case for it is "Leverless all-button layout for faster, more precise fighting-game inputs"; the main trade-off is "Switch 2 support gated behind a firmware update". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatible with Switch/Switch 2 and Windows. 3 connection modes - Connect to Switch via Bluetooth, to Windows via 2.4G, or to either device via wired. (Switch 2 compatibility requires latest firmware update)
- Leverless. Ultimate precision – Features an all-button arcade layout with quad-movement design for unmatched accuracy and ultra-fast inputs. Execute combos with greater speed and control.
- Ultra thin and compact – Nearly the size of an A4 sheet and as thin as 1.6 cm. Fight anytime, anywhere.
- Hot-swappable PCB - Features 16 Kailh Wizard low-profile mechanical switches, allowing you to customize with other switches that fit your needs.
- Programmable and practical – Remap P1, P2, P3, and P4 with fast mapping. Includes replaceable lock caps and independent control panel.
Full Specifications
| Full listing title | 8BitDo All-Button Arcade Controller for Switch/Switch 2 & Windows – Bluetooth, 2.4G, Wired Connectivity, Low-profile Mechanical Switches, 4 Programmable Buttons, Hot-swappable PCB |
|---|
Ready to buy?
8BitDo All-Button Arcade Controller for Switch/Switch 2 & Windows – Bluetooth, 2.4G, Wired Connectivity, Low-profile Mechanical Switches, 4 Programmable Buttons, Hot-swappable PCB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Controllers & Gamepads
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Imaging Vintage IDE Drives to Preserve 90s Game CDs
- RTX 5090 vs RTX Spark for Local LLMs: 32 GB GDDR7 vs 128 GB Unified (2026)
- Best Wireless Gaming Controller for PC and Console (2026)
- Is the KOORUI 27-Inch 4K QD-Mini LED a Good Match for an RTX 3060?
- Best GPU for Running Llama 70B Locally in 2026
- Claude Sonnet 5 Costs ~$2.29/Task: When an RTX 3060 Rig Breaks Even
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Homelab Month One: Raspberry Pi 4 or a Ryzen 5 Mini-PC?
- Best GPU for Forza Horizon 6 at 1080p & 1440p in 2026
- Best Gaming Webcam and Streaming Setup in 2026
- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- Qwen 3.6 35B-A3B on RTX Spark: Which Surface Laptop Ultra Memory Config to Buy
- Ryzen 7 5800X vs 5700X: Best 8-Core AM4 CPU 2026
- Best Streaming & Content-Creation Starter Kit in 2026
- Qwen3.8 Max vs Claude Opus 4.8: What the Cost-Per-Task Gap Means for Local Rigs
- Building a Voodoo 2 SLI Windows 98 Gaming Rig in 2026: Period-Correct Parts That Are Still Findable
- MSI MPG 322UR QD-OLED X24: 4K 240Hz Performance Analyzed
- Best Retro Gaming Consoles and Controllers to Buy in 2026
- Best Single-Board Computers for Home Lab in 2026
- MSI RTX 3060 12GB in 2026: Still the Right 1080p GPU?
- Running a 1-Trillion-Parameter LLM on 768GB of Cheap Optane
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Jensen Huang Heads to Tokyo as Sega's 1996 Bet on Nvidia Is Remembered
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090