DELXING
DELXING USB 3.0 to SATA IDE Adapter Hard Drive Reader for 2.5"/3.5" IDE SATA HDD/SSD
Bottom line: The DELXING USB 3.0 to SATA IDE Adapter Hard Drive Reader is a specs-and-price decision rather than a crowd-consensus one in the drives & media category, priced around $21.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by DELXING's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored DELXING USB 3.0 to SATA IDE Adapter Hard Drive Reader using a rating × review-volume × price-fit model applied to published specs and reviews across the drives & media category. DELXING's drives & media lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for drives & media of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Universal Compatibility for SATA IDE Hard Drives】：Our hard drive adapter compatible with 2.5 inch & 3.5 inch IDE SATA HDD/SSD It supports up to 8TB large capacity hard drives, perfectly solving the needs of old hard disk data reading, backup and migration. Warm note: Two IDE hard drives cannot be used simultaneously.
- 【Dual USB 3.0 Interface and 5Gbps Fast Speed】: Equipped with USB 3.0 dual interfaces, this hard disk converter fits almost laptops, desktops with USB or Type-C ports. It delivers a high-speed transmission rate up to 5Gbps, 10x faster than USB 2.0 (480Mbps), greatly reducing the waiting time for large file transfer, and is backward compatible with USB 2.0/1.1 for wider compatibility.
- 【Stable Power Supply】: Comes with a 12V power adapter, which provides stable and sufficient power for 3.5 inch large-capacity hard drives, ensuring stable operation of the hard disk during high-speed transmission.Warm note: 3.5 inch hard drives must be connected to the external power supply to work properly.
- 【Driver-Free Plug and Play, Friendly for Beginners】: No complicated driver installation is required, this external hard drive reader supports plug and play, you can get it work within seconds. The built-in indicator lights clearly show the power and working status of the adapter at a glance
- 【Wide System Compatibility】: This SATA IDE to USB adapter is widely compatible with Windows 11/10/8/7/Vista/XP, Mac OS, Linux. It is an ideal tool for home and office data backup, hard disk data recovery, system migration, cross-device file sharing, and the best choice to retrieve precious photos, videos and work files from your old IDE hard drives.
Full Specifications
| Brand | DELXING |
|---|---|
| Color | Black |
| Unit Count | 1.0 Count |
| Connectivity | USB |
| Model Number | SA28 |
| Compatibility | Mac, Linux |
| Input Voltage | 12 Volts |
| Built-In Media | 12V/2A Power Adapter, 4-PIN Power Cable, USB 3.0 Cable, USB TO IDE SATA Adapter |
| Connector Type | USB Type C |
| Item Dimensions | 2.44 x 0.58 x 3.74 inches |
| Mfr Part Number | SA28 |
| Number of Items | 1 |
| Number of Ports | 3 |
| Compatible Devices | Desktop, Laptop |
| Warranty Description | 30 days money back or replacement |
| Smart Home Compatibility | Not Smart Home Compatible |
| Item dimensions L x W x H | 2.44 x 0.58 x 3.74 inches |
| Full listing title | USB 3.0 to SATA IDE Adapter Hard Drive Reader for 2.5"/3.5" IDE SATA HDD/SSD, Dual Interface Hard Disk Converter 5Gbps External Hard Drive Adapter Plug and Play with 12V/2A Power Supply |
Ready to buy?
USB 3.0 to SATA IDE Adapter Hard Drive Reader for 2.5"/3.5" IDE SATA HDD/SSD, Dual Interface Hard Disk Converter 5Gbps External Hard Drive Adapter Plug and Play with 12V/2A Power Supply is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Drives & Media
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Gemma 4 12B Runs Local: Best 12GB GPUs for Google's New Open Model
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
- MSI RTX 3060 12GB in 2026: Still the Right 1080p GPU?
- T9 Keyboard for Your Smartphone: 2026 Maker's Guide
- Best Hardware for Running Small Language Models Locally in 2026
- Best Raspberry Pi Projects for College Students in 2026: 8 Builds on a Pi 4 8GB
- Build a Jellyfin Media Server on a Raspberry Pi 4 in 2026
- Best Streaming Starter Kit for Creators in 2026
- Best Budget Gaming CPU in 2026: 5 AM4 and Entry Picks Ranked
- Best Budget SSD for a Steam Library: NVMe vs SATA Game Load Times
- GPT-5.5 Instant Shipped: What an RTX 3060 12GB Local Stack Covers When OpenAI Retires a Model
- Best Budget PC Gaming Peripherals in 2026: 5 Picks That Punch Above Their Price
- Gemma 4 and Larger Qwen 3.6: What Hardware You'll Actually Need
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5080
- Intel Arc A770 LLM Performance: Local Inference Guide
- Best Mini-ITX Case for a Small Form Factor Gaming PC in 2026
- RTX 5090 vs RTX 5080: Which Should You Buy in 2026?
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- Best Budget SATA SSD for Gaming in 2026
- Rescue a Dying Retro PC: Image Your IDE Drive to CompactFlash First
- Best Budget Gaming PC Build Parts in 2026: 5 Core Picks
- Samsung 870 EVO vs Crucial BX500: Best SATA SSD 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090