BTF-LIGHTING FCOB COB RGBCCT Color Changing LED Strip with Remote
Bottom line: The BTF-LIGHTING FCOB COB RGBCCT Color Changing LED Strip with Remote is a specs-and-price decision rather than a crowd-consensus one in the rgb & lighting category, priced around $48.99 on Amazon as of 2026-10-21 22:28 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings. Another in-stock pick with the same 16.4ft LED strip: the Govee Smart RGB LED Strip Lights, $19.98 on Amazon as of (price may vary).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by BTF-LIGHTING's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored BTF-LIGHTING FCOB COB RGBCCT Color Changing LED Strip with Remote using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Ultra Bright and Uniform】16.4FT DC24V 840LED/m.Total 4200 LEDs.Flip RGBCCT Chip On Board(FCOB). Adopting high brightness LED as the light source ensures brightness while maintaining colour consistency.Compared with traditional 5050SMD 3528SMD light strips, FCOB light strips dense light-emitting units create a brighter, softer, and more uniform light, avoiding black in the middle area.
- 【Color Changing and Tunable Color Temperature】FCOB RGBCCT light strip not only enables entertainment ambient sense lighting with RGB colors, but also general home lighting with CCT colors. One light strip with multiple utilizations.Work with the SP115E controller and you can get even more impressive lighting effects.
- 【UL Listed for safety assurance】BTF-LIGHTING LED strips carry the internationally recognized UL certification. Engineered with premium double-layer copper PCB for superior conductivity and heat dissipation. Backed by a 65,000+ hour lifespan and 24/7 dedicated customer support. Easy peel-and-stick installation with strong 3M adhesive backing - no tools or wiring skills needed!For installation guidance, troubleshooting, or warranty service, our customer service team are always ready to assist you.
- 【Wide Application】Our FCOB LED strip light is perfect for various interior decoration.Such as living room, hallway, bedroom, kitchen, accent lighting, cabinet lighting, stair, mirror, corridor, DIY backlight, DIY lighting, special use and other commercial and residential lighting projects.Come with a strong self adhesive backing.Tips:Before installation, please thoroughly clean and dry the installation surface.
- 【Easy to Install】With 3M strong adhesive tape, the strip lights can be firmly stick on wooden or lacquer wall and other clean surfaces.You just need to wipe clean the location where the light strip is to be attached, peel off the tape on the back of the light strip and stick it on, then attach it to the power supply.
- 【Package included】 1X 16.4FT FCOB RGBCCT LED strip,1XDC24V supply,1X RF Controller,2X 6pin strip to wire connectors,1X 6pin strip to strip connectors,3X LED Strip fixed Clips, 1X15cm 6pin 24AWG wire cable. The 6pin connectors and 6pin cable wire can be used for Extending your FCOB strip light, Splicing ,corner connection.
Full Specifications
| Brand | BTF-LIGHTING |
|---|---|
| Color | RGBCCT |
| Theme | Home Decoration |
| Voltage | 24 Volts (DC) |
| Occasion | Christmas |
| Unit Count | 1.0 Count |
| Item Length | 16.4 Feet |
| Light Color | Multicolor |
| Model Number | FCOB5M840LRGBCCTSP115E24V |
| Power Source | DC |
| Number of Items | 1 |
| Special Feature | Color Changing and Uniform light, Dimmable and Tunable, No Light spot, RGB colors and Tunable Color Temperature, Remote Controlled |
| Light Source Type | LED |
| Additional Features | Color Changing and Uniform light, Dimmable and Tunable, No Light spot, RGB colors and Tunable Color Temperature, Remote Controlled |
| Included Components | 16.4FT FCOB RGBCCT LED strip, DC24V supply, RF Controller, 2x 6pin strip to wire connectors, 1x 6pin strip to strip connectors, 3x LED Strip fixed Clips, 15cm 6pin 24AWG wire cable |
| Indoor Outdoor Usage | Indoor |
| Indoor/Outdoor Usage | Indoor |
| Connectivity Protocol | RF |
| Water Resistance Level | Not Water Resistant |
| Number of Light Sources | 4200 |
| Full listing title | BTF-LIGHTING FCOB COB RGBCCT Color Changing LED Strip with Remote,UL Listed Flexible High Density DC24V 16.4FT RGB+Tunable White 3000K-6000K RF Remote Controller 12mm Width 3M Tape for Home Decor |
Ready to buy?
BTF-LIGHTING FCOB COB RGBCCT Color Changing LED Strip with Remote,UL Listed Flexible High Density DC24V 16.4FT RGB+Tunable White 3000K-6000K RF Remote Controller 12mm Width 3M Tape for Home Decor is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- 7800X3D vs 5700X3D: Is the AM5 Upgrade Worth It?
- AMD Radeon RX 9070 GRE Review: Thoroughly Midrange
- Intel Arc Stable Diffusion Benchmark: A770, B580 & B60 (2025)
- Sound Blaster X G6 on a Win98 + Voodoo3 Build: Period-Correct Audio That Beats On-Board
- Best Budget Build for Local LLMs in 2026: How Far a Ryzen 5 5600G + RTX 3060 Gets You
- How to Make Steam Deck Intros Last Longer (2026)
- Intel Arc Stable Diffusion Guide: Setup & Benchmarks 2025
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- Intel i7-9700K vs Ryzen 7 5700X for a Budget 2026 Gaming Build
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Best CPU for Gaming in 2026: 5 Picks Tested
- Best Budget 1080p Gaming PC Parts in 2026: 5 Picks
- Building a 1998 Voodoo2 SLI Gaming PC With CF Storage in 2026
- Is the Ryzen 7 5800X Still Worth It for 1440p Gaming in 2026?
- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Best SSD for a Retro PC Build: SATA, CompactFlash, or IDE Bridge?
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Best Budget Ryzen Gaming PC Build for 1080p in 2026
- Build a Silent Raspberry Pi 5 NAS with NVMe and Active Cooling in 2026
- Open-Source NVIDIA NVK Vulkan Driver Now Supports DLSS
- Arc Pro B60 Dual 48GB vs Dual RTX 3060 12GB for 70B Local LLMs (2026)
- Best CPU Cooler for AM5 Overclocking: Noctua NH-U12S vs Cooler Master ML240L
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090