be quiet! Light Base 500 PC Case
Bottom line: Per its Amazon listing, the be quiet! Light Base 500 PC Case: the rear exhaust fan is a Pure Wings 3 120mm PWM.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ The rear exhaust fan is a Pure Wings 3 120mm PWM
- ✓ Backed by be quiet!'s warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for be quiet! Light Base 500 PC Case, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the pc cases category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- The angled fan frame in the side is not only a testament to elegance and functionality but also directs more air towards the GPU – a part that traditionally requires a lot of it. It provides a neat cutout that works as an efficient air intake. For an easy installation of fans, it slides out to the top. Cable management is easier than ever before with a channel that hides your equipment elegantly. If you install additional fans in the bottom, they line up perfectly with the case floor due to a lowered fan bay.
- Light Base 500 features 4 preinstalled Pure Wings 3 fans. The rear exhaust fan is a Pure Wings 3 120mm PWM, the intake fans on the side are Pure Wings 3 120mm PWM fans with reversed fan blades. All fans are optimized for maximum airflow, while reducing noise-generating turbulences with their specially shaped fan blades at the same time. The reversed fan blades make sure that their pretty side is always visible.
- Light Base 500 might appear compact, but it comes with enough space for a 360mm radiator, an ATX motherboard and graphics cards up to 400mm length. The smart design of the drive bracket features slots for 2 HDDs and 2 SSDs at the same time, without impeding the room for cable management behind the motherboard tray.
- The motherboard tray fully supports backside connector designs like Asus BTF (Back to Future), MSI Project Zero, and Gigabyte Project Stealth, for a true and cable-free view. To enable backside connector support without giving up a drive slot, the position of the PSU and drive bracket are simply swapped!
- Do you prefer a stealthy look? If so: we’ve got you covered with the Light Base 500, a perfect blend of the classic be quiet! style with no LED lighting and modern form. Enjoy your next gaming session without flashing lights in your peripheral view.
Full Specifications
| Brand | be quiet! |
|---|---|
| Color | Black |
| Material | Metal |
| Case Type | Mid Tower |
| Model Name | BGW83 |
| Model Number | BGW83 |
| Compatibility | PC |
| Cooling Method | Air |
| Mfr Part Number | BGW83 |
| Antenna Location | Gaming |
| Compatible Devices | ATX motherboards, graphics cards up to 400mm, 360mm radiator, standard computer components |
| Enclosure Material | Metal |
| Total USB 3.0 Ports | 2 |
| Supported Motherboard | ATX |
| Internal Bays Quantity | 4 |
| Item Dimensions D x W x H | 17"D x 12"W x 16"H |
| Motherboard Compatability | ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming |
| Global Trade Identification Number | 04260052193808 |
| Full listing title | be quiet! Light Base 500 PC Case, Fully Windowed Front and Side Panel | Show case, Dual Chamber, Mid Tower Gaming Computer Case, 4 Pure Wings 3 PWM Fans, no RGB, Backside Connector Design |
Ready to buy?
be quiet! Light Base 500 PC Case, Fully Windowed Front and Side Panel | Show case, Dual Chamber, Mid Tower Gaming Computer Case, 4 Pure Wings 3 PWM Fans, no RGB, Backside Connector Design is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- Build a Raspberry Pi Retro Handheld in 2026: Parts and Setup
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- Best Parts for a CPU-Offload Local LLM Build in 2026
- AI-Driven Driver Recovery for SB Live! and Audigy on Win98: How an LLM Watches the Installer
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- Sound BlasterX G6 on a Retro Windows XP Rig: USB Audio for Period-Correct Builds
- Microsoft's SkillOpt Boosts GPT-5.5 With Just a Trained Markdown File
- Raspberry Pi Projects for Students (2025 Guide)
- Intel Arc B580 for Local LLMs in 2026: 12GB for Under $300
- That $850 Prebuilt With $1,200 of Parts: What the Math Actually Says
- PiKVM Hardware Guide 2026: Boards, Kits & Storage
- SATA vs NVMe for a Ryzen 5800X Gaming Build: Does It Matter?
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 4090
- Best CPU Cooler for Gaming PCs in 2026: Air & AIO Picks
- Gemma 4 26B-A4B (NVFP4) vs Qwen 3.6 27B: Local Speed vs Quality (Nov 2026)
- OpenAI and Anthropic Are Giving Startups Free Compute — Here's the Local Rig That Replaces It
- Best NVMe Boot SSD for an AM4 Ryzen Build: 970 EVO Plus vs the Budget Field
- CRT Monitor for Retro Gaming: What Actually Matters in 2025
- Gemma-4-Harmonia-31B Heretic: What the Uncensored Merge Adds Over Base Gemma 4
- Best Used Ryzen CPU for Budget AM4 Gaming Upgrades in 2026
- Qwen 3.6 35B-A3B vs Qwen 3.6 27B Dense: Which Local LLM Wins on a Single 24GB GPU?
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090