A-Tech RAM 16GB Kit (2x8GB) DDR3 1333 MHz PC3-10600 DIMM
Bottom line: The A-Tech RAM 16GB Kit DDR3 1333 MHz PC3-10600 DIMM: 16GB total (2x8GB) doubles the common 8GB ceiling on older DDR3 desktop builds; main trade-off: 1333MHz is the slow end of DDR3; 1600MHz kits exist for similar money.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 16GB total (2x8GB) doubles the common 8GB ceiling on older DDR3 desktop builds
- ✓ Standard 1.5V DDR3, so no low-voltage memory controller required
- ✓ Lifetime warranty from A-Tech on every order
- ✓ US-based tech support available before, during, and after purchase
Cons
- ✗ 1333MHz is the slow end of DDR3; 1600MHz kits exist for similar money
- ✗ CL9 latency is loose compared to CL7/CL8 enthusiast DDR3
- ✗ 2Rx8 dual-rank can limit slot population on some older chipsets
- ✗ Non-ECC and unbuffered, so unusable in ECC servers or workstations
Manufacturer description
The A-Tech 16GB DDR3 kit is a straightforward capacity upgrade for older desktop platforms that still run on 240-pin DDR3 DIMMs. You get two 8GB modules rated at 1333MHz (PC3-10600) with CL9 timings, a 2Rx8 dual-rank layout, and standard 1.5V operation, so it drops into non-ECC unbuffered desktop boards without needing a low-voltage-capable memory controller. That configuration matters on Sandy Bridge, Ivy Bridge, AM3+ and similar era systems where the board caps out at four DIMM slots and 8GB per slot. Moving from 8GB to 16GB is the upgrade you feel on a retro or secondary build: more…
SpecPicks Verdict
SpecPicks scored A-Tech RAM 16GB Kit DDR3 1333 MHz PC3-10600 DIMM using a rating × review-volume × price-fit model applied to published specs and reviews across the memory & ram category. A-Tech's memory & ram lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for memory & ram of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this 16GB kit work in my desktop?
It fits desktop boards that take 240-pin DDR3 non-ECC unbuffered DIMMs at 1.5V. A-Tech advises verifying your system's supported memory specs before purchase, since maximum capacity and supported ranks vary by motherboard.
Is this one 16GB stick or two 8GB sticks?
It is a two-module kit: 2 x 8GB DDR3 DIMMs totaling 16GB, meant to be installed as a matched pair in two slots.
What speed and timings does this RAM run at?
DDR3 1333MHz, also listed as PC3-10600 or PC3-10600U, with CL9 timings, 2Rx8 dual-rank organization, and 1.5V standard DDR3 voltage.
Can I use this in a server that needs ECC memory?
No. These are non-ECC unbuffered UDIMMs, so they will not work in systems that require ECC or registered/buffered memory.
Does A-Tech warranty this memory?
A-Tech states it provides a lifetime warranty on all orders and offers complimentary US-based tech support before, during, and after purchase. Check the product listing for current warranty terms.
Key Features
- 16 GB Kit ( 2 x 8 GB Modules ) | DDR3 1333MHz ( PC3-10600 / PC3-10600U ) | DDR3 DIMM ( 240-Pin ) | Non-ECC UDIMM ( Unbuffered DIMM ) | 2Rx8 - Dual Rank x8 | 1.5V - DDR3 Standard Voltage
- High performance RAM Memory upgrade compatible with select DESKTOP PC Computer models | *Please verify the supported memory (RAM) specifications of your system prior to purchase to ensure compatibility*
- Easy to install and boosts the performance of your system by speeding up loading times, improving system responsiveness, and increasing your system's ability to handle greater workloads
- All modules undergo quality assurance testing to ensure dependable and reliable performance
- A-Tech provides a Lifetime Warranty for all orders & offers complimentary United States based Tech Support before, during, & after your purchase
Full Specifications
| Brand | A-Tech |
|---|---|
| Voltage | 1.5 Volts |
| RAM Size | 16 GB |
| Model Name | A-Tech |
| Form Factor | DIMM |
| Memory Speed | 1333 MHz |
| Model Number | AT8G2D3D1333ND8N15V |
| Compatibility | PC |
| Number of Pins | 240 |
| Mfr Part Number | AT8G2D3D1333ND8N15V |
| Memory Generation | DDR3 |
| Compatible Devices | Desktop, Workstation |
| Data Transfer Rate | 10600 Megabytes Per Second |
| Memory Form Factor | UDIMM |
| Additional Features | High Performance |
| Computer Memory Size | 16 GB |
| Warranty Description | Lifetime Warranty |
| RAM Memory Technology | DDR3 |
| Column Address Strobe Latency | 9 |
| Full listing title | A-Tech RAM 16GB Kit (2x8GB) DDR3 1333 MHz PC3-10600 DIMM - Desktop Computer Memory - CL9 2Rx8 1.5V 240-Pin UDIMM Non-ECC Unbuffered Upgrade Modules |
Ready to buy?
A-Tech RAM 16GB Kit (2x8GB) DDR3 1333 MHz PC3-10600 DIMM - Desktop Computer Memory - CL9 2Rx8 1.5V 240-Pin UDIMM Non-ECC Unbuffered Upgrade Modules is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Memory & RAM
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSD in 2026: Crucial BX500 vs Samsung 870 EVO vs WD Blue vs SanDisk
- Adafruit's Cyberdeck Raspberry Pi Music Workstation Guide Lands
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Why AI Memory Bandwidth Matters: From Micron's HBM to Your GDDR6
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming + Local-AI Build
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- Claude Sonnet 5 Costs ~$2.29/Task: When an RTX 3060 Rig Breaks Even
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- LiteLLM as a Fallback Router: Keep Working When Limits Hit
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- Qwen 3.6 27B Matches Sonnet 4.6 on Artificial Analysis Agency
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Best 4K Gaming Monitor Under $700 in 2026
- Best Internal SSDs Under $100 in 2026
- Why Cheap Monitors Use HDMI Instead of DisplayPort
- Raspberry Pi Projects on GitHub: 2025 Guide
- DualSense vs GameSir G7 SE for PC Gaming in 2026: Which Controller Wins?
- Building a Period-Correct Windows 98 SE Gaming PC in 2026
- Local AI and Gaming Setup Picks 2026: 5 Buys With Price Anchors
- Ryzen 7 5800X + RTX 5060 Bundle Drops to $439 With a Free CPU Cooler
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- RTX 3060 12GB for ComfyUI & Stable Diffusion: The VRAM Budget Pick (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090