Skip to main content
LJY 75 Pcs ESD Anti Static Bags 3-Size Variety Pack, Zipper Shielding Bags for Motherboard, PCB, RAM, IC Chips & Electronic Components Antistatic Bag Pc Packing Kit(S/M/L)
LJY

LJY 75 Pcs ESD Anti Static Bags 3-Size Variety Pack

Bottom line: The LJY 75 Pcs ESD Anti Static Bags 3-Size Variety Pack: 75 bags across 3 sizes - 25 each of 20x15cm, 15x10cm, and 12x8cm; main trade-off: 20x15cm top size is too small for a full ATX motherboard.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 75 bags across 3 sizes - 25 each of 20x15cm, 15x10cm, and 12x8cm
  • ✓ Metallized shielding layer forms a Faraday cage, not just surface-dissipative pink poly
  • ✓ Zipper closure reseals, so bags survive repeated part swaps
  • ✓ Largest 20x15cm size fits full-size PCBs and RAM sticks with room to seal

Cons

  • ✗ 20x15cm top size is too small for a full ATX motherboard
  • ✗ Even 25/25/25 split may leave you short on whichever size you use most
  • ✗ Silver-gray shielding film is opaque - you cannot see contents without opening
  • ✗ No pre-printed label field, so you supply your own marker or stickers

Manufacturer description

The LJY ESD Anti Static Bags kit solves the problem every builder hits mid-upgrade: nowhere safe to set down a motherboard, a stick of RAM, or a pulled GPU. You get 75 zipper shielding bags split evenly across three sizes - 25 at 20x15cm (7.9x5.9in), 25 at 15x10cm (5.9x3.9in), and 25 at 12x8cm (4.7x3.2in) - so a full ATX board, a PCB, and a loose IC chip each get a bag that actually fits. The metallized layer forms a Faraday cage, shielding contents from electrostatic discharge and electromagnetic interference during storage and transport, not just surface-dissipating like cheaper pink poly…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for LJY 75 Pcs ESD Anti Static Bags 3-Size Variety Pack, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the motherboards category before committing. On the listing's own facts, the case for it is "75 bags across 3 sizes - 25 each of 20x15cm, 15x10cm, and 12x8cm"; the main trade-off is "20x15cm top size is too small for a full ATX motherboard". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many bags do you get and what sizes?

75 total, split 25 each across three sizes: 20x15cm (7.9x5.9in), 15x10cm (5.9x3.9in), and 12x8cm (4.7x3.2in).

Will a motherboard fit in these bags?

The largest bag is 20x15cm (7.9x5.9in), which suits Mini-ITX boards, PCBs, and expansion cards. A full ATX board at roughly 30x24cm will not fit - use these for the components instead.

Are these shielding bags or just anti-static bags?

LJY specifies shielding construction that forms a Faraday cage effect against electrostatic discharge and electromagnetic interference, which is the metallized type used for storage and transport of sensitive parts.

Do the bags actually reseal, or are they open-top?

They use a zipper closure, so you can open and reseal the same bag across multiple part swaps rather than taping it shut.

Are these good for storing RAM, GPUs, and IC chips together?

Yes - the three-size mix is built for that range. Use the 12x8cm bags for IC chips and small parts, 15x10cm for RAM modules, and 20x15cm for PCBs and cards. Bag each part separately rather than stacking loose components in one bag.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【Comprehensive 3-Size Variety Pack】 - This bulk set includes 75 anti-static bags in 3 most-needed sizes: 25 pcs of 20x15cm (7.9"x5.9"), 25 pcs of 15x10cm (5.9"x3.9"), and 25 pcs of 12x8cm (4.7"x3.2"). Perfect for organizing and protecting a wide range of electronic components from small IC chips to larger PCBs
  • 【Reliable ESD Shielding Protection】 - Constructed with specialized materials that form a Faraday cage effect, these bags provide superior shielding against electrostatic discharge (ESD) and electromagnetic interference, ensuring your sensitive electronics are safe during storage or transport
  • 【Convenient Zipper & Flat Design】 - The simple open-top design allows for quick and easy insertion and removal of components. Their flat structure facilitates neat stacking and efficient space-saving storage in workshops, labs, or drawers
  • 【Quick Content Identification & Durability】 - Made from durable materials, these bags resist tearing. Their design allows for basic content identification, aiding in inventory management and organization of various small parts
  • 【Ideal for Professionals & Hobbyists】 - An essential supply for electronics manufacturers, PCB assemblers, IT departments, repair technicians, and DIY enthusiasts working with motherboards, graphics cards, RAM modules, and other static-sensitive items

Full Specifications

Size75 Pcs 3 Sizes Zipper
BrandLJY
ColorTransparent
ShapeRectangular
MaterialPlastic
Unit Count75 Count
Closure TypeZipper
Model Number並行輸入品
CompatibilityPC
Material TypePlastic
Number of Sets75
Number of Items75
Special FeatureAnti-static, Foldable, Wireless Charging Compatible
Included ComponentsAnti-static bag
Manufacturer Part Number並行輸入品
Item Dimensions L x W x H7.9"L x 5.9"W x 0.2"H
Recommended Uses For ProductElectronic Device, Electronic Accessory
Manufacturer Warranty DescriptionAmazon Official FBA Warranty
Other Special Features of the ProductAnti-static, Foldable, Wireless Charging Compatible
Full listing titleLJY 75 Pcs ESD Anti Static Bags 3-Size Variety Pack, Zipper Shielding Bags for Motherboard, PCB, RAM, IC Chips & Electronic Components Antistatic Bag Pc Packing Kit(S/M/L)

Benchmark data for other processors

Ready to buy?

LJY 75 Pcs ESD Anti Static Bags 3-Size Variety Pack, Zipper Shielding Bags for Motherboard, PCB, RAM, IC Chips & Electronic Components Antistatic Bag Pc Packing Kit(S/M/L) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Motherboards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →