Skip to main content
TW-BNCJ-SMAP BNC Female to SMA Male Adapter, BNC Jack to SMA Plug Antenna Connector for Ham Radio Handhelds, 3 Pack
Anteenna

Anteenna TW-BNCJ-SMAP BNC Female to SMA Male Adapter

Bottom line: The Anteenna TW-BNCJ-SMAP BNC Female to SMA Male Adapter: BNC female to SMA male lets BNC antennas mount on SMA female handhelds; main trade-off: impedance rating is not stated in the listing.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ BNC female to SMA male lets BNC antennas mount on SMA female handhelds
  • ✓ Listed for ham handheld use on the 144MHz and 440MHz bands
  • ✓ Compact 13 x 17 mm body adds little height above the radio
  • ✓ 3-pack covers several radios or keeps a spare in the go-bag
  • ✓ Black finish blends with most handheld radio housings

Cons

  • ✗ Impedance rating is not stated in the listing
  • ✗ No contact plating or body material specified
  • ✗ Wrong gender for radios with an SMA male or RP-SMA antenna port
  • ✗ A heavy BNC antenna adds leverage on the radio's small SMA jack

Manufacturer description

The Anteenna TW-BNCJ-SMAP adapter lets you mount a BNC male antenna on a handheld radio with an SMA female port. One end is a BNC female jack and the other is an SMA male plug. Anteenna lists it as suitable for ham handheld antennas on the 144MHz and 440MHz bands, which makes it a quick fix if you own BNC whip or rubber-duck antennas and a newer SMA-equipped handheld. Each adapter measures 13 x 17 mm, so it adds very little height between the radio and the antenna. The black finish matches most handheld radio bodies. You get 3 pieces, enough to equip several radios or keep a spare in your…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Anteenna TW-BNCJ-SMAP BNC Female to SMA Male Adapter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "BNC female to SMA male lets BNC antennas mount on SMA female handhelds"; the main trade-off is "Impedance rating is not stated in the listing". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Which side goes on the radio and which on the antenna?

The SMA male plug threads onto the radio's SMA female port. Your antenna's BNC male connector then locks into the adapter's BNC female jack.

Will this work with my 2m/70cm handheld?

Anteenna lists it as suitable for ham handheld antennas on 144MHz and 440MHz, as long as your radio has an SMA female port and your antenna has a BNC male connector.

How big is the adapter?

Each adapter measures 13 x 17 mm, so it adds only a short section between the radio and the antenna.

How many adapters come in the pack?

The pack contains 3 identical BNC female to SMA male adapters, all black.

Does it fit reverse-polarity SMA (RP-SMA) radios?

The listing only says standard SMA male (SMAP). RP-SMA isn't mentioned, so confirm your radio's port type before you order.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • *It is suitable for Ham (144/440MHz) Handheld antenna BNC Male Connector
  • * Size: Small Size; 13 x17 mm
  • * black color
  • *Q'TY: 3 Pcs
  • *Adaptor Connector: BNCJ To SMAP (BNC Female To SMA Male )

Full Specifications

BrandAnteenna
ColorBlack
ModelTW-BNCJ-SMAP
Frequency144 MHz
Cable TypeAUX
Item ShapeRound
Model NameTW-BNCJ-SMAP
Unit Count3 Count
Item Length17 millimeters
Part Number4351102008
Connector TypeBNC
Number of Pins2
Outer MaterialOther
Maximum Voltage1 volts
Number of Items3
Special FeatureLightweight
Connector GenderMale-to-Female
Compatible DevicesHam (144/440MHz) Handheld antenna, Devices with SMA male connector
Indoor Outdoor UsageIndoor, Outdoor
Customer Package TypeRigid box or coiled in protective tubing
Full listing titleTW-BNCJ-SMAP BNC Female to SMA Male Adapter, BNC Jack to SMA Plug Antenna Connector for Ham Radio Handhelds, 3 Pack

Ready to buy?

TW-BNCJ-SMAP BNC Female to SMA Male Adapter, BNC Jack to SMA Plug Antenna Connector for Ham Radio Handhelds, 3 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro CRT & Display Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →