uxcell ARGB Splitter Cable Female to Female 3 Pin Extension Connector Cord Wire
Bottom line: The uxcell ARGB Splitter Cable Female to Female 3 Pin Extension Connector: Pre-soldered 3-pin female connectors plug straight into ARGB strips, no soldering; main trade-off: 3-pin 5V only, so it will not work with 4-pin 12V non-addressable RGB gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Pre-soldered 3-pin female connectors plug straight into ARGB strips, no soldering
- ✓ 1M / 3.3ft run lets you mount strips away from the IR/RF controller
- ✓ 5V addressable spec matches 5050 and 3528 ARGB strips and ARGB case fans
- ✓ Female-to-female ends also chain two strips together across separate locations
Cons
- ✗ 3-pin 5V only, so it will not work with 4-pin 12V non-addressable RGB gear
- ✗ Single female-to-female run, not a true multi-port splitter despite the name
- ✗ Fixed 1M length with no shorter or longer options in this listing
- ✗ Both ends female, so connecting two male headers needs a different adapter
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for uxcell ARGB Splitter Cable Female to Female 3 Pin Extension…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Pre-soldered 3-pin female connectors plug straight into ARGB strips, no soldering"; the main trade-off is "3-pin 5V only, so it will not work with 4-pin 12V non-addressable RGB gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Addressable RGB - ARGB Splitter Extension Cable, for 5050/3528 RGB LED strip lights or RGB fans.
- Type: 1 Female to 1 Female; Pins: 3; Voltage: 5V; Cable Length: 1M / 3.3ft..
- For your addressable RGB lighting needs. With pre-soldered female connectors, you can directly plug this cable into your RGB LED strips or IR/RF controller to get them connected, solderless and convenient.
- Function 1: Connect between IR/RF Controller and 5050/3528 RGB LED strips, to extend your LED strips to the location where you'd like to install.
- Function 2: Connect between RGB LED strips, making it possible to install your multiple RGB LED strips in your preferred locations.
Full Specifications
| Type | 1 Female to 1 Female; Pins: 3; Voltage: 5V; Cable Length: 1M / 3.3ft.. |
|---|---|
| Brand | uxcell |
| Color | Default |
| Function 1 | Connect between IR/RF Controller and 5050/3528 RGB LED strips, to extend your LED strips to the location where you'd like to install. |
| Function 2 | Connect between RGB LED strips, making it possible to install your multiple RGB LED strips in your preferred locations. |
| Unit Count | 1 Count |
| Item Length | 1 meters |
| Model Number | a19021400ux0323 |
| Mfr Part Number | a19021400ux0323 |
| Connector Gender | Female-to-Female |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Full listing title | uxcell ARGB Splitter Cable Female to Female 3 Pin Extension Connector Cord Wire for 5050 3528 LED Light Strips 1M Length |
Ready to buy?
uxcell ARGB Splitter Cable Female to Female 3 Pin Extension Connector Cord Wire for 5050 3528 LED Light Strips 1M Length is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 7 5700X + RTX 3060 12GB: The Best Value 1080p Combo in 2026
- Best Budget Streaming & Podcast Gear in 2026
- Nous Hermes Desktop: A Local AI Agent for Your Own Hardware
- Local LLM Benchmarks 2025: AMD Instinct vs Radeon Pro
- Old RAM Identification: Decode Part Numbers & Specs
- Why Retro Cables Are Melting Into Their Cases in Storage
- What We Lost When LAN Parties Died: A 2026 Editorial
- ComfyUI on an RTX 3060 12GB: What Image Models Actually Run Well
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- Raspberry Pi vs AMD GPUs for Local LLMs: What the Specs Show
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Logitech G29 vs HORI Force Feedback Wheel for Sim-Racing Beginners
- Can the RTX 3060 12GB Run Qwen3-27B Locally in 2026?
- Is the RTX 3060 12GB Still Worth It for 1440p Gaming in 2026?
- Anthropic's Samsung Chip Talks: Why Local Inference on an RTX 3060 Still Matters
- Is the Ryzen 7 7800X3D Worth It in 2026?
- Mistral Robostral Navigate: An 8B Model Steers Robots From One Camera
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- Build a Raspberry Pi 4 8GB RetroPie Emulation Station in 2026
- Running Local LLMs on a Raspberry Pi 5 in 2026: What Works, What Doesn't
- Best Streaming Gear for Twitch Beginners in 2026
- Benchmarking Open Models on Custom Tooling: Is It Agentic Enough?
- What Rig Runs an AI Agent Locally? Building for the Agent Era
- Can a Raspberry Pi 4 Run the Oomwoo Open-Source Robot Vacuum Brain?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090