Skip to main content
BTF-LIGHTING WS2811 DC24V 32FT Addressable RGB LED Strip 600LEDs 100Pixels Dream Color Black PCB IP30 Non-Waterproof Works with Arduino/Respberry/etc Prevent Voltage Droping(No Adapter or Controller)
BTF-LIGHTING

BTF-LIGHTING WS2811 DC24V 32FT Addressable RGB LED Strip 600LEDs 100Pixels Dream Color Black PCB IP30 Non-Waterproof Works with Arduino/Respberry/etc Prevent Voltage Droping(No Adapter or Controller)

Bottom line: The BTF-LIGHTING WS2811 DC24V 32FT Addressable RGB LED Strip 600LEDs ($29.74 on Amazon as of 2026-10-06): 10m continuous run at 24V - no power injection needed even at full white across all 600 LEDs; main trade-off: no power adapter or controller in the box - both are separate purchases.

$29.74

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 10m continuous run at 24V - no power injection needed even at full white across all 600 LEDs
  • ✓ 600 LEDs in 100 addressable pixels; one WS2811 IC drives each group of 6
  • ✓ Works with WLED, K-1000C, Raspberry Pi, Arduino UNO R3, ESP8266 and ESP32
  • ✓ 5050 SMD diodes with 256 brightness levels and 24-bit color output
  • ✓ 3-pin JST-SM connectors on both ends plus adhesive tape and fixed clips included

Cons

  • ✗ No power adapter or controller in the box - both are separate purchases
  • ✗ IP30 rating means indoor use only, no moisture or outdoor exposure
  • ✗ Groups of 6 LEDs, not per-LED control - limits fine-grained pixel effects
  • ✗ Cut points only fall on group lines, and re-joining sections requires soldering

SpecPicks Verdict

SpecPicks scored BTF-LIGHTING WS2811 DC24V 32FT Addressable RGB LED Strip 600LEDs… using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 【WS2811 Addressable RGB LED Strip】Addressable groups of 6 LEDs.One WS2811 IC drive six LEDs .Dream full color Programmable LED Strip.5050SMD .256 brightness display and 24-bit color display.
  • 【10m Continuous Length】It is designed with 24V DC input and 10m continuous length. Even if all the 600LEDs are turned on full white. You don’t need to inject power on the other ends. Perfect for large lighting project such as city skyline lighting,building outline decoration, hotel, KTV, bars, etc.
  • 【Amazing Dynamic Color Effects】When attached to compatible controllers (not included), it can display thousands of cool dynamic color effects, such as rainbow, wave, breathing, strobing, gradual change, color cycle, comet, fading, chasing, etc. If your controller can be programmed, it can show nearly unlimited combination of colors and gradients.
  • 【Wide Compatibility】 Compatible with WLED, K-1000C, Rasp Pi, UNO R3, ESP8266, ESP32 etc Programmable Controllers. It can use controller like RB3+SP630E, SP611E, SP608E, SP602E SP803E etc , And SP530E, DR03W, WT-SPI, SP511E etc smart music controllers. Power adapter and controller need to be purchased separately.
  • 【User-friendly Design】 Designed with 3pin JST-SM connectors on both ends for hooking up. Separated power/ground wires on both ends for injecting power. Each group can be cut and welded freely along the cutting line to meet different length requirements. Strong adhesive tape on the back make it easy to install. Fixed clips are also provided. Fixed clips can prevent the LED strip from falling off.

Full Specifications

BrandBTF-LIGHTING
ColorBlack Pcb
StyleModern
ThemeChristmas
Voltage5 volts_of_direct_current
Wattage180 watts
OccasionChristmas
Unit Count1 Count
Form FactorStrip Lights
Item Length10 meters
Light ColorRGB
Model NumberDC24VWS281110M60LB30
Power SourceDC24V6A
Material TypePCB
Product StyleModern
Control MethodRemote
Controller TypeIFTTT, Voice Control
Item Dimensions7.87 x 7.87 x 0.79 inches
Number of Items600
Special Feature32ft 10meters, 600LED 100Pixels, Addressable, Dimmable, No voltage drop

Ready to buy?

BTF-LIGHTING WS2811 DC24V 32FT Addressable RGB LED Strip 600LEDs 100Pixels Dream Color Black PCB IP30 Non-Waterproof Works with Arduino/Respberry/etc Prevent Voltage Droping(No Adapter or Controller) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $29.74

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →