EZDIY-FAB
EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote
Bottom line: The EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote: Tri-aperture design lights both inner and outer fan frame; main trade-off: hub X caps at 6 fans and 5A total current.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Tri-aperture design lights both inner and outer fan frame
- ✓ Works without ARGB motherboard support via bundled Hub X
- ✓ Remote adjusts color, brightness, effect, and fan speed
Cons
- ✗ Hub X caps at 6 fans and 5A total current
- ✗ Motherboard sync needs a 3-pin 5V ARGB header, not 4-pin 12V
- ✗ Airflow CFM, static pressure, and RPM range not published
- ✗ Self-lubricated sleeve-style bearing, not a fluid or ball bearing
Manufacturer description
The EZDIY-FAB Moonlight 120mm ARGB case fan ships as a 3-pack with the Fan Hub X and a 21-key remote, so you can light up a full build and control it without diving into BIOS. The tri-aperture design throws light from both the inside and outside of the frame, giving you a layered glow rather than the flat ring most budget RGB fans produce. If your motherboard has a 3-pin 5V ARGB header (5V, Di, -, G), the Moonlight syncs straight into Aura Sync and equivalent vendor software; if it doesn't, the bundled Hub X and remote handle color, brightness, effect, and fan speed on their own. Each fan…
SpecPicks Verdict
SpecPicks scored EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. EZDIY-FAB's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these fans work with my motherboard's RGB software?
Yes, if your board has a 3-pin 5V ARGB header (5V, Di, -, G). They support Aura Sync and equivalent vendor sync. A 4-pin 12V RGB header is not compatible.
How many fans can the Fan Hub X control?
Hub X supports up to 6 fans with a maximum current of 5A. This 3-pack uses half that capacity, leaving room for a second set.
Can I use them if my motherboard has no ARGB header?
Yes. The included Fan Hub X and 21-key remote control lighting effects, colors, brightness, and fan speed independently of the motherboard.
Are these fans loud?
EZDIY-FAB fits 8 anti-vibration rubber pads and a self-lubricated bearing with a friction-reducing substance to cut operating noise. Exact dBA ratings are not listed, so check the product listing.
What do buyers rate this 3-pack?
It is one of the better-reviewed budget ARGB fan kits in the 120mm class.
Key Features
- Astonishing Tri-aperture luminous light effect both inside and outside, Providing an impactful visual light effect.
- Sync RGB lighting via motherboard: Support M/B 3 pin RGB Header (5V, Di, -, G).
- With the EZDIY-FAB Fan Hub X and 21-key remote -You can instantly adjust the LED back-light effects, colors, brightness and Fan speed. NOTE：Maximum Current-5A, HUB-X ONLY Supports 6 Fans.
- Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reduces noise and improving efficiency.
- The Self-lubricated Bearing and friction-reducing substance Included in these fans lowers the fan noise while operating and enhance thermal efficiency
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Model | US-rgb slim fan with hub X-3P |
| Voltage | 12 volts |
| Wattage | 25 watts |
| Material | Rubber |
| Unit Count | 3 Count |
| Noise Level | 23.2 db |
| Part Number | US-rgb slim fan with hub X-3P |
| Compatibility | PC |
| Material Type | Rubber |
| Cooling Method | Air |
| Number of Items | 3 |
| Number of Packs | 3 |
| Vibration/Rumble | Yes |
| Air Flow Capacity | 26.16 cfm |
| Compatible Devices | Desktop |
| Power Connector Type | 3-Pin |
| Maximum Rotational Speed | 1300 rpm |
| Sync RGB lighting via motherboard | Support M/B 3 pin RGB Header (5V, Di, -, G). |
| Full listing title | EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control,ARGB Fan for PC Case-3 Pack |
Ready to buy?
EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control,ARGB Fan for PC Case-3 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- 8BitDo Pro 2 vs DualSense for PC Emulation: Which Controller Wins
- Abit BP6 Dual Celeron 366 Build Guide: The Legendary $200 SMP Workstation in 2026
- Raspberry Pi LLM Cluster: What It Can (and Can't) Do
- Boot Windows 98 from CompactFlash: A Silent, Reliable CF-to-IDE Build
- Hidden Code in Claude Code Flagged Chinese Users: What It Means for Local-LLM Privacy
- RX 9060 XT vs RX 9070 XT: OLED 1440p or 4K IPS?
- Lenovo G02 Retro Handheld Reportedly Ships With Pirated Game Library
- Best Mouse and Mousepad for FPS Aim Training in 2026
- Best CPU for Local LLM Inference in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Qwen3.6-27B at 72 Tok/s on RTX 3090: What's Real
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
- CompactFlash as an IDE Boot Drive: The Definitive Win98 Storage Guide
- GPT-5.6 Sol Ships Under Government Access OpenAI Calls Unsustainable
- Adafruit's Cyberdeck Raspberry Pi Music Workstation Guide Lands
- Ryzen 5 5600G APU for Local LLM Inference in 2026: What You Can Actually Run
- Forza Horizon 6: 8GB vs 16GB VRAM GPU Benchmark Guide
- Offline Suitcase Robot: Jetson Orin NX SUPER + Gemma 4 E4B
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5080
- Logitech G29 vs HORI Force Feedback Wheel: Which Entry Sim Racing Wheel Wins?
- Can the Ryzen 5 5600G Game at 1080p Without a Graphics Card in 2026?
- Best CPU for Gaming in 2026: Intel vs AMD Showdown
- Did the Steam Deck Get a New Box Design? What Changed
- Best SSD for Local LLM Model Storage in 2026: NVMe vs SATA
- GameSir G7 SE vs 8BitDo Pro 2 for PC Gaming: Wired Precision vs Wireless Flexibility
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090