Geekworm
Geekworm 11mm Thickness Embedded Heatsink (P165-B) for Raspberry Pi 4
Bottom line: The Geekworm 11mm Thickness Embedded Heatsink for Raspberry Pi 4 ($7.50 on Amazon as of 2026-10-22 10:29 UTC): 11mm aluminum block covers CPU, RAM and other Pi 4 chips at a 0mm theoretical gap; main trade-off: thermal grease is required for real contact and is not included in the box.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-22. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 11mm aluminum block covers CPU, RAM and other Pi 4 chips at a 0mm theoretical gap
- ✓ Fits every Raspberry Pi 4 Model B variant: 1GB, 2GB, 4GB and 8GB
- ✓ Cutout reserves the Pi 4 PoE header so PoE HAT wiring still connects
- ✓ Accepts an optional 30mm 3010 or 3007 fan when passive cooling runs short
Cons
- ✗ Thermal grease is required for real contact and is not included in the box
- ✗ Only 4 M2.5x5+5mm spacers ship with it; other HATs need standoffs you buy separately
- ✗ 11mm stack height blocks slim cases and low-clearance enclosures
- ✗ Raspberry Pi 4 only, so it will not carry over to a Pi 5 upgrade
Manufacturer description
About this item Compatibility: Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, embedded heatsink with 11mm thickness; Model: P165-B Supports to cooling down the Raspberry Pi 4 board with Pi 4 expansion board(reserve the PoE port of Pi 4); Compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board Recommend to use CPU thermal conductive grease: The theoretical value of the gap between the heatsink protrusions and the CPU, RAM and other chips of Pi…
SpecPicks Verdict
SpecPicks scored Geekworm 11mm Thickness Embedded Heatsink for Raspberry Pi 4 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Geekworm's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, embedded heatsink with 11mm thickness; Model P165-B
- Supports to cooling down the Raspberry Pi 4 board with Pi 4 expansion board(reserve the PoE port of Pi 4); Compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board
- Recommend to use CPU thermal conductive grease The theoretical value of the gap between the heatsink protrusions and the CPU, RAM and other chips of Pi 4 is 0mm; Strongly recommend to use CPU grease to get better heat dissipation
- Only equipped with 4pcs M2.5x5+5 mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards
- Supports the installation of 30mm fan(3010 or 3007 fan); Cooling fan can be added when the heat dissipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat dissipation problems can be solved
Full Specifications
| ASIN | B08N5VZN8R |
|---|---|
| Brand | Geekworm |
| Brand Name | Geekworm |
| CPU Socket | Broadcom BCM2711 |
| Item Weight | 1.2 Ounces |
| Manufacturer | Geekworm |
| Mounting Type | PCB Mount |
| Product Dimensions | 2.55"L x 2.16"W x 0.43"H |
| Warranty Description | 3 months |
| Cooler Heatsink Material | Aluminum |
| Item Dimensions L x W x H | 2.55"L x 2.16"W x 0.43"H |
| Cooler Heatsink Compatibility | for Raspberry Pi 4 |
| Full listing title | Geekworm 11mm Thickness Embedded Heatsink (P165-B) for Raspberry Pi 4, Armor Aluminum Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension |
Ready to buy?
Geekworm 11mm Thickness Embedded Heatsink (P165-B) for Raspberry Pi 4, Armor Aluminum Radiator Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board Support POE Extension is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-22. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Monitor for Color Grading Under $500 in 2026
- Ryzen 7 5800X + RTX 5060 Combo Hits $439 With Cooler
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
- CompactFlash as a Boot Drive: Silent Storage for a Period-Correct Retro PC (2026)
- VibeThinker-3B on an RTX 3060 12GB: Reasoning in 3 Billion Params
- Best Gaming Monitor for Console + PC in 2026
- Jellyfin on a Raspberry Pi 4 8GB in 2026: The 4K Transcode Reality Check
- Asus ROG Harpe II Extreme Brings a 65K-DPI Sensor — and a Gold Price Tag
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- HyperX QuadCast 2 S vs Blue Yeti for Streaming in 2026
- Build a Couch Emulation Station: Raspberry Pi 4 + 8BitDo SN30 Pro
- Retro Game Emulator Download 2026: Best Picks for AMD PCs
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- Best Streaming Gear for New Content Creators in 2026
- Acer Nitro 65 Review: Solid Gaming, Connectivity Caveats
- CompactFlash as an IDE Drive: Silent, Period-Correct Storage for Win98 Rigs
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- How to run DeepSeek-R1 32B on Arc B580
- Best Controller for Steam Deck Docked Mode in 2026
- Building a Period-Correct 2001 Win98 Rig With Parts You Can Still Buy
- Ryzen AI Max+ 395 Specs: Full Breakdown and Comparison
- Nemotron 3 Ultra vs MiniMax M3: Best Open Model for a 12GB Rig
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090