Mini, Compact 40mm x 20mm USB Fan, for VR Gear, Aquarium, Roku, Router, Raspberry Pi, Cosplay, Helmet Cooling Ventilation
Bottom line: The Mini, Compact 40mm x 20mm USB Fan, for VR Gear, Aquarium, Roku,: Compact 40x20mm footprint fits Raspberry Pi cases, routers, and tight DIY enclosures; main trade-off: 5V USB only, so it cannot run off a case fan header.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Compact 40x20mm footprint fits Raspberry Pi cases, routers, and tight DIY enclosures
- ✓ 3-speed inline control lets you trade airflow for quieter operation
- ✓ Dual-ball bearings rated for 65,000 hours of runtime
- ✓ Metal front grill shields fingers and keeps the cable out of the blades
- ✓ 100cm/3.3ft USB cable reaches most 5V ports without an extension
Cons
- ✗ 5V USB only, so it cannot run off a case fan header
- ✗ 40mm frame moves limited air for anything larger than small electronics
- ✗ Amazon listing warns to confirm dimensions from photos, so fitment errors are common
- ✗ No stated noise rating or CFM figure to compare against other 40mm fans
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Mini, Compact 40mm x 20mm USB Fan, for VR Gear, Aquarium, Roku…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Compact 40x20mm footprint fits Raspberry Pi cases, routers, and tight DIY enclosures"; the main trade-off is "5V USB only, so it cannot run off a case fan header". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- SCCCF 40mm USB Fan with 3 Speed Control USB Ventilator 5V Cooling Fan Compatible for phone flat VR Gear, Aquarium, Roku, Router, Raspberry Pi, Cosplay, Helmet Receiver DVR Playstation Xbox Computer Cabinet Cooling
- Mini Cooling Fan: SCCCF 40mm mini USB cooling fan with 3-speed control, size and super lightweight design, perfect fit for DIY cooling and narrow place.
- High Quality: Metal grill on front side, protect cable and your hands; High quality bearings, durable; 100cm/3.3ft USB cable , meet connection needs.Please confirm the size by pics before purchasing
- Long Life:Dual-ball bearings have a lifespan of 65,000 hours and allows the fans to be laid flat or stand upright.
- Widely Used: Suitable for ventilation of VR glasses /TV box /Raspberry pie /Router /Small PC Case and other small electronic equipment ventilation
Full Specifications
| Brand | SCCCF |
|---|---|
| Model | 4010-1 |
| Voltage | 5 Volts |
| Wattage | 2.5 watts |
| Material | Plastic |
| Long Life | Dual-ball bearings have a lifespan of 65,000 hours and allows the fans to be laid flat or stand upright. |
| Unit Count | 1.0 Count |
| Noise Level | 31.3 Decibels |
| Part Number | 4010-1 |
| Widely Used | Suitable for ventilation of VR glasses /TV box /Raspberry pie /Router /Small PC Case and other small electronic equipment ventilation |
| Connectivity | USB |
| Compatibility | PC, Xbox |
| Material Type | Plastic |
| Cooling Method | Air |
| Mini Cooling Fan | SCCCF 40mm mini USB cooling fan with 3-speed control, size and super lightweight design, perfect fit for DIY cooling and narrow place. |
| Air Flow Capacity | 8.71 Cubic Feet Per Minute |
| Compatible Devices | Amplifier, Gaming Console, Refrigerator, Router, Switch |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 10000 RPM |
| Item Dimensions L x W x H | 1.57"L x 1.57"W x 0.79"H |
Benchmark data for other processors
Ready to buy?
Mini, Compact 40mm x 20mm USB Fan, for VR Gear, Aquarium, Roku, Router, Raspberry Pi, Cosplay, Helmet Cooling Ventilation is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- GitHub Copilot vs Claude Code vs OpenCode Benchmark 2026
- GLM-5.2 Local: What GPU Actually Runs the Top Open-Weights LLM
- Blue Yeti vs HyperX QuadCast 2 S: Which USB Mic Wins for Streaming in 2026?
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- RTX 5080 vs RTX 4080 SUPER — one generation apart
- Best Budget Ryzen Gaming PC Build for 1080p in 2026
- ComfyUI on a 12GB RTX 3060: SDXL and Flux Image Gen Benchmarked
- pxpipe Cuts Claude Code Token Costs Up to 70%: How It Works, When to Go Local
- 48GB DDR5 or 12GB VRAM? What Actually Speeds Up Local LLMs
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- How to run Llama 3.1 70B on Apple M4 Max
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- AMD Ryzen AI Max+ 395 vs Mac Studio M4 Max for Local LLM Inference
- Which GPU for Which Model: A Per-LLM VRAM Picker for Local Rigs (2026)
- Best Controller for Steam Deck and PC in 2026: 8BitDo vs GameSir vs DualSense
- The Greatest GPU Awards: A Decade of Standout Cards
- New Raspberry Pi 5 Active-Cooler + NVMe VESA Case Lands (3D-Printable)
- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Best Budget SSDs for Gaming PC Builds in 2026
- Best Storage for a Retro PC Build in 2026
- Best Retro PC Storage Adapters in 2026: IDE, SATA & CompactFlash Picks
- Best Budget NVMe SSD for a Big Steam Library: WD Blue SN550 vs SATA
- GLM-5.2 vs Frontier Models on GDPval-AA: What It Means for Local Builders
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090