Thermalright
Thermalright HR10 2280 PRO SSD Heatsink Cooler
Bottom line: The Thermalright HR10 2280 PRO SSD Heatsink Cooler is a specs-and-price decision rather than a crowd-consensus one in the ssds & storage category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Thermalright's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Thermalright HR10 2280 PRO SSD Heatsink Cooler using a rating × review-volume × price-fit model applied to published specs and reviews across the ssds & storage category. Thermalright's ssds & storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【The most powerful auxiliary】Customized compact (30mm×30×10mm) size PWM fan, the speed can reach 3500-6000RPM, high speed can quickly take away the temperature, it has a 50CM long cable, a plug and play, the interface is 4PIN PWM
- 【Double-sided cooling】High thermal conductivity pads on the top and bottom sides, with a thermal conductivity of 14.8W/MK, excellent thermal conductivity, with stainless steel laminated lower cover, can greatly increase the cooling area of the SSD cooler, with a cooling effect of 10°C-30°C (depending on the environment), cooling the 2280 SSD to a safe temperature, to avoid overheating and throttling
- 【Specification】SSD cooling size: 90.3mm(L) x 23.7mm(W) x 43.8mm(H), material: stainless steel + aluminum fins, weight: 95g, number of heat pipes: 4*5mm heat pipes; fan size: 30 x 30 x 10mm, fan speed: 3500/6500RPM±10%, voltage: DC 12V, current: 0.05 A, fan interface: 4PIN PWM
- 【Compatibility】HR10 2280 PRO is suitable for M.2 interface 22 x 80mm SSD cooling, support single-sided and double-sided particle 2280 SSD, (Note: does not support ITX motherboard back-mounted M.2 interface), the unique design of the top makes the overall value higher
Full Specifications
| Brand | Thermalright |
|---|---|
| Model | HR10 2280 PRO D6 |
| Weight | 95g |
| Dimensions | 30 x 30 x 10mm |
| Unit Count | 1 Count |
| Part Number | HR10 2280 PRO D6 |
| Mounting Type | Chassis Mount |
| Number of Items | 1 |
| Number of Packs | 1 |
| Included Components | SSD heatsink |
| Cooler Heatsink Material | Aluminum |
| Item Dimensions L x W x H | 3.56"L x 0.93"W x 1.72"H |
| Cooler Heatsink Compatibility | M.2 2280 SSDs |
| Full listing title | Thermalright HR10 2280 PRO SSD Heatsink Cooler,Double-Sided Heat Sink,with 4×5mm Heatpipes AGHP Tochnology, with Thermal Silicone Pad for M.2 2280 SSD Cooling,Computer High Performance 2280 SSD Coole |
Ready to buy?
Thermalright HR10 2280 PRO SSD Heatsink Cooler,Double-Sided Heat Sink,with 4×5mm Heatpipes AGHP Tochnology, with Thermal Silicone Pad for M.2 2280 SSD Cooling,Computer High Performance 2280 SSD Coole is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Etched's Transformer-Only Inference Chip vs Your GPU: What Changes for Local Builders
- AI Technologies We'll Realistically See in Our Lifetimes
- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- Raspberry Pi 5 Projects Worth Building in 2026
- Laguna XS.2 Lands in llama.cpp: What the Tiny Hybrid Model Means for Local Inference
- First-Time Steam Deck Emulation Setup: A Complete Guide
- DIY NVIDIA 3D Vision Emitter: Building One with an RP2040
- Gemini 3.6 Flash Shipped: Why Local Builders Still Reach for a 12GB GPU
- CUDA 13.3 Landed: What Local LLM Operators Need to Know for RTX 3060 / 4090 Rigs
- Raspberry Pi 5 IOMMU Support Is Landing in the Mainline Linux Kernel
- Intel Arc LLM Performance: A770, B580 & Pro B60 Guide 2025
- RTX 4090 AI Server vs AMD Instinct: 2025 Guide
- Build a Raspberry Pi Carputer for Your Daily Driver (2026)
- Best Storage Upgrades for Gaming and Retro PCs in 2026
- vLLM vs llama.cpp for Single-User Local Chat on a 12GB GPU
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- LattePanda Sigma Review (2026): The x86 SBC That Breaks the Pi Pattern
- Best Wireless Controller for PC Gaming in 2026
- Best Budget PC Gaming Peripherals in 2026: 5 Picks That Punch Above Their Price
- Best Sim Racing Wheel for Forza on Xbox + PC 2026
- Best 4K Monitor for Console Gaming on a PS4 Pro in 2026
- GeForce4 Ti 4600 tuning guide — ForceWare, Detonator, and XP/98 driver pairing
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090