Apevia
Apevia Inspire-PK Inspire Mid Tower ATX Gaming PC Case w/ 4X 120mm ARGB Fans
Bottom line: The Apevia Inspire-PK Inspire Mid Tower ATX Gaming PC Case ($79.99 on Amazon as of 2026-10-06): Fits GPUs up to 360mm long and CPU air coolers up to 165mm tall; main trade-off: ARGB sync needs a 3-pin ARGB motherboard header; other boards use the top button.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Fits GPUs up to 360mm long and CPU air coolers up to 165mm tall
- ✓ Four 120mm ARGB fans pre-installed, with 366 lighting modes from a top button
- ✓ Front radiator support up to 360mm, plus a 120mm rear radiator mount
- ✓ Metal mesh front panel plus 134 side vents for high airflow
- ✓ Magnetic swing-open glass door, screw-in PCIe slots, washable top dust filter
Cons
- ✗ ARGB sync needs a 3-pin ARGB motherboard header; other boards use the top button
- ✗ Storage limited to 2x 2.5-inch and 2x 3.5-inch drive mounts
- ✗ Front I/O is 2x USB 3.0 plus HD audio; no USB-C port listed
- ✗ No top radiator mount listed; rear tops out at a single 120mm
SpecPicks Verdict
SpecPicks scored Apevia Inspire-PK Inspire Mid Tower ATX Gaming PC Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Apevia's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Performance gaming mid tower with left-side tempered glass door swivel open style magnetic side panel & metal mesh high airflow front panel with 134 total vents on the sides. Plenty of room on the back side to hide and route cables. Matching paint colors from both the exterior/interior of the case & case fans.
- 4x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode)
- Can fit graphics cards up to 360mm in length and CPU coolers up to 165mm in height. Top panel comes with 2 x USB 3.0 & HD Audio jacks. Front panel water cooling options: 120mm, 240mm, 280mm, 360mm / Rear panel water cooling options: 120mm
- Screw in PCI-E Slots (Non-punch out PCI-E Slots) for hassle free GPU installation. Room for up to 2 x 2.5" hard drives and 2 x 3.5" hard drives
- Magnetic Dust Filter on the top panel for reducing dust falling into case. Easy to remove dust filter to wash/clean
Full Specifications
| Brand | Apevia |
|---|---|
| Color | Pink |
| Fan Size | 120 Millimeters |
| Material | Tempered Glass |
| Case Type | Mid Tower |
| Model Name | INSPIRE-PK |
| Light Color | RGB |
| Connectivity | USB |
| Model Number | INSPIRE-PK |
| Compatibility | PC, Switch |
| Cooling Method | Air |
| Number of Fans | 4 |
| Mfr Part Number | INSPIRE-PK |
| Total Usb Ports | 2 |
| Antenna Location | Building a gaming PC, home office computer, or workstation |
| Compatible Devices | ARGB motherboards, graphics cards up to 360mm, CPU coolers up to 165mm |
| Enclosure Material | Tempered Glass |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 2 |
| Warranty Description | 1 Year Limited Warranty (Visit our website for full details) |
| Full listing title | Apevia Inspire-PK Inspire Mid Tower ATX Gaming PC Case w/ 4X 120mm ARGB Fans, 366 RGB Light Modes, 1x Metal Mesh Airflow Front Panel, 1x Door Swivel Style Magnetic Glass Side Panel, 2X USB3.0, Pink |
Ready to buy?
Apevia Inspire-PK Inspire Mid Tower ATX Gaming PC Case w/ 4X 120mm ARGB Fans, 366 RGB Light Modes, 1x Metal Mesh Airflow Front Panel, 1x Door Swivel Style Magnetic Glass Side Panel, 2X USB3.0, Pink is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 5 IOMMU Driver Heads to the Mainline Linux Kernel
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming: Which Wins?
- Raspberry Pi 4 as an SMB1 File Server for Windows 98 Retro Rigs
- How to run Llama 3.1 8B on Arc B580
- Optimizing LTX-2.3 Inference Speed on an RTX 3080 Ti
- Steam Deck LCD Battery Swollen: Diagnosis & Safe Fix Guide
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 with a Free Cooler
- AMD EXPO Ultra-Low Latency BIOS Updates: 600-Series Guide
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a Secondary or Retro Build in 2026
- Best Storage Upgrades for Older Gaming PCs in 2026
- Building a 2001 LAN-Party Rig: Pentium III, GeForce 3, Win98 SE Period-Correct Build Log
- Build a Jellyfin Home Media Server on a Raspberry Pi 4 (8GB) in 2026
- Watching a Z80 Live From a Raspberry Pi RP2350
- Best Apartment Sim Racing Wheel Setup: Quiet and Clamp-On (2026)
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Stream Deck MK.2 vs 12-Button MMO Mouse vs Macro Keys: Which Shortcut Buttons Are Worth It
- Baidu Unlimited OCR Runs Locally: Document AI on an RTX 3060 12GB
- Best GPU for Local Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- Dump and Archive Your Retro PC's IDE Drives in 2026: A USB Adapter Workflow
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- Build a Raspberry Pi 4 8GB Starter Home Lab in 2026: BOM + First Services
- Best Mid-Range Gaming CPU (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090