BUJ Universal Racing Simulator Desk Mount
Bottom line: The BUJ Universal Racing Simulator Desk Mount ($48.99 on Amazon as of 2026-11-21 01:15 UTC): Mounts two shifters, two handbrakes, or one of each, even across Logitech/Thrustmaster/Fanatec; main trade-off: clamp-on design needs a desk edge, so it will not work with a dedicated rig profile.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Mounts two shifters, two handbrakes, or one of each, even across Logitech/Thrustmaster/Fanatec
- ✓ Height adjusts anywhere from 0 to 11.8 inches (300mm) to match your seating position
- ✓ Quick-release clamp fits desktops up to 5.9 inches (150mm) thick
- ✓ Extra 0.8-inch metal piece between clamp and body cuts flex versus thinner rivals
Cons
- ✗ Clamp-on design needs a desk edge, so it will not work with a dedicated rig profile
- ✗ Aluminum and metal build adds weight compared with plastic desk mounts
- ✗ Some assembly still required after unboxing, though the main body arrives built
- ✗ Silicone pad protects finish but a 5.9-inch clamp jaw may not clear thick desk aprons
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BUJ Universal Racing Simulator Desk Mount, so this read rests on the manufacturer's listed specs and the current price in the sim racing category (how we evaluate). Compare with similarly-priced alternatives in the sim racing category before committing. On the listing's own facts, the case for it is "Mounts two shifters, two handbrakes, or one of each, even across Logitech/Thrustmaster/Fanatec"; the main trade-off is "Clamp-on design needs a desk edge, so it will not work with a dedicated rig profile". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- WIDE RANGE OF ADAPTATION: Whether you want to install two Tss handbrakes/USB handbrake or two TH8A Shifter/ G Driving Force Shifter/Fana tec Shifter at the same time, or one Tss handbrakes and one TH8A Shifter/ G Driving Force Shifter/Fana tec Shifter. Even if they are from different brands, you can install them together.
- VERSATILE AND ERGONOMICALLY-DESIGNED: you can adjust the height of the controller freely between 0-11.8 Inch (300mm) according to actual needs. Don't worry about the small desktop space anymore, our desk mounting bracket can free up your desktop space to place other controllers. Enjoy your racing game to the fullest.
- HEAVY DUTY MATERIAL: New design racing sim shifter/handbrake desk mount is designed with heavy-duty aluminum and metal.The main part of the mount is already installed, and you can assemble the rest according to your preferences, and it only takes a few minutes to install. Different from other products on the market, we added a 0.8inch wide metal piece between the push-pull clamp and the main body to make the desk mount more stable.
- WIDE ADJUSTABLE RANGE: The adjustable quick-release clamp design allows our mounting bracket to be installed on table boards of different thicknesses, the thickest can reach 5.9 Inch (150mm). Thanks to the non-slip silicone pad and the high-quality plastic on top of the leveling feet, it provides strong holding power without damaging or scratching your desktop.
- QUICK-RELEASE CLAMP: Thanks to the design of the quick-release clamp, our mounting bracket can be quickly installed and removed. After adjustment, it only takes a few seconds to complete the installation/or removal steps when it is installed on the same desktop.
Full Specifications
| Brand | BUJ |
|---|---|
| Color | Gray |
| Connectivity | USB |
| Power Source | Corded Electric |
| Button Quantity | 1 |
| Controller Type | Handbrake |
| Hardware Platform | Universal |
| Compatible Devices | Logitech G Driving Force Shifter, Thrustmaster TH8A Fanatec ClubSport TSS Handbrake, USB Handbrake |
| Additional Features | Ergonomic |
| Connectivity Technology | USB |
| Full listing title | BUJ Universal Racing Simulator Desk Mount - Compatible with Logitech, Thrustmaster, Fanatec Shifters & Handbrakes, Plus USB Handbrake Models |
Ready to buy?
BUJ Universal Racing Simulator Desk Mount - Compatible with Logitech, Thrustmaster, Fanatec Shifters & Handbrakes, Plus USB Handbrake Models is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Sim Racing
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 500 Specs, Price & Real-World Use in 2026
- Best Budget Streaming Setup for Beginners in 2026
- Raspberry Pi 4/5 Wall Mount Case: 3D Printing Guide
- HyperX QuadCast 2 vs Blue Yeti for Streaming in an Untreated Room
- Best Budget Gaming CPU in 2026: 5 AM4 and Entry Picks Ranked
- Ryzen AI Max+ 395 (Strix Halo) Mini PC vs RTX 3060 12GB for Local LLMs
- Best $500-600 Gaming PC Build for a Ryzen/RX 6600 Rig
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K: Best 4K Monitor for Console & PC Gaming
- Debugging Vintage Windows with Claude: SYSFIX Patterns for Win98 vcache, MSNP32, and Glide Hangs
- AMD Ryzen 7 5800X3D Re-Review Shows DDR4 Still Has Gaming Legs in 2026
- Prime Day 2026: Logitech Gaming Mice Drop Up to 47% Off
- Rescue Your Retro PC's Data Before the IDE or SATA Drive Dies
- Intel Core Ultra 5 250K Plus vs Ryzen 5 7600X3D: The Mid-Range Faceoff
- USB-to-IDE Adapter vs CF-to-IDE for Imaging Retro PC Drives
- Best Game Streaming Starter Kit in 2026: Mic, Light, and Capture
- Best Controller for Emulation and Retro Gaming on PC (2026)
- Best GPU for Running Llama 70B Locally in 2026
- What Hardware Runs a Gemini-Class Model Locally in 2026?
- Llama 4 Scout: RTX 3060 12GB Expert Offload vs Ryzen 7 5800X CPU-Only (2026)
- Hobbyist Turns a Raspberry Pi and ADS-B Into a Viral Real-Time Airport Tracker
- Asus ROG Xreal R1: 240Hz AR gaming glasses land
- LongCat-2.0: A Frontier Model Trained Without Nvidia GPUs
- Samsung Odyssey 4K vs KOORUI QD-Mini LED: Best 4K Gaming Monitor?
- Raspberry Pi 5 16GB Ships — Is the Pi 4 8GB Still Worth It?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090