HAVN HS 420 VGPU Dual-Chamber Mid Tower ATX PC Case Black
Bottom line: The HAVN HS 420 VGPU Dual-Chamber Mid Tower ATX PC Case Black ($249.99 on Amazon as of 2026-11-22 13:49 UTC): Dual-chamber layout aims bottom intake straight at the centrally mounted GPU; main trade-off: dual-chamber depth and 420mm rad support demand serious desk clearance.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Dual-chamber layout aims bottom intake straight at the centrally mounted GPU
- ✓ PCIe 5.0 x16 riser and VGPU mount kit included, no separate purchase needed
- ✓ Room for eleven 140mm fans plus 420mm radiators on both top and right side
- ✓ Heat-formed UniSheet curved glass gives a low-distortion panoramic interior view
- ✓ Rubber-padded fan brackets isolate vibration from the chassis to cut resonance
Cons
- ✗ Dual-chamber depth and 420mm rad support demand serious desk clearance
- ✗ Filling eleven 140mm fan slots is a large extra cost on top of the case
- ✗ Vertical GPU orientation can crowd bottom intake fans with thick 3-slot cards
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for HAVN HS 420 VGPU Dual-Chamber Mid Tower ATX PC Case Black, so this read rests on the manufacturer's listed specs and the current price in the pc cases category (how we evaluate). Compare with similarly-priced alternatives in the pc cases category before committing. On the listing's own facts, the case for it is "Dual-chamber layout aims bottom intake straight at the centrally mounted GPU"; the main trade-off is "Dual-chamber depth and 420mm rad support demand serious desk clearance". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- HAVN Hybrid Structure for Optimal GPU Cooling: Dual-chamber design with balanced airflow and a traditional case size ratio, designed to direct cool air from the bottom intake onto the centrally positioned GPU.
- Carefully Guided Airflow: The angled bottom fan bracket with the well-placed, glass airflow guide keeps cool air on GPU intake.
- Lightning-Fast Riser Cable Included: The VGPU Mount Kit and PCI Express 5.0 X16 riser cable allow you to showcase your hardware without compromising on performance.
- Cooling Power and Compatibility: HS 420 VGPU fits a total of eleven 140mm fans while supporting up to 420mm radiators on its top and right side.
- Heat-Formed UniSheet Glass Panel for Panoramic View: We challenged the limits of production to engineer the smallest possible curve radius and minimize visual distortion, providing the user with a clear and continuous view of the inside of the case.
- Unique SimpliCable Routing System: Uniquely user-friendly SimpliCable routing system and fan hub. Top-to-bottom grooved guides cleanly route your cables for a pristine overall appearance.
Full Specifications
| Brand | HAVN |
|---|---|
| Color | Black |
| Material | Alloy Steel |
| Case Type | Mid Tower |
| Model Name | HS |
| Unit Count | 1 Count |
| Model Number | HVN-CA-HS420-08 |
| Compatibility | PC |
| Customization | Customizable space fits combinations of storage, fans, radiators, and portable displays (VESA display mount included). |
| Cooling Method | Air |
| Mfr Part Number | HVN-CA-HS420-08 |
| Number of Items | 1 |
| Number of Packs | 1 |
| Antenna Location | Gaming |
| Vibration/Rumble | Yes |
| Enclosure Material | Alloy Steel |
| Vibration Isolation | All of the fan brackets have flexible rubber pads to isolate the bracket from the chassis and avoid resonance build-up. |
| Warranty Description | Limited Warranty |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | ATX |
| Full listing title | HAVN HS 420 VGPU Dual-Chamber Mid Tower ATX PC Case Black | PCIe 5.0 Vertical GPU Kit, 11x 140mm Fan Slots & 2X 420mm Radiator Support, SimpliCable Cable Management, Tempered Glass, PWM Fan Hub |
Ready to buy?
HAVN HS 420 VGPU Dual-Chamber Mid Tower ATX PC Case Black | PCIe 5.0 Vertical GPU Kit, 11x 140mm Fan Slots & 2X 420mm Radiator Support, SimpliCable Cable Management, Tempered Glass, PWM Fan Hub is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Does Dual-Channel RAM Matter for Local LLM Inference?
- PCIe Gen2/Gen3 1:2 Analog MUX: Practical Maker Implementation
- Best 4K Gaming Monitor Under $500 in 2026
- GeForce 3 Ti 500 vs Radeon 8500: The 2001 DirectX 8 GPU Showdown
- Intel Arc AI Training in 2026: What Workloads Actually Work
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- CompactFlash as an IDE Boot Drive: The Definitive Win98 Storage Guide
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
- Best SSD for a Local AI / LLM Workstation in 2026
- Gemma 4 31B on a 24GB GPU: RTX 3090 vs RTX 4090 vs RX 7900 XTX Quant Table (2026)
- AMD Ryzen AI Max+ 395: The 128GB Mini PC Running 70B LLMs Locally
- Run Qwen 3.6 27B Locally: VRAM, Quant & tok/s on a 12GB RTX 3060
- Sega Genesis Mini vs SNES Classic: The Definitive 2026 Plug-and-Play Retro Showdown
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Grok 4.5, GPT-5.6, Kimi K3: four frontier models in eight days — what it means for local rigs
- Best Webcam for Streaming Under $200 (2026)
- Building a Period-Correct 1999 3dfx Voodoo3 Windows 98 PC in 2026
- Best Budget Gaming Setup Essentials for 2026: Mouse, Keyboard, Headset, Mic & Mousepad
- OpenAI Buys Ona: What Autonomous Codex Means for Local Coding Rigs
- Raspberry Pi 4/5 Wall Mount Case: 3D Printing Guide
- 9800X3D vs Core Ultra 9 285K — gaming vs productivity
- Cloning a Win98 Voodoo3 Boot Drive: SATA-IDE Adapter Workflow
- HiDream-O1 1.5 Lands #3 in Text-to-Image: Can You Run It Locally on a 12GB GPU?
- Is the RTX 5050 Really as Bad as Everyone Says?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090