Jonsbo
JONSBO N5 NAS Pc Case
Bottom line: The JONSBO N5 NAS Pc Case ($249.99 on Amazon as of 2026-10-06): 12x 3.5" hot-swap HDD bays plus 4x 2.5" SSD mounts in a 355x403x350mm shell; main trade-off: ATX PSUs over 170mm cut front drive capacity from 12 bays to 8.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 12x 3.5" hot-swap HDD bays plus 4x 2.5" SSD mounts in a 355x403x350mm shell
- ✓ North American black walnut veneer over steel and aluminum, 7.5kg total weight
- ✓ Fits E-ATX boards up to 330mm and holds up to 4 GPUs across 8 PCI slots
- ✓ Three 120mm fans preinstalled; mounts up to 11 more across front, sides, and rear
- ✓ Removable one-piece top cover and pull-out 4-bay HDD cage speed up drive swaps
Cons
- ✗ ATX PSUs over 170mm cut front drive capacity from 12 bays to 8
- ✗ CPU cooler ceiling of 160mm rules out most large dual-tower air coolers
- ✗ GPU clearance caps at 325-350mm, excluding the longest flagship cards
- ✗ AIO support tops out at 240/280mm radiators, no 360mm option
SpecPicks Verdict
SpecPicks scored JONSBO N5 NAS Pc Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Jonsbo's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- JONSBO N5 12+4 Drive bay NAS EATX Pc case, home server-NAS Network Storage/High Performance Computing Home/Office/Enterprise,Easier to build your PC + Personal/Home Server,More convenient 【Solid wood decoration】: North American black walnut venee.
- 【12+4 Drive Bay】: Supports 12x3.5 hotswap HDD disk front installation and 4x2.5 SSD which is Side installation. If full 12pcs HDD disk used,Pls have a note on the PSU condition，GPU HP Host: Supports 4 GPU in the case.Pls have a note on the AIO condition
- 【Convenient installation structure】 :With One-piece top cover removable/easy to install the removable 4-bay HDD cage
- 【Hard Drive 】2.5 "SSD*2 or 2.5 "SSD*4/3.5 "HDD*12 【Compatible MB】: ITX/M-ATX/ATX/E-ATX 【PSU support】 : ATX170mm-240mm ,ATX power supply ≤ 170mm (front can install 12 disk slots) ATX power supply ≥ 170mm (front can install 8 disk slots) 【CPU cooler support】 <160mm 【GPU support】 <325mm-350mm
- 【Cooling system】: Front 120mm*2 or 140mm*2 /Right 120mm*3/Rear 120mm*3 (Built-in)/Left 120mm*3 【AIO】 support : 240/280 【PCI expansion slot 】: 8 slots 【Front Interface】 : USB3.2 Gen2 Type-C*1/USB3.0*(2IN1)
- 【Size】: W355*D403*H350mm 【Material】: Steel plate, Al plate, wood,【G.W.】7.5KG
Full Specifications
| Brand | Jonsbo |
|---|---|
| Color | Black |
| Weight | 7.5kg |
| Material | Aluminum, Metal |
| Case Type | Full Tower |
| Model Name | N5 |
| Compatibility | PC |
| Cooling Method | Air, Water |
| Number of Fans | 3 |
| Total Usb Ports | 2 |
| Antenna Location | Business |
| Compatible Devices | Motherboards (ITX/M-ATX/ATX/E-ATX), GPUs (up to 4), HDDs (up to 12), SSDs (up to 4), Cooling systems (up to 240mm/280mm AIO) |
| Enclosure Material | Aluminum, Metal |
| Total USB 2.0 Ports | 1 |
| Total USB 3.0 Ports | 1 |
| Warranty Description | 2 Year Manufacturer |
| Hard Disk Form Factor | 3.5 Inches |
| Supported Motherboard | ATX, Extended ATX |
| Internal Bays Quantity | 16 |
| Item Dimensions D x W x H | 15.8"D x 13.9"W x 13.8"H |
| Full listing title | JONSBO N5 NAS Pc Case, E-ATX,12HDD+4SSD Drive Bay GPU HP Host, Supports Max. 4 GPU,E-A.TX(330mm) MB/ATX PSU Supports, with 3 Fans Built-in, 8 Slots PCI, Solid Wood Veneer Computer Case,Home Server |
Ready to buy?
JONSBO N5 NAS Pc Case, E-ATX,12HDD+4SSD Drive Bay GPU HP Host, Supports Max. 4 GPU,E-A.TX(330mm) MB/ATX PSU Supports, with 3 Fans Built-in, 8 Slots PCI, Solid Wood Veneer Computer Case,Home Server is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Genesis Mini vs SNES Classic vs Raspberry Pi 4: Which Retro Setup Wins in 2026?
- NotebookLM Now Runs Code: Self-Hosting the Same Idea on a 12GB GPU
- Backing Up Vintage IDE Drives to CompactFlash in 2026
- Best Budget NVMe SSD for a Big Steam Library: WD Blue SN550 vs SATA
- HyperX QuadCast 2 vs Blue Yeti for Twitch in 2026
- PFlash on a Single RTX 3090: 10× Prefill Speedup at 128K Context vs llama.cpp
- 8BitDo SN30 Pro on SNES Classic and Genesis Mini: Bluetooth Setup Guide
- Self-hosting an OpenAI-compatible LLM gateway with LiteLLM
- Run DeepSeek & Qwen Locally on an RTX 3060 12GB (2026 Guide)
- Can a Raspberry Pi 4 8GB Run a Local LLM? Ollama Tiny-Model Benchmarks
- Athlon XP + Radeon 9800 Pro AGP Build Guide: 2003 Period-Correct Rig
- retrorecs.com: A New Retro Game Recommendation Engine
- Best SSD for the PS4 Pro in 2026: SATA Upgrade Guide
- What Rig Runs an AI Agent Locally? Building for the Agent Era
- Best PC Controller in 2026: DualSense vs GameSir G7 SE vs HORIPAD
- Panther Lake NPU vs RTX 3060 12GB for Local LLM Inference
- Best Budget Local-LLM Box: RTX 3060 12GB + Ryzen 5 5600G
- Inside the Creative Katana V2X Soundbar Teardown — and What It Says About Sound Blaster
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- Dual RTX 3090 vs RTX 5090: Gaming vs AI Training
- Benchmarking Asus Tablet Repairability Scores 2026
- Best Budget AM4 Gaming Build Parts in 2026
- Best Streaming Gear for Twitch Beginners in 2026
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090