GDSTIME 60mm 12V Fan 3 Pin

SpecPicks Verdict

SpecPicks scored GDSTIME 60mm 12V Fan 3 Pin using a rating × review-volume × price-fit model applied to published specs and reviews across the processors category. GDSTIME's processors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for processors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

• Compact Size: Ideal replacement for noisy or broken 12V 6cm fans in PC case, 3D printers power supply / control box, mini-ITX build, HTPC, computer motherboard, DVRs, NAS, hard drives, projectors, switches, other small electronic, network and storage devices, etc.
• Low Noise Moderate Airflow: 60x60x10 mm 12v dc fan airflow 14.3 CFM and speed 3500 RPM are moderate; the noise is relatively low at 25.4 dBA; which can meet the cooling needs of general equipment and suitable for equipment that requires silent operation
• 3-Pin Connector: The 3-pin connector correspond to the power (red wire), ground (black wire), and tachometer (RPM) signals (yellow wire) that the fan uses to function and provide feedback to the motherboard; Cable Length: 9.84 inches
• 6010 Fan 3-Pin Specs: 60 x 60 x 11 mm ( 2.36 x 2.36 x 0.43 inch ) | Rated Voltage: 12V | Rated Current: 0.1 Amp | Power: 1 Watt | Speed: 3500 RPM | Noise: 25.4 dBA | Airflow: 14.3 CFM | Static Pressure: 0.12 In H2O | Bearing: Sleeve
• What You Get: Includes 2 Pack DC 12 volts 3-pin 60x60x11 mm brushless cooling fans; 2pcs fan guards; 8 pcs screws and nuts; The lightweight ultra thin design won't take up much space, suitable for installation in equipment with limited space

Full Specifications

Ready to buy?

GDSTIME 60mm 12V Fan 3 Pin, 10mm Slim PC Computer CPU Cooling Fans, 2-Pack | 60x60x10mm, 6010, Ultra-Thin, DC Brushless Case Cooler, for NAS, DVR, 3D Printer Power Supply, Mini ITX Build is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →