SHINYSNAKE L300 Mesh Mini ITX Handled PC Case
Bottom line: The SHINYSNAKE L300 Mesh Mini ITX Handled PC Case is a specs-and-price decision rather than a crowd-consensus one in the pc cases category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Needs a free PCIe slot — check which of your board's slots are wired for it
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SHINYSNAKE L300 Mesh Mini ITX Handled PC Case, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the pc cases category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【ULTRA-COMPACT VERTICAL DESIGN】: Space-Saving Compact 8.5L Vertical ITX Chassis (7.4" x 5.3" x 14"/188 x 135 x 356mm) maximizes desk space while housing DUAL-SLOT GPUs up to 12.8" (325mm), such as RTX 3060/3080 GPU. Perfect for gamers, creators, and professionals who want desktop-grade power in a portable mini-ITX build – weighs just 4.4lbs (2kg), 60% lighter than bulky traditional towers.
- 【ADVANCED MESH COOLING SYSTEM】: Dual 120x15mm ultra-slim fans and full-perforation steel mesh side panels create optimized airflow (side intake → top exhaust) to dissipate GPU/CPU heat fast. High-density mesh blocks dust without sacrificing airflow – ideal for long gaming sessions or 3D rendering.
- 【GPU FRIENDLY SOLUTIONS】: Includes a special-designed dual reverse PCIe 3.0 riser cable (Notice: To ensure stable performance, please manually set PCIe mode to Gen3 in your motherboard BIOS) and a 1.5m DP 1.4 extension cable supporting 4K@120Hz/2K@240Hz – eliminate signal loss and simplify multi-monitor setups for NVIDIA/AMD GPUs.
- 【RUGGED YET PORTABLE FRAME】: Lightweight high-density steel construction with scratch-resistant finish and reinforced corners; anti-vibration silicone feet enhance stability for on-the-go Gaming. Features a side-mounted steel handle – grab-and-go design for LAN parties, college dorms, or business trips.
- 【EXPANDABLE I/O & POWER】: Front panel includes 1x Type-C (10Gbps) and 2x USB 3.0 (5Gbps) ports for rapid file transfers. Compatible with SFX/SFX-L PSUs and 2.5" HDD/SSD mounts – upgrade storage without sacrificing portability.
- 【EXPERT COMPATIBILITY GUIDANCE】: Free 1-on-1 compatibility check! Send your specs (GPU model/motherboard type/PSU, etc.) for instant optimization tips. Skip the guesswork and BIOS headaches – build with confidence using our expert-verified solutions!
Full Specifications
| Brand | SHINYSNAKE |
|---|---|
| Color | White + PCI-e 3.0 |
| Weight | 2kg |
| Fan Size | 120 Millimeters |
| Material | Acrylonitrile Butadiene Styrene (ABS), SPCC |
| Case Type | Mini-Tower |
| Dimensions | 188 x 135 x 356mm |
| Model Name | L300 |
| Connectivity | USB |
| Compatibility | PC |
| Cooling Method | Air |
| Number of Fans | 2 |
| Total Usb Ports | 3 |
| Antenna Location | Business, Gaming |
| Vibration/Rumble | Yes |
| Compatible Devices | 120mm Fans, CPU cooling height ≤60mm, GPU dimension:≤325mm without top fan, ≤315mm with top fan, Mini-ITX Motherboard, SFX/SFX-L PSU |
| Enclosure Material | Acrylonitrile Butadiene Styrene (ABS), SPCC |
| Total USB 3.0 Ports | 2 |
| Warranty Description | 2 year |
| Hard Disk Form Factor | 2.5 Inches |
| Full listing title | L300 Mesh Mini ITX Handled PC Case, 8.5L Simple Compact Desktop Chassis with Dual Reverse PCIe 3.0 Riser Cable & DP 1.4 Cable, SFX/SFX-L PSU, H120mm Cooler, White |
Ready to buy?
L300 Mesh Mini ITX Handled PC Case, 8.5L Simple Compact Desktop Chassis with Dual Reverse PCIe 3.0 Riser Cable & DP 1.4 Cable, SFX/SFX-L PSU, H120mm Cooler, White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- Can You Run Local TTS on an RTX 3060 12GB in 2026?
- Building a Silent Win98/XP Boot Drive: CompactFlash + IDE Adapter Setup
- Local AI on Raspberry Pi 5: Sourced Benchmarks for Llama, Phi, and Gemma
- Intel Arc Pro B60 Review 2025: Xe2 Workstation GPU Guide
- RTX 4080M Desktop Build: 100W Gaming vs. RX 9070 GRE
- Best Gaming Mouse for Logitech G502 Hero Loyalists in 2026
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026? Ollama tok/s + SSD-Boot Setup
- KOORUI vs Samsung Odyssey: Best 27-inch 4K Gaming Monitor in 2026
- GameSir G7 SE vs 8BitDo Pro 2 for PC Gaming: Wired Precision vs Wireless Flexibility
- Microsoft's SkillOpt Boosts Models With Just a Markdown File — What It Means for Your Local RTX 3060 Rig
- Noctua NH-U12S vs Cooler Master ML240L RGB for a Ryzen 7 5800X gaming build: which cooler actually holds…
- Raspberry Pi 5 vs Pi 4 8GB for Homelab: Which Should You Buy?
- How to run Llama 3.1 8B on Apple M4 Max
- Best Mini PC Deals 2026 for Local AI and Home Labs
- OpenAI Codex Now Repeats a Task After Watching Once — Local Agentic Alternatives
- Qwen 3.6 vs Frontier Models on a Local Rig: The Honest Gap
- CompactFlash to IDE 50-Pin Adapters: A Retro Storage Buyer's Guide for 2026
- Ryzen AI Max+ 395 Specs: Full Breakdown and Comparison
- Stable Diffusion vs Flux — which open image model wins in 2026?
- Can a Ryzen 5 5600G Run Local LLMs With No GPU? CPU + iGPU Inference Tested
- Local LLM vs Claude in 2026: When On-Device Beats the API
- Anthropic Launches Claude Science for Researchers
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090