Thermaltake CT140 EX Reverse ARGB Sync PC Cooling Fan 3 Pack (CL-F230-PL14RG-A)
Bottom line: The Thermaltake CT140 EX Reverse ARGB Sync PC Cooling Fan 3 Pack: 9-blade design hits 90.3 CFM and 3.07mm-H2O static pressure at 1800 RPM; main trade-off: reverse-blade layout is niche - wrong pick for standard intake or radiator duty.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 9-blade design hits 90.3 CFM and 3.07mm-H2O static pressure at 1800 RPM
- ✓ MagForce 2.0 magnetic fan-to-fan pads resist signal dropout from misalignment
- ✓ Wide 500-1800 RPM range lets you idle quiet and ramp under load
- ✓ 9 LEDs per fan with 16.8M colors over a standard 3-pin 5V ARGB header
- ✓ Hydraulic bearing rated to spin up to 2000 RPM for long service life
Cons
- ✗ Reverse-blade layout is niche - wrong pick for standard intake or radiator duty
- ✗ Racing Green colorway locks you into a specific build palette
- ✗ No included ARGB controller; needs a motherboard 5V header and its software
- ✗ 3-pack only, so single-fan gap-fillers mean buying two extra
Manufacturer description
Introducing the Thermaltake CT EX ARGB lineup of fan, sharing the same benefits of matching the stock case fans and aesthetics as the original CT fans the new EX line up has some added tricks to make them even better. Using our new MagForce 2.0 tech the CT fan lineup has been upgraded to magnetic fan to fan connections as well as a magnetic daisy chain cable to provide quick and easy installation and maintenance.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermaltake CT140 EX Reverse ARGB Sync PC Cooling Fan 3 Pack, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. On the listing's own facts, the case for it is "9-blade design hits 90.3 CFM and 3.07mm-H2O static pressure at 1800 RPM"; the main trade-off is "Reverse-blade layout is niche - wrong pick for standard intake or radiator duty". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【MagForce 2.0】 Improving on our original MagForce design we have retained all the same great features like fan to fan magnetic connections and magnetic daisy chain cables to make linking multiple fans together easy. However, this time around we drastically increased the surface area of the pin to pad contacts allowing for much better connection and preventing issues like signal drop out from misalignment.
- 【Complete Your Build】 Our CT line up was designed to perform and compliment the look of existing case fans for a full matching experience.
- 【Optimal Airflow】 Our CT lineup utilizes 9 optimized fan blades to deliver up to 90.3 CFM of airflow and 3.07mm-H20 of static pressure at 1800 RPMs.
- 【ARGB Synced】 Powered by a 3-Pin 5V ARGB Connector for simple set up, each fan has 9 LEDs capable of 16.8 million colors easily customized and controlled via motherboard software.
- 【Hydraulic Bearing】 Great for silent and reliable operation while still being able to provide performance when necessary the CT hydraulic bearings were a great pairing allowing them to reach up to 2000 RPMs and maintaining a high life expectancy.
Full Specifications
| Brand | Thermaltake |
|---|---|
| Model | CL-F230-PL14RG-A |
| Voltage | 12 volts |
| Wattage | 3 watts |
| Material | Copper ABS |
| Noise Level | 32.8 db |
| Part Number | CL-F230-PL14RG-A |
| Compatibility | PC |
| Material Type | Copper ABS |
| Cooling Method | Fan |
| Number of Items | 1 |
| Air Flow Capacity | 90.3 cfm |
| Compatible Devices | Desktop |
| Power Connector Type | 4-Pin |
| Warranty Description | 2 Year Manufacturer |
| Maximum Rotational Speed | 1800 rpm |
| Item Dimensions L x W x H | 5.51"L x 5.51"W x 0.98"H |
| Full listing title | Thermaltake CT140 EX Reverse ARGB Sync PC Cooling Fan 3 Pack, 500~1800 RPM, 5V Mobo Sync, 16.8 Million Colors 9 LEDs, MagForce 2.0 Connectors, Hydraulic Bearing, Racing Green, CL-F230-PL14RG-A |
Benchmark data for other processors
Ready to buy?
Thermaltake CT140 EX Reverse ARGB Sync PC Cooling Fan 3 Pack, 500~1800 RPM, 5V Mobo Sync, 16.8 Million Colors 9 LEDs, MagForce 2.0 Connectors, Hydraulic Bearing, Racing Green, CL-F230-PL14RG-A is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Building a Local LLM Workstation on a Raspberry Pi 5 + Ryzen 7 5800X Hybrid
- Hobbyist Turns a Raspberry Pi and ADS-B Into a Viral Real-Time Airport Tracker
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- Intel Axes BigDL/IPEX-LLM: Where Local Inference Goes Now
- How Fast Is Local LLM Inference on a Ryzen 7 5800X (CPU-Only, No GPU)?
- What Is Mistral AI? The OpenAI Rival Explained (2026)
- Razer Blade 16 (2026) Review: Gaming Performance and Endurance
- DeepSeek Tops US AI Vendor Charts in June 2026 as Firms Chase Cheaper AI
- RTX 5090 Benchmark Comparison: 4K Gaming, AI & Value (2026)
- AI-Driven Sound Blaster Driver Recovery on Win98 in 2026
- Using a Raspberry Pi 5 with AI to Recover Lost Windows 98 INF Files (2026)
- pxpipe: Hide Text in PNGs to Cut Claude Code Token Costs up to 70%
- Raspberry Pi 4 8GB as a Low-Power Quake 3 / OpenArena / UT99 Dedicated Server (2026 Build Log)
- Build a Raspberry Pi 4 Cyberdeck Music Workstation in 2026
- Best Retro Console Reissues to Buy in 2026
- Build a Raspberry Pi 4 NAS With an SSD in 2026
- hipEngine on Strix Halo + 7900 XTX: Native Qwen 3.6 Inference Without ROCm Drama
- Anthropic Extends Free Fable 5 as GPT-5.6 Sol Heats Pricing War
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- StarCraft Brood War in 2026: Joining Battle.net Classic, the Fish Server, and ASL Pro Circuit
- What Hardware Runs a Gemini-Class Model Locally in 2026?
- Best CPU Cooler for AM4 + Ryzen 5000 in 2026
- Build a Privacy-First Ring Alternative on a Raspberry Pi 4 in 2026
- Best GPU for Running Ollama on 12GB VRAM in 2026: RTX 3060 12GB Deep-Dive
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090