Thermaltake CT120 EX Reverse ARGB Sync PC Cooling Fan 3 Pack (CL-F223-PL12BB-A)
Bottom line: The Thermaltake CT120 EX Reverse ARGB Sync PC Cooling Fan 3 Pack: Up to 68 CFM airflow and 2.95mm-H2O static pressure at 2000 RPM; main trade-off: reverse-blade design suits intake/bottom mounts, not every fan position.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Up to 68 CFM airflow and 2.95mm-H2O static pressure at 2000 RPM
- ✓ MagForce 2.0 magnetic fan-to-fan links cut cable clutter on install
- ✓ 9 LEDs per fan, 16.8M colors via 3-pin 5V ARGB motherboard sync
Cons
- ✗ Reverse-blade design suits intake/bottom mounts, not every fan position
- ✗ 2000 RPM top speed means audible noise at full tilt
- ✗ Needs a 3-pin 5V ARGB header; 12V RGB boards are incompatible
- ✗ Bumblebee colorway locks the frame to a yellow-and-black look
Manufacturer description
Introducing the Thermaltake CT EX ARGB lineup of fan, sharing the same benefits of matching the stock case fans and aesthetics as the original CT fans the new EX line up has some added tricks to make them even better. Using our new MagForce 2.0 tech the CT fan lineup has been upgraded to magnetic fan to fan connections as well as a magnetic daisy chain cable to provide quick and easy installation and maintenance.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermaltake CT120 EX Reverse ARGB Sync PC Cooling Fan 3 Pack, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. On the listing's own facts, the case for it is "Up to 68 CFM airflow and 2.95mm-H2O static pressure at 2000 RPM"; the main trade-off is "Reverse-blade design suits intake/bottom mounts, not every fan position". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【MagForce 2.0】 Improving on our original MagForce design we have retained all the same great features like fan to fan magnetic connections and magnetic daisy chain cables to make linking multiple fans together easy. However, this time around we drastically increased the surface area of the pin to pad contacts allowing for much better connection and preventing issues like signal drop out from misalignment.
- 【Complete Your Build】 Our CT line up was designed to perform and compliment the look of existing case fans for a full matching experience.
- 【Optimal Airflow】 Our CT lineup utilizes 9 optimized fan blades to deliver up to 68 CFM of airflow and 2.95mm-H20 of static pressure at 2000 RPMs.
- 【ARGB Synced】 Powered by a 3-Pin 5V ARGB Connector for simple set up, each fan has 9 LEDs capable of 16.8 million colors easily customized and controlled via motherboard software.
- 【Hydraulic Bearing】 Great for silent and reliable operation while still being able to provide performance when necessary the CT hydraulic bearings were a great pairing allowing them to reach up to 2000 RPMs and maintaining a high life expectancy.
Full Specifications
| Brand | Thermaltake |
|---|---|
| Model | CL-F223-PL12BB-A |
| Material | Plastic |
| Noise Level | 32.8 db |
| Part Number | CL-F223-PL12BB-A |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Fan |
| Number of Items | 1 |
| Number of Packs | 3 |
| Air Flow Capacity | 68 cfm |
| Compatible Devices | Desktop |
| Power Connector Type | 3-Pin |
| Warranty Description | 2 Year Manufacturer |
| Maximum Rotational Speed | 2000 rpm |
| Item Dimensions L x W x H | 8.89"L x 5.79"W x 3.5"H |
| Full listing title | Thermaltake CT120 EX Reverse ARGB Sync PC Cooling Fan 3 Pack, 500~2000 RPM, 5V Mobo Sync, 16.8 Million Colors 9 LEDs, MagForce 2.0 Connectors, Hydraulic Bearing, Bumblebee, CL-F223-PL12BB-A |
Benchmark data for other processors
Ready to buy?
Thermaltake CT120 EX Reverse ARGB Sync PC Cooling Fan 3 Pack, 500~2000 RPM, 5V Mobo Sync, 16.8 Million Colors 9 LEDs, MagForce 2.0 Connectors, Hydraulic Bearing, Bumblebee, CL-F223-PL12BB-A is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3.7-Plus Goes Agentic: Cloud Model vs Your Local 12GB Rig
- Samsung's 256GB microSD Drops to $47.99 — and What It Means for Cheap Storage
- Crucial BX500 vs Samsung 870 EVO: Best 2.5" SATA SSD for a Budget Build
- Best Cooling for AMD Ryzen Overclocking in 2026
- GameSir G7 SE vs DualSense: Which Controller Is Better on PC in 2026?
- Best Mouse Pad for Office Productivity and Long Hours (2026)
- Local Video-Gen on 12GB: What an RTX 3060 Does in the Gemini Omni Flash Era
- Blue Yeti vs HyperX QuadCast 2: Best Budget Streaming Mic Setup in 2026
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- Raspberry Pi 500 Plus: The Real Lineup vs. the Rumors
- Best SSDs for a Raspberry Pi homelab NAS in 2026
- Best Sim Racing Gear for Beginners in 2026
- Best Parts for an Always-On Local LLM Server in 2026
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Best Sim Racing Wheel and Shifter Combo for Beginners: Logitech G920 + Thrustmaster TH8A
- Crucial BX500 vs SanDisk SSD Plus vs WD Blue: Best Budget SATA SSD for a Boot Drive
- Ryzen 7 9800X3D vs Ryzen 9 9950X3D: Which X3D Wins at 1440p in 2026?
- DwarfStar Distributed Inference: Splitting a Single LLM Across a Home LAN of Mismatched GPUs
- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- RTX 5090 AI Models: Performance, VRAM, Power
- Best Raspberry Pi Heatsink and Cooling Kits for Pi 5 in 2026
- Local LLM vs Claude in 2026: What an RTX 3060 12GB Rig Actually Replaces
- Best CPU Cooler for the Ryzen 7 5800X in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090