uxcell 8pcs G1/4 Fitting
Bottom line: Per its Amazon listing, the uxcell 8pcs G1/4 Fitting: thread Size: G1/4", Nozzle Dia: 10mm, Size: 26mm x 17mm (L x W); this barb fitting has a G1/4" thread at one side and a 10mm OD nozzle at the other size.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ [PARAMETER] Thread Size: G1/4", Nozzle Dia: 10mm, Size: 26mm x 17mm (L x W)
- ✓ Backed by uxcell's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Description:A PC water cooling barb fitting is a connector which can secure soft tubing to components of pc water cooling system for coolant flow in liquid-cooling loops.Application:PC water cooling is a more stable and effective cooling system than traditional air cooling. A good barb fitting can stabilize the hose in the PC water cooling system, improve the efficiency of coolant flow and reduce the risk of leakage. Very suitable for 240, 360 water cooling system.Specifications:Material: AluminiumWith the Sealing Ring: Yes, SiliconeThread Size: G1/4Nozzle Dia: 10mmSize: 26mm x 17mm (L x…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for uxcell 8pcs G1/4 Fitting, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [PARAMETER] Thread Size: G1/4", Nozzle Dia: 10mm, Size: 26mm x 17mm (L x W)
- [MATERIAL] This PC water cooling barb fitting is made from aluminium, which can provide great durability and long lasting use.
- [SEALING] The extension connector comes with a silicone sealing ring.
- [FEATURE] This barb fitting has a G1/4" thread at one side and a 10mm OD nozzle at the other size.
- [APPLICATION] PC water cooling is a more stable and effective cooling system than traditional air cooling. A good barb fitting can stabilize the hose in the PC water cooling system, improve the efficiency of coolant flow and reduce the risk of leakage. Very suitable for 240, 360 water cooling system.
Full Specifications
| Brand | uxcell |
|---|---|
| Model | a25052000ux2928 |
| Unit Count | 1.0 Count |
| Part Number | a25052000ux2928 |
| Compatibility | PC |
| Number of Items | 4 |
| Included Components | Fitting |
| [PARAMETER] Thread Size | G1/4", Nozzle Dia: 10mm, Size: 26mm x 17mm (L x W) |
| Full listing title | uxcell 8pcs G1/4 Fitting, G1/4 Thread with 10mm OD Nozzle PC Water Cooling Hose Barb Fitting for PC Water Cooling System Accessories |
Benchmark data for other processors
Ready to buy?
uxcell 8pcs G1/4 Fitting, G1/4 Thread with 10mm OD Nozzle PC Water Cooling Hose Barb Fitting for PC Water Cooling System Accessories is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Run a Local LLM on a Raspberry Pi 4 (8GB) in 2026: What Actually Works and How Slow It Is
- Chrome Using Too Much RAM? Fixes + Hardware Upgrades
- Pentium III Tualatin Overclocking and Slotket Build Guide: The Forgotten King of Socket 370
- Is vLLM Worth It If You're Not Serving Other Users?
- Can Local Qwen 3.6 Match Frontier Models at Canvas Code?
- GLM-5.2 vs Claude Opus 4.7: Open-Weights Value on Local GPUs
- Anthropic Backs Off Billing Overhaul as Price War Heats Up
- 4K Mini-LED vs 240 Hz QD-OLED: Which Monitor for Work and Play?
- 'Count Anything' AI Model Does Object Counting — Harder Than It Sounds
- Best CPU Cooler for AMD Ryzen 7 5800X High-TDP Builds (2026)
- RTX 3060 12GB vs Arc A770 16GB for Stable Diffusion in 2026
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- Wired vs Bluetooth Headsets for Competitive FPS in 2026: The Latency Math
- Best CPU for Gaming in 2026: Intel vs AMD Showdown
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- Ryzen 5 5600G vs Ryzen 7 5700X for Budget 1080p Gaming
- Is the RTX 3060 12GB Still Worth Buying in 2026?
- AMD Ryzen 7 5800X3D Re-Review Shows DDR4 Still Has Gaming Legs in 2026
- Raspberry Pi 4 8GB as a Low-Power Quake 3 / OpenArena / UT99 Dedicated Server (2026 Build Log)
- Ryzen 5 5600X vs Ryzen 7 5800X: CPU-Only Qwen2.5 14B (2026)
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
- Anthropic's 2GW AMD Deal: Should You Still Run Local?
- OpenAI vs Anthropic Token Price War: When a $300 GPU Wins
- AMD Ryzen AI Halo vs NVIDIA DGX Spark — or Just an RTX 3060?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090