2 Pcs 100W 0.33 Ohm Wirewound Resistor, Aluminum Shell, Green
Bottom line: The FOCMKEAS 2 Pcs 100W 0.33 Ohm Wirewound Resistor is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Confirm socket / form-factor / power-rating compatibility against your build before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
FOCMKEAS Aluminum Shell Resistor is designed to solve problems like circuit overload and unstable current.Its core advantages come from precise construction: nickel-chromium alloy resistance wire wound on a ceramic skeleton, paired with an aluminum alloy shell and heat dissipation grooves—ensuring high-power capacity while quickly dissipating heat to avoid performance loss due to high temperature.Product Features:±5% tolerance precisely matches circuit needs; low-inductance design reduces signal interference;Hole tabs and base mounting holes enable one-step wiring and fixation, suitable for…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for FOCMKEAS 2 Pcs 100W 0.33 Ohm Wirewound Resistor, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Size:Nominal 0.33 Ohm resistor, tolerance ±5%,rated power 100W;base length 60mm/2.36in,width 15mm/059in,fixing screw hole diameter 3.5mm(2 holes,distributed on the same sides),hole spacing 43.5mm/1.71in;Length of splice taps provided is 12mm/0.47in
- Resistor Core:Wirewound resistors uses insulated ceramic rod as skeleton,with nickel-chromium alloy resistance wire uniformly wound,high precision resistance value;Small in size but high in power,resistant to high temperature and overload
- Shell design:Aluminum alloy shell with heat dissipation grooves,for excellent heat dissipation and prevent damage;Housed case resistor with hole splice tabs on both sides for easy wire connection,base with screw mounting holes ensuring stable installation
- Superior Performance: Aluminum housed load resistor enable to precisely controls circuit current, protect components from damage; maintains stable resistance within a wide temperature range, minimizing environmental impact for circuits
- Applications: Aluminum housing resistor very suitable as inverter resistor,car LED resistor, speaker resistor, frequency divider,servo motor resistor,widely used in doorbell, transformer, power supply, arena audio and automation equipment in industry
Full Specifications
| Brand | FOCMKEAS |
|---|---|
| Model | resistance value |
| Manufacturer Part Number | 0.33 Ohm |
Ready to buy?
2 Pcs 100W 0.33 Ohm Wirewound Resistor, Aluminum Shell, Green is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- GLM-5.2 Local: What GPU Actually Runs the Top Open-Weights LLM
- Best Streaming Kit for Beginners in 2026: Mic, Cam, and Lights
- 1440p Gaming PC Build 2026: Cost, Parts, FPS
- How to run Llama 3.1 8B on Apple M4
- Grok Imagine 1.5 Shipped 720p Video — Run Local Image/Video Gen Instead
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
- GTX 1660 VRAM: Why 8GB Doesn't Exist (Real Specs)
- Q4_K_M Is Fine for Chat, a Trap for Agents: KV Cache Quant Math for Local Coding
- Best NVMe SSD for PC Gaming Builds in 2026
- Best Single-Board Computers for Home Lab in 2026
- Best GPU for Local Llama 3 8B Under $400: Why the RTX 3060 12GB Wins
- Best Raspberry Pi Alternatives for AI in 2026
- Local AI Image Generation: Best AMD GPUs for 2026
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Ryzen 7 5800X + RTX 5060 Combo Hits $439 With Cooler
- Running Qwen 3.6 27B on a Single RTX 3060 12GB: Quantization, Context, and Real Tok/s
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
- Build a 2001 GeForce3 + Win98 SE Gaming Rig in 2026: Parts and Gotchas
- Imaging a 1998 IDE Drive and Letting an LLM Rebuild Win98
- GPT-5.6 Pro's Three-Model Split: What It Means for Local RTX 3060 Builders
- OpenAI's Codex Price War: When Local Coding on an RTX 3060 Wins
- Voodoo 5 6000 Stability: Hangs, Wedges and a Bricked Board
- Nintendo Switch Steering Wheel V2: A 3D-Printed Accessibility Controller
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090