SANOOV 27W 5.1V 5A GaN PD USB-C Power Supply for Raspberry Pi 5
Bottom line: Per its Amazon listing, the SANOOV 27W 5.1V 5A GaN PD USB-C Power Supply for Raspberry Pi 5: compact and Portable - The SANOOV PD 27W power supply designed for convenience.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Compact and Portable - The SANOOV PD 27W power supply designed for convenience
- ✓ Backed by SANOOV's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SANOOV 27W 5.1V 5A GaN PD USB-C Power Supply for Raspberry Pi 5, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatibility - The SANOOV black GaN 27W USB C Power Supply is compatible with Raspberry Pi 5 16GB/8GB/4GB/2GB. Power Delivery Support - The adapter is equipped with Power Delivery technology, allowing for fast and efficient charging of compatible devices.
- Multiple Output Options - The SANOOV black GaN 27W USB-C PD Power Supply (with 1.3M Length) Output: 5.1V/5A Input: AC100-240V. It allows the the Pi 5 to power a wider range of peripherals, and offers a variety of output voltage options, including 5V at 5A, 9.0V at 3.0A, 12.0V at 2.25A, and 15.0V at 1.8A.
- Safe and Reliable - The SANOOV PD 27W power supply is equired with 6-layer Protection Function.Including various functions such as over-power protection, over-current protection, short-circuit protection, over-voltage protection, low-voltage protection, and electrostatic protection.
- Compact and Portable - The SANOOV PD 27W power supply designed for convenience, the compact form factor of the adapter makes it easy to carry, ensuring you have a reliable power source wherever you go. This adapter is suitable for use worldwide, making it a travel-friendly power solution.
- For Pi 5:The total power drawn from the four USB ports on Pi 5 is limited by default to a nominal 600mA; this limit is automatically increased to a nominal 1.6A when the USB-C PD Power Supply is detected.
Full Specifications
| Brand | SANOOV |
|---|---|
| Wattage | 27 watts |
| Model Name | 5.1V 5A GaN PD USB-C Power Adapter for Raspberry Pi 5 |
| Unit Count | 1 Count |
| Form Factor | External |
| Connectivity | USB-C |
| Model Number | XSL-GaN-27W USB-C Power Supply US |
| Connector Type | USB-C |
| Cooling Method | Air |
| Output Wattage | 5.1 |
| Item Dimensions | 1.38 x 0.98 x 3.15 inches |
| Number of Items | 1 |
| Compatible Devices | Laptop, Phone, Raspberry pi 4b 8/4/2/1gb, Raspberry pi 5 16/8/4/2gb, Raspberry pi 500 |
| Warranty Description | 1 year |
| Maximum Input Voltage | 240 volts_of_alternating_current |
| Minimum Input Voltage | 100 volts_of_alternating_current |
| Item dimensions L x W x H | 1.38 x 0.98 x 3.15 inches |
| System Bus Connector Type | USB-C |
| Connector Type Used on Cable | USB-C |
| Full listing title | 27W 5.1V 5A GaN PD USB-C Power Supply for Raspberry Pi 5 | Power Adapter Compatible with Raspberry Pi 5 16GB,8GB,4GB,2GB,5V 5A PD USB Power Supply official,Rpi 5 Power Supply |
Ready to buy?
27W 5.1V 5A GaN PD USB-C Power Supply for Raspberry Pi 5 | Power Adapter Compatible with Raspberry Pi 5 16GB,8GB,4GB,2GB,5V 5A PD USB Power Supply official,Rpi 5 Power Supply is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for New Streamers
- Amstrad CPC 464/6128 Emulator on Raspberry Pi Pico 2
- Ryzen 7 5700X vs 5800X for 1080p & 1440p Gaming in 2026
- IPEX-LLM + Ollama on Intel Arc: Setup, tok/s, and the RTX 3060 Reality Check
- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- Raspberry Pi RP2350 Emulates a Z80 in Real Time — What That Actually Means
- Best Capture Device for Recording Retro Consoles and Old PCs in 2026
- BOSGAME VTA-439: A Linux-Friendly Ryzen AI Mini PC
- Mistral Medium 3.5 Hardware Requirements: 128B Dense, 78 GB at Q4
- Ryzen 7 5800X vs 5800X3D for 1440p Gaming: Which Should You Buy?
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- Gemini Intelligence Hardware Requirements: What Google's Stack Tells Us About Local Inference
- Copilot Cowork Goes Usage-Based: The Local-Rig Cost Case in 2026
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
- RTX 5070 Ti + Ryzen 7 9850X3D: Is It a Good Combo?
- Ryzen 5 2600 vs Ryzen 7 5800X for CPU-Only Qwen3 30B-A3B (2026)
- Local AI on Raspberry Pi 5: Sourced Benchmarks for Llama, Phi, and Gemma
- FREENOVE Ultimate Starter Kit on Raspberry Pi 4 8GB: 30 Projects Tested for First-Time Makers and Robotics…
- Best Hardware for a Home Game Server in 2026
- Claude Fable 5 Launches at #1 on the Intelligence Index — What Local Builders Should Take Away
- Troubleshooting Corsair 12V-2x6 Cable Issues on RTX-Class GPUs (2026)
- Is an RTX 3060 Enough for 4K Gaming? Pairing It With a Budget 4K Monitor
- AMD Ryzen 7 5800X3D Re-Review Shows DDR4 Still Has Gaming Legs in 2026
- Horse Riding Game Controller for PC/Mac: Buy or Build
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090