ELFJMZP 2-Pack Motherboard Front Panel Extension Cables
Bottom line: The ELFJMZP 2-Pack Motherboard Front Panel Extension Cables: Two full sets: Power SW, Reset SW, HDD LED+/-, Power LED+/- in each; main trade-off: no anti-reverse latch, so connectors can be plugged in backward.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two full sets: Power SW, Reset SW, HDD LED+/-, Power LED+/- in each
- ✓ 2.54mm Dupont male-to-female ends plug straight onto JFP1 headers
- ✓ Tinned copper wire for stable conductivity
- ✓ Ultra-thin flat ribbon cuts clutter in compact ATX/Micro-ATX cases
- ✓ HDD and Power LED leads marked with +/- polarity
Cons
- ✗ No anti-reverse latch, so connectors can be plugged in backward
- ✗ No standalone power switch included, only the switch leads
- ✗ Listing conflicts on length (50cm vs 32cm) and gauge (22 vs 24AWG)
- ✗ No USB, audio or speaker leads, only switch and LED pins
SpecPicks Verdict
SpecPicks scored ELFJMZP 2-Pack Motherboard Front Panel Extension Cables using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. ELFJMZP's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Motherboard Front Panel Extension Cables Includes hard drive indicator light (HDD LED±), power indicator light (POWER LED±), power button cable (POWER SW), reset button cable (RESET SW), but does not include a separate power switch.
- Motherboard Extension Wire 24AWG tinned copper wire, stable conductivity, 32cm/12.6in length suitable for compact chassis, ultra-thin flat design, reduces clutter inside the chassis.
- 2.54 Dupont connector male and female connector design, directly connected to the JFP1 interface on the motherboard, but without anti-reverse insertion latches. Please pay attention to the direction during installation (HDD/POWER LED marked with +/- polarity).
- Suitable for standard ATX/Micro-ATX motherboard front panel expansion, repairing old chassis wiring or modifying wiring
- Each set contains two complete cable sets (POWER SW, RESET SW, HDD LED±, POWER LED±) to meet backup or dual system requirements.
Full Specifications
| Brand | ELFJMZP |
|---|---|
| Cable Type | 22awg |
| Compatibility | Switch |
| Connector Type | 2.54mm Pin/Female Connector |
| Special Feature | 2.54 Dupont connector |
| Compatible Devices | ASRock, ASUS, BIOSTAR, GIGABYTE, MSI |
| Full listing title | 2-Pack Motherboard Front Panel Extension Cables,22AWG Flat Ribbon for HDD LED+/-, Power LED+/-, Power SW, Reset SW,for Computer Switch Reset HDD Hard Drive 50cm/19.7in (White) |
Ready to buy?
2-Pack Motherboard Front Panel Extension Cables,22AWG Flat Ribbon for HDD LED+/-, Power LED+/-, Power SW, Reset SW,for Computer Switch Reset HDD Hard Drive 50cm/19.7in (White) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Silent Pi 4 NVMe Homelab: Cooling, VESA, SSD Boot
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- Best Retro Mini Console & Handheld in 2026
- Dual RTX 3090 Ti in 2026: Worth It vs. the Alternatives?
- GeForce4 Ti 4600 tuning guide — ForceWare, Detonator, and XP/98 driver pairing
- Best Hardware for Running Qwen3 Locally in 2026
- LEGO Batman: Legacy of the Dark Knight Runs Well on Steam Deck
- How Companies Name Their Monitors: Brand-by-Brand Guide
- Intel Arc Pro B60 Gaming Performance: 2025 Benchmarks
- Tenstorrent TT-QuietBox 2 (Blackhole) vs RTX 5090: Should LLM Builders Care?
- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Raspberry Pi OS Now Ships on Linux 6.18 LTS With Performance Gains
- Best Streaming Gear for New Content Creators in 2026
- Get Up to $900 Off a Dell PC: Gaming & Everyday Deals
- Best Parts for a CPU-Offload Local LLM Build in 2026
- 2002 GeForce 4 Ti Win98 Build: CompactFlash Storage Done Right
- Arc B580 12GB vs RTX 3060 12GB: Which 12GB Card for 1440p in 2026?
- MicroPython Now Runs on the Super Nintendo — Here's What That Means
- Best Mechanical Keyboard for Office Work & Productivity (2026)
- Booting Windows 98 From CompactFlash: The Silent Solid-State Retro Drive
- Advanced Shader Delivery on the RX 9070 XT: Benchmark Results
- ComfyUI on an RTX 3060 12GB: SDXL Throughput and VRAM Tuning
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090