Rode Deadcat Wind Muff, Gray | Faux fur windshield with acoustic transparency for VideoMic, NTG-1 and NTG-2
Status: Rode Deadcat Wind Muff: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The Rode Deadcat Wind Muff: Acoustically transparent fur keeps dialogue clear, not muffled; main trade-off: fits a narrow RODE lineup, not a universal mic cover.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Acoustically transparent fur keeps dialogue clear, not muffled
- ✓ Shaped for the RODE VideoMic body so it seats snugly
- ✓ Also fits NTG-1 and NTG-2 shotgun mics
- ✓ Premium artificial fur over open-cell foam construction
Cons
- ✗ Fits a narrow RODE lineup, not a universal mic cover
- ✗ Long fur snags and mats without regular grooming
- ✗ Adds visible bulk to the mic in on-camera shots
- ✗ Foam-and-fur design offers no rain protection
Manufacturer description
The Rode DeadCat Wind Muff is the faux-fur windshield built for the RODE VideoMic, and it also fits the NTG-1 and NTG-2 shotgun microphones. Slip it over your mic before an outdoor shoot and the synthetic fur breaks up moving air before it reaches the capsule, killing the low-frequency rumble and buffeting that ruins otherwise usable takes. RODE builds its windshields from premium artificial fur over open-cell foam, and the fur is acoustically transparent, so dialogue and ambience come through with minimal coloration rather than the muffled, blanket-over-the-mic sound cheaper covers produce…
SpecPicks Verdict
SpecPicks scored Rode Deadcat Wind Muff using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. Rode's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Which microphones does the RODE DeadCat fit?
It is designed for the RODE VideoMic and also fits the NTG-1 and NTG-2 shotgun microphones. For any other mic, check the RODE listing for the matching windshield model.
Will the fur muffle my audio?
No. RODE uses acoustically transparent synthetic fur, shaped to cut wind with minimal impact on the recorded sound, so dialogue and ambience pass through rather than being dulled.
Is it worth it over the stock foam windscreen?
Foam handles indoor plosives; fur handles outdoor wind. If you shoot outside, the DeadCat is the layer that stops low-frequency buffeting the foam cap cannot.
Key Features
- High-performance windshield for the RØDE VideoMic
- Acoustically transparent synthetic fur
- All RØDE windshields are manufacturedusing high quality open cell foam and / or premium artificial fur.
- Designed and shaped to give optimum protection from wind with minimal impact on the recorded sound.
Full Specifications
| Brand | Rode |
|---|---|
| Color | Black |
| Impedance | 600 ohm |
| Model Name | DEADCAT |
| Unit Count | 1 Count |
| Model Number | DEADCAT |
| Power Source | Corded Electric |
| Audible Noise | 78 db |
| Polar Pattern | Unidirectional |
| Built-In Media | Rode DeadCat Windshield for VideoMic, NTG-1 and NTG-2 Microphones |
| Connector Type | 35 month jack |
| Item Type Name | iRig Voice |
| Frequency Range | 40Hz - 20kHz |
| Item Dimensions | 8.5 x 1 x 5.25 inches |
| Mfr Part Number | DEADCAT |
| Number of Items | 1 |
| Number of Packs | 1 |
| Antenna Location | Streaming |
| Compatible Devices | Microphone (VideoMic, NTG1, NTG2) |
| Enclosure Material | artificial fur |
Ready to buy?
Amazon shows no buyable offer for Rode Deadcat Wind Muff at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- How Companies Name Their Monitors: Brand-by-Brand Guide
- Steam Deck Sleep Mode: Should You Leave It Plugged In?
- Watching a Z80 Live From a Raspberry Pi RP2350
- Best Way to Stream a PS4 Pro to PC: Elgato Cam Link 4K Capture Setup
- Home Assistant on a Raspberry Pi 4 8GB in 2026: SSD Boot, Power Draw, Performance
- Imaging a Vintage IDE Drive to CompactFlash for a Silent Win98 Boot
- MSI MPG 322UR QD-OLED X24: 4K 240Hz Performance Analyzed
- Best PC Gaming Controller in 2026: GameSir G7 SE vs DualSense vs 8BitDo Pro 2
- Best Wireless Keyboard for Office and Hybrid Work in 2026
- Building a 2001 LAN-Party Rig: Pentium III, GeForce 3, Win98 SE Period-Correct Build Log
- Local Video-Gen on 12GB: What an RTX 3060 Does in the Gemini Omni Flash Era
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- Best PC Game Controller in 2026
- Best 4K Gaming Monitor in 2026: 5 Picks From Budget to Premium
- Building a Voodoo 2 SLI Windows 98 Gaming Rig in 2026: Period-Correct Parts That Are Still Findable
- RTX 5090 Prebuilt vs a $700 RTX 3060 Local-LLM Box: What Extra VRAM Actually Buys
- Claude Fable 5 Burns 117k Tokens/Task: Can a Local RTX 3060 Keep Up?
- GeForce 6800 Ultra AGP Install Guide: Drivers, Benchmarks, and the Last Great AGP Card
- KDE KWin Gaming Patches 2026: Linux Latency vs Windows
- Qwen 3.6 35B-A3B on RTX 3060 12GB: Local LLM Throughput Guide (2026)
- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Best SSD for the Steam Deck and Handheld PCs (2026)
- Best CPU Cooling for AMD Ryzen Builds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090