Cooler Master
Cooler Master Force 500
Status: Cooler Master Force 500: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The Cooler Master Force 500: Top-mounted PSU bay accepts oversized and older ATX supplies without clearance conflicts; main trade-off: USB 3.0 is an internal header only, so it needs a compatible motherboard connector.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — an in-stock alternative:
Similar: Cooler Master MasterBox 500 PC Case - Mid-Tower… — $261.00 on Amazon as of 2026-10-06 10:23 UTC (price may vary).
Pros & Cons
Pros
- ✓ Top-mounted PSU bay accepts oversized and older ATX supplies without clearance conflicts
- ✓ Clears full-length flagship GPUs up to the dual-GPU Radeon HD 7990
- ✓ Large motherboard tray cutout lets you swap CPU coolers without pulling the board
- ✓ Steel body construction rather than the all-plastic shells common at this price
Cons
- ✗ USB 3.0 is an internal header only, so it needs a compatible motherboard connector
- ✗ Ships with no PSU, adding a separate purchase to the total build cost
- ✗ Midi tower footprint limits radiator and drive-cage expansion versus full towers
- ✗ Plain front panel design offers no tempered glass or RGB for showcase builds
Manufacturer description
Product DescriptionCooler Master Force 500 microATX, ATX Case-Classy and simplistic front panel design-USB 3.0 super speed port (internal)-Top mounted PSU slot for best PSU compatibility-Large tray cut-out for easy CPU cooler installation-Supports all High-End VGAs including the HD7990-Exposed 3.5” Slot for CardReaders-Tool-free system for ODDs, card reader and HDDs-VGA cooling vent with 120/140 mm fan support-HDD cooling vent with 2x120mm fan support-Supports up to 6 fans in total (1 pre-installed)Manufacturer's DescriptionThe ZipWall Dust Barrier System can be set up by one person in…
SpecPicks Verdict
SpecPicks scored Cooler Master Force 500 using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Cooler Master's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Classy and simplistic front panel design
- USB 3.0 super speed port (internal)
- Top mounted PSU slot for best PSU compatibility
- Large tray cut-out for easy CPU cooler installation
- Supports all High-End VGAs including the HD7990
Full Specifications
| Brand | Cooler Master |
|---|---|
| Color | Force 500 |
| Material | Steel with Plastic |
| Case Type | Midi Tower |
| Model Name | Force 500 |
| Connectivity | USB |
| Model Number | FOR-500-KKN1 |
| Cooling Method | Air |
| Number of Fans | 6 |
| Mfr Part Number | FOR-500-KKN1 |
| Total Usb Ports | 3 |
| Item Part Number | FOR-500-KKN1 |
| Compatible Devices | Computer Case |
| Enclosure Material | Steel with Plastic |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 2 |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | ATX |
| Internal Bays Quantity | 7 |
| Motherboard Compatability | ATX |
| Full listing title | Cooler Master Force 500, No PSU - Black Midi Tower/ATX, FOR-500-KKN1 (Midi Tower/ATX Chassis: Steel Body, Plastic) |
Ready to buy?
Amazon shows no buyable offer for Cooler Master Force 500 at the last check. A similar in-stock product is Cooler Master MasterBox 500 PC Case - Mid-Tower…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- Best Sim Racing Wheel and Shifter for Beginners in 2026
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Best Wireless Streaming Microphones for Twitch in 2026
- Claude Fable 5 Tops the Intelligence Index: What Frontier Cloud AI Means for Local Rig Builders
- KOORUI 27" 4K QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Gaming Monitor Wins?
- Asus RTX 5060 Near-MSRP Deal Has Expired
- Best Local LLM Parts to Buy Before the 2026 Memory Spike
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Ryzen 5 5600G vs RTX 3060 12GB for Entry Local LLM Inference (2026)
- How to run DeepSeek-R1 32B on Apple M4 Pro
- Best Webcam for PC Game Streaming Under $100 (2026)
- Why NVIDIA Killed 3dfx: How the Voodoo Brand Still Haunts Modern GPU Launches
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- Best Wheel and Controller for Truck and Farm Sims in 2026
- Jellyfin on Raspberry Pi 4 8GB with an SSD (2026 Guide)
- Mac Studio AI Model 2025: Performance vs AMD Alternatives
- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- UT99 OldUnreal 469 Patch in 2026: Migrate Configs, Rejoin Modern Servers, and Tune Mouse Precision
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- Samsung Winds Down Chip Production Six Days Before Strike: What Memory Buyers Should Do Right Now
- Best Budget SATA SSD for Everyday Upgrades (2026)
- Best SSD for a Local LLM Workstation: NVMe vs SATA Model-Load Latency Tested
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090