Skip to main content
Audiotek - Output 12A Amp Mobile 13.8 Volt DC Power Supply AT-PS12
AUDIOTEK

Audiotek - Output 12A Amp Mobile 13.8 Volt DC Power Supply AT-PS12

Bottom line: The AUDIOTEK Output 12A Amp Mobile 13.8 Volt DC Power Supply AT-PS12: Regulated 13.8V DC output, the standard nominal voltage for 12V mobile radio gear; main trade-off: 12A limit rules out high-power HF rigs and large car amps needing more current.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Regulated 13.8V DC output, the standard nominal voltage for 12V mobile radio gear
  • ✓ 12A rated output covers CB radios, scanners and lower-draw HAM transceivers
  • ✓ Short circuit fuse protection guards connected equipment against wiring faults
  • ✓ Screw terminal connectors accept bare wire leads without extra adapters
  • ✓ Runs 12V car audio and accessories indoors from a standard 110V wall outlet

Cons

  • ✗ 12A limit rules out high-power HF rigs and large car amps needing more current
  • ✗ 110V input only; no 220-240V setting listed for use outside North America
  • ✗ Fixed 13.8V output with no adjustable voltage or current limit
  • ✗ No built-in voltmeter or ammeter listed for monitoring the load

Manufacturer description

Ideal for Home, Office, Installers :: Perfect for any 12 Volt Equipment :: Screw Terminal Connectors :: Short Circuit Fuse Protection & Heavy duty work!

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for AUDIOTEK Output 12A Amp Mobile 13.8 Volt DC Power Supply AT-PS12, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "Regulated 13.8V DC output, the standard nominal voltage for 12V mobile radio gear"; the main trade-off is "12A limit rules out high-power HF rigs and large car amps needing more current". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 12 AMP DC Regulated Power Supply
  • 110V Input
  • 13.8V Output
  • Easy to use with Short Circuit protection
  • Powers Cellular Phones, 12V DC CB Radios, Scanners, HAM Radios, Auto Sound Systems

Full Specifications

BrandAUDIOTEK
Colorblack
Form FactorFlex ATX
Model NumberAT-PS12
Connector Typescrew
Output Current12 A
Output Voltage13.8 volts
Output Wattage165.6 watts
Item Dimensions5.5 x 9 x 4 inches
Mfr Part NumberAT-PS12
Connector Type Used on Cablescrew

Ready to buy?

Audiotek - Output 12A Amp Mobile 13.8 Volt DC Power Supply AT-PS12 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →