Skip to main content
DC Power Supply Variable, Bench Power Supply with Encoder Adjustment Knob, Output Enable/Disable Button, Adjustable Power Supplies with USB Quick-Charge, Short Circuit Alam (30V 10A Black)
NANKADF

NANKADF DC Power Supply Variable

Bottom line: The NANKADF DC Power Supply Variable ($40.84 on Amazon as of 2026-11-20 17:28 UTC): Encoder knob sets each digit 0-9 by press-and-turn, not a coarse potentiometer sweep; main trade-off: 30V/10A ceiling rules out higher-voltage tube, EV, or industrial bench work.

$40.84 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Encoder knob sets each digit 0-9 by press-and-turn, not a coarse potentiometer sweep
  • ✓ 4-digit display resolves 0.01 V and 0.001 A for fine bench measurements
  • ✓ Output enable/disable button commits preset values instead of live-adjusting into a load
  • ✓ OCP cuts output and sounds a buzzer alarm on a load short circuit
  • ✓ Built-in 18W USB quick-charge port powers phones and repaired devices

Cons

  • ✗ 30V/10A ceiling rules out higher-voltage tube, EV, or industrial bench work
  • ✗ No stated remote sense, serial, or PC-control interface in the listed features
  • ✗ Single output rail, so dual-supply or split-rail testing needs a second unit
  • ✗ Buzzer alarm is the only OCP alert; no logging or fault history described

Manufacturer description

The NANKADF 30V 10A bench power supply gives you fine-grained control over your workbench without the fiddly potentiometers found on budget units. Its high-precision encoder knob lets you press to select a digit and turn to dial it from 0-9, so you land on the exact voltage or current you need instead of hunting for it. A 4-digit LED display reads voltage to 0.01 V and current to 0.001 A, with automatic constant-voltage and constant-current switching and a status indicator that tells you which mode you're in at a glance. Screen brightness is adjustable for dim or bright shops. The dedicated…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for NANKADF DC Power Supply Variable, so this read rests on the manufacturer's listed specs and the current price in the power supplies category (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "Encoder knob sets each digit 0-9 by press-and-turn, not a coarse potentiometer sweep"; the main trade-off is "30V/10A ceiling rules out higher-voltage tube, EV, or industrial bench work". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What voltage and current range does this power supply cover?

This is the 30V 10A black model, adjustable across that range with a 4-digit display accurate to 0.01 V and 0.001 A.

How precisely can I set the voltage and current?

The encoder knob lets you press to move between digits and turn to set each one from 0 to 9, so you dial in an exact value rather than sweeping a potentiometer. Readout resolution is 0.01 V and 0.001 A.

Does it protect my circuit if something shorts out?

Yes. With overcurrent protection enabled, a short in the connected load automatically stops the output and triggers a buzzer alarm, protecting both the supply and the load.

Can I set values before power reaches my project?

Yes. The Output enable/disable button turns the output on and off independently, so you can dial in voltage and current first, then press once to apply power to your load.

Does it switch between constant voltage and constant current automatically?

Yes, the supply switches between C.V. and C.C. modes automatically and shows the active mode on the working status indicator on the display.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • High-precision Encoder Knob: Different from general knobs, this DC power supply has a precise encoder knob. You can press the knob to switch each digit, and then turn the knob to customize each digit in the range of 0-9. Set the voltage or current you want more accurately.
  • Output Enable/Disable Button: In the process of using the bench power supply, Output button can prevent us from forgetting to turn off the output and causing damage to the load. Just press this button to turn on or turn off the output of the power supply. This makes it more convenient for you to use the variable power supply.
  • Overcurrent Protection: When the OCP function is turned on, if the load equipment is short-circuited during operation, the adjustable power supply will automatically stop output and send a buzzer to alert the user. Protect the adjustable power supply and load from damage.
  • Precise 4-digit LED Display: The dc power supply is equipped with a high-definition 4-digit display with data accurate to 0.01 V and 0.001 A. It has constant voltage (C.V.) and constant current (C.C.) modes, which can be switched automatically. You can see the working status indicator on the display. Additionally, you can adjust the brightness of the screen according to your needs.
  • USB Fast Charging Port: The variable power supply is configured with an 18W fast charging port. No more mplaining about mobile phones or repaired devices not being charged in time. The NANKADF dc power supply allows you to avoid this dilemma. It charges your devices quickly anytime, anywhere.

Full Specifications

BrandNANKADF
Wattage100 watts
Model Name30V 10A BLACK
Unit Count1 Count
Form FactorCompact
ConnectivityUSB
Model Number30V 10A BLACK
CompatibilitySwitch
Built-In MediaDC POWER SUPPLY,Output cable, power cord, manual
Connector Typeusb
Cooling MethodAir
Output Wattage300
Item Dimensions7.87 x 0.35 x 0.57 inches
Mfr Part NumberNPY2
Number of Items1
Number of Packs1
Compatible DevicesPersonal Computer
Warranty Description1
Maximum Input Voltage115 volts
Minimum Input Voltage115 volts
Full listing titleDC Power Supply Variable, Bench Power Supply with Encoder Adjustment Knob, Output Enable/Disable Button, Adjustable Power Supplies with USB Quick-Charge, Short Circuit Alam (30V 10A Black)

Ready to buy?

DC Power Supply Variable, Bench Power Supply with Encoder Adjustment Knob, Output Enable/Disable Button, Adjustable Power Supplies with USB Quick-Charge, Short Circuit Alam (30V 10A Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $40.84

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Power Supplies

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →