Systor 1:1 HDD/SSD Hard Drive Duplicator
Bottom line: Per its Amazon listing, the Systor 1:1 HDD/SSD Hard Drive Duplicator: COMPATIBILITY : Fits both 3.5" and 2.5" hard drives without the need of an adapter.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ COMPLETE STANDALONE : No computer or software required
- ✓ Backed by Systor's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Systor 1:1 HDD/SSD Hard Drive Duplicator, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the ssds & storage category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- COMPLETE STANDALONE : No computer or software required
- WARRANTY: 1 year parts, 3 years labor, lifetime technical support
- COMPATIBILITY : Fits both 3.5" and 2.5" hard drives without the need of an adapter
- TRANSFER RATE : Copy multiple hard disk drives or solid state drives simultaneously at speeds up to 90MB per second (5.4GB per minute); copy speed will remain the same even if the number of load is increased
- DUPLICATION & SANITIZATION: Copy systems and files (data only) or whole hard drive; erase hard disk drives or solid state drives, compliant to DoD 5220.22-M data sanitization
Full Specifications
| Brand | Systor |
|---|---|
| Color | Dual Port/Hot Swap |
| WARRANTY | 1 year parts, 3 years labor, lifetime technical support |
| Form Factor | 2.5-inch, 3.5-inch |
| Media Speed | 90 |
| Model Number | SYS101HS-DP |
| COMPATIBILITY | Fits both 3.5" and 2.5" hard drives without the need of an adapter |
| Built-In Media | HDD/SSD Duplicator |
| Item Type Name | 1:1 SATA 2.5" & 3.5" Dual Port/Hot Swap Hard Disk Drive / Solid State Drive (HDD/SSD) Clone Duplicator/Sanitizer (90MB/s) |
| Mfr Part Number | SYS101HS-DP |
| Number of Items | 1 |
| Special Feature | Hot Swappable |
| Hardware Platform | Universal |
| Compatible Devices | 2.5\/3.5\u201d SATA HDDs and SSDs |
| Data Transfer Rate | 90 megabytes_per_second |
| Enclosure Material | Metal |
| Additional Features | Hot Swappable |
| COMPLETE STANDALONE | No computer or software required |
| Hard Disk Interface | Serial ATA |
| Warranty Description | 3 years labor, 1 year parts warranty and lifetime technical support. |
| Full listing title | Systor 1:1 HDD/SSD Hard Drive Duplicator - up to 5.4GB/Min - SYS101HS-DP | Supports 2.5" Solid State Drives & 3.5" SATA Hard Drives, Standalone Duplicator, Eraser & Sanitizer, 90MB/Sec Drive Copy |
Ready to buy?
Systor 1:1 HDD/SSD Hard Drive Duplicator - up to 5.4GB/Min - SYS101HS-DP | Supports 2.5" Solid State Drives & 3.5" SATA Hard Drives, Standalone Duplicator, Eraser & Sanitizer, 90MB/Sec Drive Copy is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best PC Cooling Fans for High-Airflow Gaming PCs in 2026
- FIDECO vs Unitek SATA/IDE-to-USB Adapters: Imaging and Rescuing Vintage Drives in 2026
- Best GPU Upgrade From a GTX 1050 Ti for Local LLMs in 2026
- Benchmarking Open Models for Agentic Tool Use on an RTX 3060
- Best Gaming Monitor for Console + PC Dual Setup in 2026
- NVIDIA GeForce GTX 10 Pascal GPUs: 10th Anniversary
- Best CPU Coolers for Ryzen & Intel Gaming Builds in 2026
- Why AI Memory Bandwidth Matters: From Micron's HBM to Your GDDR6
- Build a RetroPie Arcade on a Raspberry Pi 4 8GB in 2026
- RTX 5090 vs RTX 4090 at 1080p Esports: Does the Flagship Help? (Nov 2026)
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- The Half-Life Mod Era That Built Modern Multiplayer: Counter-Strike, Day of Defeat, TFC, Natural Selection
- ViewSonic VX2730D-4K Review: 4K Gaming at 163 PPI and 144Hz
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- Aider vs Cline vs Continue.dev on a Local RTX 3060 (2026)
- Microsoft Now Points to 32GB RAM for Windows 11 Gaming
- Ryzen 7 5800X3D vs Core i7-14700K: DDR4's Last Big Fight
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5080
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- gpt-oss 20B: RTX 3060 12GB vs Ryzen 5 5600G CPU-Only (2026)
- Asus ROG Xreal R1 AR glasses pre-orders start today at $849 — 240 Hz virtual gaming at 171 inches on PC…
- Best CPU Coolers for AMD Ryzen in 2026: 5 Picks Ranked
- Can a 12GB RTX 3060 Still Run 2026's Local LLMs?
- Run a Local Coding Agent on an RTX 3060 12GB (After Codex Went Autonomous)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090