Skip to main content
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
Thermaltake

Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A

Bottom line: The Thermaltake Pacific DIY OD 16mm: Mandrels for 45, 90, 180 and 360 degree bends cover most loop routing; main trade-off: sized only for 16mm OD tube - useless for 12mm or 14mm loops.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar cooling & fans

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Mandrels for 45, 90, 180 and 360 degree bends cover most loop routing
  • ✓ 16mm OD / 12mm ID sizing matches standard PETG hard-tube builds
  • ✓ Included pipe cutter leaves a beveled edge, no separate deburring tool
  • ✓ Silicone insert holds tube shape and stops kinks mid-bend
  • ✓ Pre-drilled mandrel holes let you bolt the set to a workbench

Cons

  • ✗ Sized only for 16mm OD tube - useless for 12mm or 14mm loops
  • ✗ PETG-focused; acrylic and copper tube need different technique
  • ✗ No heat gun included, so budget for one before your first bend
  • ✗ Soapy water is required for tube insertion, adding a messy prep step

Manufacturer description

BendingCL-W093-AL00BL-A B01BX3EZUIProduct description:Thermaltake introduces an essential tool for PETG users, the Pacific Hard Tube Bending Kit. Designed for users looking to create bends using 16mm PETG tube, each kit contains Mandrels for 360 Degree, 180 Degree, 90 Degree and 45 Degree bends. Silicone insert supports tube during the bending process to prevent kinks and promotes smooth bends while keeping inner tube wall structure. Finish up your masterpiece with the professional Thermaltake pipe cutter for a near perfect beveled cut every time. Each mandrel is designed to be mounted to a…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water… using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. Thermaltake's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
  • Mandrels: Includes Mandrels for 45/90/180/360 degree bends
  • Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
  • Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
  • Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
  • Recommended use of soapy water assists with tube insertion and tube heating

Full Specifications

BrandThermaltake
ModelCL-W093-AL00BL-A
InsertSilicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
Voltage12 volts
MandrelsIncludes Mandrels for 45/90/180/360 degree bends
MaterialSilicone
MountingPre-drilled holes allow easy mounting of mandrels to flat surface
Unit Count1 Count
Part NumberCL-W093-AL00BL-A
Pipe CutterProfessional Grade Pip Cutter provides perfect beveled edge cuts
Material TypeSilicone
Cooling MethodLiquid
Number of Items6
Compatible DevicesRadiator, Desktop, Graphic Cards
Near Perfect BendsEssential for making precise bends when using 16mm OD PETG tube
Included Componentstube ebending kit
Power Connector Type4-Pin
Warranty Description2 years
Item Dimensions L x W x H11.2"L x 2.1"W x 8"H
Global Trade Identification Number00841163063149

Ready to buy?

Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Cooling & Fans

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
View on Amazon →