iUniker Case for Raspberry Pi 4
Bottom line: The iUniker Case for Raspberry Pi 4 ($9.99 on Amazon as of 2026-11-20 23:17 UTC): Complete kit: 4010 fan, 4 aluminum heatsinks, screws, rubber feet, screwdriver included; main trade-off: fits only Raspberry Pi 4 Model B, not Pi 3, Pi 5, or Zero.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Complete kit: 4010 fan, 4 aluminum heatsinks, screws, rubber feet, screwdriver included
- ✓ Snap-on top cover exposes GPIO without unmounting the board
- ✓ Port cutouts match Pi 4 layout: USB-C, micro-HDMI, Ethernet, camera, display
- ✓ Fan can run off a lower-voltage pin for quieter operation
Cons
- ✗ Fits only Raspberry Pi 4 Model B, not Pi 3, Pi 5, or Zero
- ✗ ABS plastic shell, not aluminum or passive-cooling metal
- ✗ 40mm fans are audible at full 5V in quiet rooms
- ✗ Thick ribbon cables and stacked GPIO jumpers may not route cleanly
Manufacturer description
You get the ABS shell, a 4010 40mm cooling fan, four aluminum heatsinks, mounting screws, rubber feet, and a screwdriver, so there is no second order for cooling hardware before your first boot. The active fan plus heatsink set helps pull heat away during media center playback, home server duty, classroom builds, and light robotics work. If fan noise bothers you, you can wire it to a lower-voltage pin and trade some airflow for quiet. The snap-on top cover lifts off on its own, so you can reach the GPIO header for testing or a new sensor without unscrewing the board from the case. Port…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for iUniker Case for Raspberry Pi 4, so this read rests on the manufacturer's listed specs and the current price in the pc cases category (how we evaluate). Compare with similarly-priced alternatives in the pc cases category before committing. On the listing's own facts, the case for it is "Complete kit: 4010 fan, 4 aluminum heatsinks, screws, rubber feet, screwdriver included"; the main trade-off is "Fits only Raspberry Pi 4 Model B, not Pi 3, Pi 5, or Zero". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this case fit the Raspberry Pi 5?
No. It is designed for the Raspberry Pi 4 Model B / 4B port layout only, including USB-C power and micro-HDMI cutouts. Check the listing before pairing it with any other Pi generation.
Do I need to buy a fan or heatsinks separately?
No. The kit includes a 4010 cooling fan, four aluminum heatsinks, screws, rubber feet, and a screwdriver, so you have the cooling and mounting hardware in one purchase.
Is the fan loud?
A 40mm fan is audible at full voltage. iUniker notes you can connect the fan to a lower-voltage GPIO pin instead, which reduces noise at the cost of some airflow.
Can I get to the GPIO pins with the case closed?
The top cover is removable on its own, so you can reach the GPIO area without pulling the Pi board out of the case. That suits breadboard testing and classroom projects.
Will my camera ribbon cable fit?
There are openings for the camera and display connectors, but iUniker advises checking cable thickness and routing first, especially with ribbon cables or multiple GPIO jumpers.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【All-in-One Raspberry Pi 4 Case Kit】Designed for Raspberry Pi 4 Model B / 4B, this ABS case includes a 4010 cooling fan, 4 aluminum heatsinks, screws, rubber feet, and screwdriver, so beginners do not need to buy cooling parts or mounting hardware separately.
- 【Active Cooling for Daily Pi 4 Projects】The included 40mm fan and heatsinks help reduce heat during media center use, home server projects, classroom builds, and light robotics. For quieter operation, users may connect the fan to a lower-voltage pin depending on their cooling needs and setup.
- 【Removable Top Cover for GPIO Access】The simple snap-on top cover allows access to the GPIO area without fully removing the Raspberry Pi board from the case, useful for testing, learning, and maker projects where occasional pin access is needed.
- 【Durable ABS Protection】The sturdy plastic shell helps protect your Raspberry Pi 4 from dust, scratches, and everyday handling, making it suitable for students, classrooms, desktops, basic robotics projects, and DIY electronics work.
- 【Designed for Raspberry Pi 4 Port Layout】Openings are made for the Pi 4’s USB-C power, micro-HDMI, USB, Ethernet, GPIO, camera, and display areas. For best results, check your cable thickness and routing needs before installation, especially when using ribbon cables or multiple GPIO jumpers.
Full Specifications
| Brand | iUniker |
|---|---|
| Color | Black With Large Fan |
| Fan Size | 40 millimeters |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Case Type | Raspberry Pi |
| Model Name | Raspberry Pi 4 |
| Connectivity | USB-C |
| Model Number | IU-RP-045-4B |
| Cooling Method | Air |
| Number of Fans | 4 |
| Mfr Part Number | IU-RP-045-01-CB |
| Total Usb Ports | 2 |
| Antenna Location | Gaming |
| Compatible Devices | Raspberry Pi 4 Model B |
| Enclosure Material | Acrylonitrile Butadiene Styrene (ABS) |
| Total USB 2.0 Ports | 2 |
| Warranty Description | 1 Year Manufacture |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | Mini ITX |
| Item Dimensions D x W x H | 4.72"D x 1.57"W x 2.36"H |
| Full listing title | iUniker Case for Raspberry Pi 4, ABS Pi 4 Case with Cooling Fan, Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B |
Ready to buy?
iUniker Case for Raspberry Pi 4, ABS Pi 4 Case with Cooling Fan, Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related PC Cases
iUniker Case for Raspberry Pi 4 head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU Cooler for Ryzen 9 3900X Overclocking in 2026
- Best PCI Serial and IDE Adapters for Retro PCs in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
- Raspberry Pi Projects for Teens: Best Builds 2026
- Microsoft's Copilot Super App vs a Local RTX 3060 Ollama Box in 2026
- Microsoft Now Recommends 32GB RAM for Gaming in 2026
- Intel Core Ultra 7 270K Plus: Dual-Channel Memory Scaling Tested
- Best Used Ryzen CPU for Budget AM4 Gaming Upgrades in 2026
- Best SSD for Expanding Your Steam Library in 2026: SATA Value Picks
- Which Open LLMs Actually Handle Tool-Calling on an RTX 3060?
- Why Privacy-Preserving AI Demand Is Rising in the LLM Era
- Adafruit Ships a Triple LED Matrix Bonnet for the Raspberry Pi
- Sound Blaster Live! Restoration Guide: Period-Correct Audigy FX Bridge for Win98 Builds
- Free Retro Game Emulators: Best Picks for 2026
- Build a Pi Zero W Retro Handheld in 2026: Full Parts List and Setup
- GPT-5.5 Instant Shipped: What an RTX 3060 12GB Local Stack Covers When OpenAI Retires a Model
- CompactFlash vs SATA-to-IDE: The Best Silent Boot Drive for a Win98 PC
- Imaging a 1998 IDE Drive and Letting an LLM Rebuild Win98
- Best Budget 1080p Gaming PC Parts in 2026: 5 Picks
- Raspberry Pi 4 8GB vs Pi 5 vs Mini-PC for Local LLMs
- How to Identify Your Motherboard: A Step-by-Step Guide
- DwarfStar Distributed Inference: Splitting a Single LLM Across a Home LAN of Mismatched GPUs
- Handheld Gaming PC Sale: Best 2026 Deals to Buy Now
- Best GPU for 1440p 144Hz Esports in 2026: RTX 3060 Ventus Sweet Spot
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090