WELLUCK 1.5FT 3 Prong to 4 Prong Dryer Adapter
Bottom line: The WELLUCK 1.5FT 3 Prong to 4 Prong Dryer Adapter: Converts NEMA 14-30P wall outlet to 10-30R for 3-prong dryers; main trade-off: only 1.5FT long, so the dryer must sit near the outlet.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Converts NEMA 14-30P wall outlet to 10-30R for 3-prong dryers
- ✓ 10 AWG all-copper wire rated for the full 30A load
- ✓ Molded right-angle ends sit flush and bend 180 degrees
- ✓ Handles 250V and up to 7500 watts, matching standard dryers
Cons
- ✗ Only 1.5FT long, so the dryer must sit near the outlet
- ✗ Does not add a separate ground path like a true 4-wire cord
- ✗ Male-to-male style setup can look confusing on first install
- ✗ 30A ceiling means it will not serve higher-draw appliances
Manufacturer description
The WELLUCK 1.5FT 3 Prong to 4 Prong Dryer Adapter solves a specific, annoying problem: your older clothes dryer ends in a 3-prong NEMA 10-30P cord, but the laundry room wall gives you a modern 4-slot receptacle. Instead of replacing the dryer or paying an electrician to swap the cord, this adapter converts the connection in seconds. It runs a NEMA 14-30P male plug to a 10-30R female receptacle, rated 30A at 125V/250V and a maximum of 7500 watts. Inside the 1.5-foot cord is 10 AWG all-copper wire, sized to carry the full 30 amp load rather than a thinner aluminum substitute. Both ends use…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WELLUCK 1.5FT 3 Prong to 4 Prong Dryer Adapter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "Converts NEMA 14-30P wall outlet to 10-30R for 3-prong dryers"; the main trade-off is "Only 1.5FT long, so the dryer must sit near the outlet". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this let me plug my old 3-prong dryer into a 4-prong outlet?
Yes. It goes from a NEMA 14-30P male plug into your 4-slot wall receptacle and gives you a 10-30R female receptacle for the dryer's 3-prong cord.
What amperage and voltage does it support?
It is rated 30 amps at 125V/250V, with a stated maximum of 7500 watts, which covers standard residential electric dryers.
What gauge wire is inside?
10 AWG copper conductors throughout. WELLUCK lists it as approved for all copper wire and rated to support a 30 amp maximum load.
How long is the adapter cord?
1.5 feet. The short length keeps the dryer close to the outlet, but the molded right-angle ends let the cord bend up to 180 degrees to fit tight gaps.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Convert Old Dryer from 3 to 4】: WELLUCK dryer plug adapter 3 to 4 prong outlet can connect your 3 pole plug on your dryer to the 4-slot wall outlet, it is a smart and direcrt Male to Male eletrical solution.
- 【Cost and Time Saving】:Buy a new Dryer? Hire an Electrician? Unmatched Plug and Old Dryer Outlet? This dryer adapter 3prong to 4 prong is the most effective and economical solution. Solve your issue just in seconds.
- 【Flexiblity】: Come with longer and wide extension 4 prong dryer cord that plug in or pull out plugs/sockets easily. And the cord can be bent 180 degrees from male to female flexibly. Molded right Angle Plug and Receptacle come with easy grip design.
- 【Qualified Wire】:Approved for all copper wire.Each 10 AWG copper inner wire inside, support max 30 Amp overload.
- 【What You Will Get】: 1.5FT dryer adapter 3 prong to 4 prong with approved cable and connectors, NEMA 14-30P to 10-30R, 125V/250V, 30 AMP Max, Max 7500 watts.
Full Specifications
| Brand | WELLUCK |
|---|---|
| Color | Black |
| Gauge | 10 |
| Voltage | 250 volts |
| Wattage | 2250 watts |
| Amperage | 30 A |
| Plug Type | Type NEMA 10-30P to NEMA 14-30R |
| Unit Count | 1 Count |
| Item Length | 1.5 feet |
| Plug Format | Type NEMA 10-30P to NEMA 14-30R |
| Model Number | PL0018 |
| Input Current | 30 A |
| Mfr Part Number | 0307362 |
| Connector Gender | Male-to-Female |
| Special Features | flexibility |
| Number of Outlets | 1 |
| Case Material Type | heavy duty marine grade materials |
| Number Of Conductors | 3 |
| Power Cord Prong Count | 4 |
| Full listing title | WELLUCK 1.5FT 3 Prong to 4 Prong Dryer Adapter, 3 to 4 Prong Dryer Plug Adapter, 4 Prone Dryer Outlet Adapter, 14-30P Male to 10-30R Female Receptacle for Old Clothes Dryer Converter, 30A, 250V |
Ready to buy?
WELLUCK 1.5FT 3 Prong to 4 Prong Dryer Adapter, 3 to 4 Prong Dryer Plug Adapter, 4 Prone Dryer Outlet Adapter, 14-30P Male to 10-30R Female Receptacle for Old Clothes Dryer Converter, 30A, 250V is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Streaming Microphone for Twitch in 2026
- Best 2.5" SATA SSD to Upgrade a PS4 Pro in 2026
- Modder Runs a Counter-Strike Clone at 60 FPS on the Original PSP
- Claude Code + Fable 5 Ported Command & Conquer to iOS in Hours: What Local Coding Rigs Need
- Best CPU Coolers for High-TDP Gaming Builds in 2026
- Qwen 3.6 27B on a 12GB RTX 3060: Which Quant Actually Fits?
- Best GPU for Qwen3 30B-A3B: What the 3B Active Path Really Needs
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Game Streaming in 2026
- MiniMax-M3 Scores 55 on AA Index: Can You Self-Host It?
- The Budget Streaming Starter Kit: Mic, Light, and Webcam Under $250
- Microsoft Mirage and Persistent-Memory Video Gen: How Much VRAM You Actually Need
- Best Raspberry Pi 5 Starter Kits and Accessories for Home Lab Builds (2026)
- Can You Game While Ollama Runs? RTX 3060 12GB VRAM Contention
- Ex-Sega Engineer's 'Super Realistic' CRT Emulator — What It Means for Retro Mini-Consoles
- Sound Blaster on a Retro Gaming PC: Period-Correct Audio and the Modern G6 Bridge
- Best PC Gaming Upgrades Under $30 in 2026
- 8BitDo Sn30 Pro vs Pro 2: Best Bluetooth Controller for Raspberry Pi 4 Emulation
- Crucial BX500 vs Samsung 870 EVO vs SanDisk SSD Plus: Best Budget SATA SSD
- Best Budget NVMe SSD for a Big Steam Library: WD Blue SN550 vs SATA
- Ryzen 5 5600G vs Ryzen 7 5800X for a 24/7 Ollama Box
- Ryzen 7 5800X vs Intel Core i7-9700K for 1080p Gaming in 2026: Which Budget Chip Wins?
- Orange Pi 4 Pro 12GB vs Raspberry Pi 4 8GB for Small Local LLMs (2026)
- Best Wireless Gaming Controllers for PC and Console in 2026
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090