EZDIY-FAB
EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow Female to Male Power Supply/Power Adapter for Computer Motherboard -1 Pack
Bottom line: The EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow: Right-angle turn clears side panels in short and SFF cases where a straight 24-pin will not fit; main trade-off: adds roughly an inch of depth behind the connector, so ultra-tight clearances can get worse not bett.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Right-angle turn clears side panels in short and SFF cases where a straight 24-pin will not fit
- ✓ Removes bending stress from the motherboard 24-pin header on long-term builds
- ✓ Works with any ATX board and PSU using a standard 24-pin main power connector
- ✓ 5V 3-pin ARGB header plugs into standard addressable lighting, no separate controller
Cons
- ✗ Adds roughly an inch of depth behind the connector, so ultra-tight clearances can get worse not bett
- ✗ Needs a free 5V 3-pin ARGB header on the board or the lighting does nothing
- ✗ Rainbow cycle only - color and effect depend on your board's ARGB software, not the adapter
Manufacturer description
The EZDIY-FAB ATX 24-pin 90 degree power connector solves a problem most builders only discover after the motherboard is already mounted: a stiff 24-pin PSU cable that refuses to bend inside a short or compact chassis. This EZDIY-FAB adapter sits between your PSU cable and the board, redirecting the run from vertical to horizontal so the cable clears a side panel or a cramped SFF layout. The right-angle geometry also takes bending load off the motherboard's 24-pin header, which matters on builds you plan to leave assembled for years. It works with any ATX motherboard and power supply using a…
SpecPicks Verdict
SpecPicks scored EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow… using a rating × review-volume × price-fit model applied to published specs and reviews across the motherboards category. EZDIY-FAB's motherboards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fit my motherboard?
It is listed as compatible with all ATX motherboards and power supplies that use a standard 24-pin main power connection. Measure the clearance behind your 24-pin header first, since the adapter adds depth before the turn.
Does it actually reduce strain on the 24-pin socket?
That is the stated purpose of the 90 degree design: it redirects the PSU cable so the cable's own stiffness does not press against the motherboard connector, which EZDIY-FAB positions as enabling long-term stable use.
How do I control the ARGB lighting?
It uses a 5V 3-pin ARGB connection, so it is driven by your motherboard's addressable RGB header and whatever lighting software that board ships with. The built-in effect is a rainbow color cycle.
Is installation complicated?
No. EZDIY-FAB describes it as plug and play: the female end takes your PSU's 24-pin cable, the male end goes into the motherboard, and the 3-pin lead goes to an ARGB header.
Key Features
- The ATX 24 Pin 90° Adapter is compatible with all ATX motherboards and power supply units that support a standard 24 pin main power connection.
- Built with the advanced ARGB lighting system , it features ARGB Rainbow color that glows attractively without straining your eyes .
- 90 Degrees right angle design, connecting between PSU 24 Pin Cable and motherboard connector, does not cause pressure on the motherboard connector for long-term stable use.
- ATX 24-pin female to male connector 90 degrees suitable for motherboard .Plug and play installation.
- This design will solve the PSU installation for the limited height chassis You can install the 24PIN power cable from vertical to horizontal direction with this adapter.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | Black |
| Unit Count | 1 Count |
| Model Number | EZDPI161 |
| Input Voltage | 5 Volts |
| Warranty Type | Limited |
| Connector Type | atx |
| Mfr Part Number | SG-24Pin ARGB Adapter |
| Number of Items | 1 |
| Number of Ports | 2 |
| Power Plug Type | Type A - 2 pin (North American) |
| Compatible Devices | Personal Computer |
| Smart Home Compatibility | Not Smart Home Compatible |
Ready to buy?
EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow Female to Male Power Supply/Power Adapter for Computer Motherboard -1 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Motherboards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Retro Gear Cables Melting Into Cases: Causes and Fixes
- 3dfx Voodoo5 5500 AGP tuning guide — 2026 edition
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 3090
- Qwen3.6-35B-A3B VRAM Optimization: Why Bigger Quants Win
- How Fast Is Local LLM Inference on a Ryzen 7 5800X (CPU-Only, No GPU)?
- Claude Sonnet 5: What Shipped and What It Means for Local Rigs
- Best NVMe SSD for Local LLM Model Storage in 2026
- Imaging Vintage IDE & SATA Drives in 2026: USB Adapters
- Best GPU for Forza Horizon 6 at 1080p & 1440p in 2026
- Best PC Cooling for High-TDP Builds in 2026
- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- Best Budget PC Gaming Peripherals and Desk Setup in 2026
- Resident Evil Code: Veronica on a CRT — Why It Still Hits Different
- SteamOS Boots on Intel Hardware: Enthusiast Hack Breaks AMD Lock-In
- Ollama vs llama.cpp for Qwen 3.6 27B on a 12GB RTX 3060
- Best DualSense Controllers and Adapters for PC in 2026
- RTX 3060 12GB in 2026: Is It Still a 1080p Value Champion?
- Meta's AI Bill Hits Billions: The Case for Local Inference on a $300 GPU
- Building a Period-Correct 2001 GeForce 3 Windows 98 SE Rig — With a CompactFlash Boot Drive
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
- Troubleshooting Sound Blaster Audigy FX Crackling and Driver Failures on WinXP (2026)
- RTX 4090 vs RTX 5090 for Local LLM Inference: 24 GB vs 32 GB (2026)
- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- Best Budget GPU for Local LLMs in 2026: RTX 3060 12GB vs the Alternatives
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090