GeeekPi Mini Tower Kit with QC3.0 Power Supply for Raspberry Pi 4
Bottom line: Per its Amazon listing, the GeeekPi Mini Tower Kit with QC3.0 Power Supply for Raspberry Pi 4: ICE Tower Cooler – The ICE Tower Cooler includes a 40mm PWM Fan.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ ICE Tower Cooler – The ICE Tower Cooler includes a 40mm PWM Fan
- ✓ Backed by GeeekPi's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for GeeekPi Mini Tower Kit with QC3.0 Power Supply for Raspberry Pi 4, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatibility – Only compatible with Raspberry Pi 4 Model B. For Pi 3B+/3B Version, please refer to ASIN: B0B81G6FPC; For Pi 4B Version without Power Supply, please refer to ASIN: B0B6V7XFJH;
- Access to All Ports – This Mini Tower Case is mainly made of ABS material and the two sides is made of transparent acrylic material. It’s access to USB-C power port, two Micro HDMI ports, 2 USB 3.0 ports, 2 USB 2.0 ports, Gigabit Ethernet port, SD card slot, GPIO port.
- With 0.96” OLED Screen Display – The screen was installed with screen holder on Mini Tower Case. The screen holder is easy to assemble or disassemble and the interior of the case includes a design for arranging cables, which is convenient for arranging cables. By programming the OLED screen, the contents shown on screen can be varied. It can display Raspberry Pi’s IP address, CPU temperature, Memory Status, Network Card Traffic and other system information. The screen driver board contains RGB three-color programmable LED ambient light, which can better render the light color according to your own needs.
- ICE Tower Cooler – The ICE Tower Cooler includes a 40mm PWM Fan. There are RGB three-color programmable LED moon lights on the screen driver board, and you can adjust the color of the light according to your own preferences. The lights on the ICE Tower Cooler will change with the lights on the driver board.
- Better Heat Dissipation – The ICE Tower Cooler is made from 5mm copper tube and 28 aluminum fins and it also has a 40mm cooling fan. All are good for heat dissipation of Raspberry Pi Board.
- NOTE: The RGB lights on Fan and mood lights on OLED screen driver board will not light up unless installed driver, and OLED will not display any information until you have enabled it! Please read the manual carefully and follow the steps to enable it. Package Includes: 1 x ABS Mini Tower Case, 1x QC3.0 Power Supply, 2 x Acrylic Side Panel,1 x 0.96 Inch OLED Display (already mounted on the case), 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in the package)
Full Specifications
| Brand | GeeekPi |
|---|---|
| Voltage | 5 volts |
| Wattage | 125 watts |
| Material | ABS, Acrylic |
| Unit Count | 1 Count |
| Part Number | K-0598 |
| Connectivity | USB-C |
| Material Type | ABS, Acrylic |
| Cooling Method | forced air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Raspberry Pi 4 Model B |
| Power Connector Type | 2-Pin |
| Warranty Description | 6 months |
| Full listing title | GeeekPi Mini Tower Kit with QC3.0 Power Supply for Raspberry Pi 4, Pi 4 Case with ICE Tower Cooler, 0.96'' OLED Module, RGB Fan, Heatsink, GPIO Expansion Board for Raspberry Pi 4 Model B |
Benchmark data for other processors
Ready to buy?
GeeekPi Mini Tower Kit with QC3.0 Power Supply for Raspberry Pi 4, Pi 4 Case with ICE Tower Cooler, 0.96'' OLED Module, RGB Fan, Heatsink, GPIO Expansion Board for Raspberry Pi 4 Model B is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSD to Upgrade Your PS4 Pro in 2026
- AMD Ryzen AI Halo Mini PC: Open-Source Power Analyzed
- Qwen3 Local: RTX 3060 12GB Build vs Mac Mini for Inference
- Best Standing Desk for a Dual-Monitor AI Workstation in 2026
- The Best Raspberry Pi Projects for Students in 2026 (With a Real Parts List)
- Mac Studio M3 Ultra vs RTX 5090 for AI Inference in 2026
- Best Controller for PC Emulation and Retro Gaming in 2026
- Best GPU for 1440p 144Hz Esports in 2026: RTX 3060 Ventus Sweet Spot
- Best Controller for Emulation and Retro Gaming on PC (2026)
- The Greatest GPU Awards: A Decade of Standout Cards
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5070
- pxpipe Cuts Claude Code Token Costs Up to 70%: How It Works, When to Go Local
- Kingston 2GB DDR Modules: Identifying and Buying RAM for a 2004-Era Retro PC
- Ryzen 7 5800X vs Ryzen 9 3900X: Mistral Small 24B Offload (2026)
- SNES Classic vs Sega Genesis Mini: Best Plug-and-Play Retro Console in 2026
- How We Use a Vision-LLM to Install Sound Blaster and Voodoo Drivers on Windows 98 — A Real Workflow From Our…
- Adafruit Ships a Triple LED Matrix Bonnet for the Raspberry Pi
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
- Voodoo5 5500 AGP Won't POST: Complete Troubleshooting Guide for 2026 Restorations
- Forza Horizon 6 on Steam Deck: Best Dock and Controller Setup for 2026
- RTX 5090 vs RTX 3090: Specs, Gaming & AI Compared (2026)
- KOORUI vs Samsung Odyssey: Best 27-inch 4K Gaming Monitor in 2026
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090