ARCTIC Alpine 17 - Intel CPU Cooler, 92 mm PWM Fan
Bottom line: The ARCTIC Alpine 17: Fits LGA1851 and LGA1700, covering current Intel desktop platforms; main trade-off: intel-only: no AMD AM4 or AM5 socket support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Fits LGA1851 and LGA1700, covering current Intel desktop platforms
- ✓ 68.2 mm install height clears most Mini-ITX, µATX and SFF cases
- ✓ 92 mm PWM fan with a wide speed range for motherboard fan control
- ✓ Pre-applied ARCTIC MX thermal paste, so no separate compound needed
- ✓ Pre-mounted push pins allow a quick, beginner-friendly install
Cons
- ✗ Intel-only: no AMD AM4 or AM5 socket support
- ✗ No support for older Intel sockets such as LGA1200 or LGA115x
- ✗ Small 92 mm fan and low heatsink leave less headroom than tower coolers
- ✗ Push-pin mounting is less rigid than a screw-in backplate design
Manufacturer description
The ARCTIC Alpine 17 is a compact Intel CPU cooler for builds where a tower cooler won't fit. It supports only the LGA1851 and LGA1700 sockets, so it suits current Intel desktop platforms. It stands just 68.2 mm tall, which lets it fit most all-in-one systems and small form factor cases, including Mini-ITX and µATX builds. Cooling comes from a 92 mm PWM fan with a wide speed range. Your motherboard can slow the fan at idle and speed it up under load, so you can choose between lower noise and more airflow. Below the fan, a Y-shaped fin design spreads heat across the heatsink, and the large…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ARCTIC Alpine 17, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Fits LGA1851 and LGA1700, covering current Intel desktop platforms"; the main trade-off is "Intel-only: no AMD AM4 or AM5 socket support". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Which CPU sockets does the ARCTIC Alpine 17 support?
The Alpine 17 works only with Intel LGA1851 and LGA1700 sockets. It does not support AMD sockets or older Intel sockets such as LGA1200 or LGA115x.
Will the Alpine 17 fit in a small form factor or Mini-ITX case?
In most cases, yes. Its installation height is 68.2 mm, so it fits most all-in-one systems and SFF cases, including Mini-ITX and µATX builds. Check your case's maximum CPU cooler height before you buy.
Do I need to buy thermal paste separately?
No. ARCTIC MX thermal paste comes pre-applied to the cooler's base. If you remove and remount the cooler later, clean off the old paste and apply fresh compound.
Can I control the fan speed?
Yes. The 92 mm fan is PWM-controlled and has a wide speed range. Connect it to your motherboard's CPU fan header, and the BIOS or fan software can adjust its speed to CPU temperature.
How hard is the Alpine 17 to install?
It is a simple install. The push pins come pre-mounted and the thermal paste is pre-applied, so you line the cooler up over an LGA1700 or LGA1851 socket and press the pins in. No separate backplate is needed.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- COMPATIBILITY: The ARCTIC Alpine 17 is a compact CPU cooler exclusively for the Intel sockets LGA1851 and LGA1700
- COMPACT: With an installation height of only 68.2 mm, the Alpine 17 is compatible with most all-in-one systems and SFF cases (Mini-ITX, µATX, etc.)
- EFFICIENT COOLING: The 92 mm fan can be controlled via PWM and provides the necessary flexibility and balanced cooling performance with its wide speed range
- GOOD HEAT DISTRIBUTION: The Y-shaped fin design ensures optimal heat distribution in the heatsink. Heat dissipation profits significantly from its large surface area and high airflow rate
- SIMPLE INSTALLATION: Pre-applied MX thermal paste and pre-mounted push pins allow effortless installation, even for beginners
Full Specifications
| Brand | ARCTIC |
|---|---|
| Model | ACALP00040A |
| COMPACT | With an installation height of only 68.2 mm, the Alpine 17 is compatible with most all-in-one systems and SFF cases (Mini-ITX, µATX, etc.) |
| Voltage | 12 volts |
| Material | Aluminum |
| Unit Count | 1 Count |
| Noise Level | 0.3 sones |
| Part Number | ACALP00040A |
| COMPATIBILITY | The ARCTIC Alpine 17 is a compact CPU cooler exclusively for the Intel sockets LGA1851 and LGA1700 |
| Material Type | Aluminum |
| Cooling Method | Air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Air Flow Capacity | 40 cfm |
| EFFICIENT COOLING | The 92 mm fan can be controlled via PWM and provides the necessary flexibility and balanced cooling performance with its wide speed range |
| Compatible Devices | 1700, Intel |
| Included Components | Alpine 17 |
| SIMPLE INSTALLATION | Pre-applied MX thermal paste and pre-mounted push pins allow effortless installation, even for beginners |
| Power Connector Type | 4-Pin |
| Warranty Description | 6 years |
Benchmark data for other processors
Ready to buy?
ARCTIC Alpine 17 - Intel CPU Cooler, 92 mm PWM Fan is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Local LLMs for Generating Interactive Textbooks On the Fly
- Ryzen 7 5800X3D vs Core i7-14700K: DDR4's Last Big Fight
- CRT Monitor vs TV for Retro Gaming: Which Actually Looks Right?
- Train a Kick Drum AI Model on 6GB VRAM (Linux Guide)
- Best Budget Streaming Starter Kit for Twitch & YouTube in 2026
- Intel Arc B580 LLM Inference: 12GB Battlemage Benchmarks
- Troubleshooting a Vintage WinXP Retro PC That Won't Boot: Driver Verifier, BIOS, and IDE Recovery
- Local LLM Setup in 2026: AMD GPU Guide by Model Size
- Voodoo5 5500 PCI Boots on Modern ASUS P8Z77-V Pro — A Look at Retro GPUs in 2026 Boards
- Best Controller for Sim Racing Beginners on PC in 2026
- How to Run a Public Website on a $10 ESP32 Without Servers
- When OpenAI Retires a Model: Build a Local RTX 3060 Hedge
- Llama 3.3 70B: Dual RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- GPT-5.6 Rollout Now Requires US Government Sign-Off, Customer by Customer
- ASUS ProArt PA27USD Lands: 27-Inch OLED Aims at Gaming
- Samsung Odyssey OLED G9 Drops $700 — and a Cheaper 4K Path
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs Cooler Master ML240L
- Qwen 3.6 35B GGUF: NTP vs MTP Quantization Explained
- Building a 2001 Pentium III + GeForce 3 Win98SE Gaming Rig: A 2026 Build Log
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- RTX 3060 12GB vs RTX 4060 for 1080p Gaming: Which Wins in 2026?
- Best Game Controller for PC and Console in 2026
- Is the Ryzen 7 5800X Still Worth It for 1440p Gaming in 2026?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090