ADATA SSD Legend 710 M.2 1TB PCIe Gen3 x4 M.2 2280 Solid State Drive
Bottom line: The ADATA SSD Legend 710 M.2 1TB PCIe Gen3 x4 M.2 2280 Solid State Drive: 2,400/1,800 MB/s sequential read/write over PCIe Gen3 x4 with NVMe 1.4; main trade-off: gen3 x4 ceiling of 2,400 MB/s trails Gen4 drives at similar 1TB pricing.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2,400/1,800 MB/s sequential read/write over PCIe Gen3 x4 with NVMe 1.4
- ✓ Bundled heat sink cuts drive temperatures roughly 15% under sustained load
- ✓ SLC caching plus Host Memory Buffer keeps burst writes fast without onboard DRAM
- ✓ AES 256-bit encryption and LDPC error correction built into the controller
Cons
- ✗ Gen3 x4 ceiling of 2,400 MB/s trails Gen4 drives at similar 1TB pricing
- ✗ Writes top out at 1,800 MB/s, below the 2,400 MB/s read figure
- ✗ HMB design borrows system RAM instead of using a dedicated DRAM cache
- ✗ M.2 2280 heat sink may foul GPU or cooler clearance in tight builds
Manufacturer description
The LEGEND 710 utilizes PCIe Gen3 x4 and NVMe 1.4 to deliver sustained read and write speeds of up to 2,400/1,800MB per second. It's M.2 2280 specification supports the latest Intel and AMD platforms, including desktop PCs and laptops.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ADATA SSD Legend 710 M.2 1TB PCIe Gen3 x4 M.2 2280 Solid State Drive, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the ssds & storage category before committing. On the listing's own facts, the case for it is "2,400/1,800 MB/s sequential read/write over PCIe Gen3 x4 with NVMe 1.4"; the main trade-off is "Gen3 x4 ceiling of 2,400 MB/s trails Gen4 drives at similar 1TB pricing". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- The LEGEND 710 utilizes PCIe Gen3 x4 and NVMe 1.4 to deliver sustained read and write speeds of up to 2,400/1,800MB per second.
- The heat sink works to keep temperatures down by 15% for optimal performance and stability.
- Equipped with SLC caching and HMB technology (Host Memory Buffer) for seamless productivity.
- With LDPC (Low Density Parity Check Code) and AES 256-bit encryption ensures accurate data transmissions and security.
- SSD ToolBox automatically ensures you have the latest firmware for optimal performance and allows for the monitoring of drive health and remaining life through Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) attributes.
Full Specifications
| Brand | ADATA |
|---|---|
| Color | Black |
| Model Name | Legend 710 |
| Read Speed | 2400 megabytes_per_second |
| Unit Count | 1 Count |
| Form Factor | M2 |
| Media Speed | 1600 megabits_per_second |
| Model Number | ALEG-710-1TCS |
| Built-In Media | SSD |
| Item Type Name | ALEG-710-1TCS |
| Hard-Drive Size | 1 TB |
| Mfr Part Number | ALEG-710-1TCS |
| Number of Items | 1 |
| Special Feature | 256-bit LDPC and AES encryption, PCIe Gen3 x4 interface, Supports host buffer (HMB) |
| Hardware Platform | Linux, Mac, PC |
| Installation Type | Internal Hard Drive |
| Compatible Devices | Laptop |
| Data Transfer Rate | 2400 megabits_per_second |
| Enclosure Material | 3D Nand |
| Additional Features | 256-bit LDPC and AES encryption, PCIe Gen3 x4 interface, Supports host buffer (HMB) |
| Full listing title | ADATA SSD Legend 710 M.2 1TB PCIe Gen3 x4 M.2 2280 Solid State Drive, Design for Creator Gaming, Read Speed up to 2,400 MB/s, 3D NAND, LDPC, AES 256-bit Encryption |
Ready to buy?
ADATA SSD Legend 710 M.2 1TB PCIe Gen3 x4 M.2 2280 Solid State Drive, Design for Creator Gaming, Read Speed up to 2,400 MB/s, 3D NAND, LDPC, AES 256-bit Encryption is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- How to run Qwen 3 14B on Arc B580
- Nintendo Switch Steering Wheel V2: A 3D-Printed Accessibility Controller
- Qwen3 0.6B: Raspberry Pi 4 8GB vs Ryzen 5 5600G for Tiny-Model Hosts (2026)
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- Best Nintendo Switch Accessories for Handheld and Docked Play in 2026
- Second Streaming PC vs NVENC: What an Old i7-9700K Is Still Good For
- RX 9060 XT vs RX 9070 XT: OLED 1440p or 4K IPS?
- Best GPU for Forza Horizon 6 at 1080p & 1440p in 2026
- OpenAI Launches ChatGPT Work: An Agent for Whole Workflows
- Intel Arc Pro B60 Gaming Guide: 24GB Battlemage in 2026
- RTX 4080M Desktop Build: 100W Gaming vs. RX 9070 GRE
- Best Gaming Monitor Under $400 in 2026: 5 Top Picks
- Local 13B LLM Inference on a $700 Used Build: Ryzen 7 3700X + RTX 3060 12GB Benchmarked
- Claude Code + Fable 5 Ported Command & Conquer to iOS in Hours: What Local Coding Rigs Need
- 21 GPU's benchmarked running a small TTS model (vram peak: 5GB)
- Why NVIDIA's New AI Servers Use Hot-Tub Coolant
- Best GPU for Local LLMs by VRAM: 2026 Reddit Consensus
- AOOSTAR MACO 6850H as a Proxmox 9 Home Server
- Building a Voodoo 2 SLI Windows 98 Gaming Rig in 2026: Period-Correct Parts That Are Still Findable
- Best Noctua Cooling Products in 2026: A Brand Buying Guide
- $1,500 Gaming PC Build 2026: Parts, Cost, 1440p FPS
- DeepSeek V4.1-Flash on One RTX 3060 12GB vs Two: Why Neither Can Load It, and What 24 GB Runs Instead
- Best Monitor for Color Grading Under $500 in 2026
- 007 First Light on Steam Deck: Performance & Best Settings
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090