Antec
Antec Performance 1 FT Full Tower E-ATX PC Case, 3 PWM Fans
Bottom line: The Antec Performance 1 FT Full Tower E-ATX PC Case ($144.99 on Amazon as of 2026-11-07 05:20 UTC): Full tower E-ATX layout with room for large motherboards and RTX 40 series GPUs; main trade-off: full tower footprint needs substantial desk or floor space.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Full tower E-ATX layout with room for large motherboards and RTX 40 series GPUs
- ✓ High-airflow mesh front panel paired with pre-installed Storm T3 PWM fans
- ✓ Built-in temperature display shows system status without opening software
- ✓ Front 10Gbps USB Type-C port for fast external SSDs
- ✓ Dual 4mm tempered glass side panels plus 2 cable covers for a clean showcase build
Cons
- ✗ Full tower footprint needs substantial desk or floor space
- ✗ Title says 3 fans, description says 4 Storm T3 fans; confirm the count before buying
- ✗ Glass on both sides leaves no solid panel to hide cable routing behind
- ✗ Front Type-C port needs a matching USB-C header on your motherboard
Manufacturer description
The Antec Performance 1 FT is a full tower E-ATX PC case for builders who want room for large motherboards, long graphics cards and a lot of airflow. Antec lists the case as fully compatible with RTX 40 series GPUs, so a current flagship card fits without a fight. Cooling starts at the front with a high-airflow mesh panel and Storm T3 PWM fans installed at the factory. Because they are PWM fans, your motherboard can speed them up and slow them down with system load. A removable top bracket makes it easier to install fans or a radiator up top before the bracket goes back in. The Performance 1…
SpecPicks Verdict
SpecPicks scored Antec Performance 1 FT Full Tower E-ATX PC Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Antec's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the Antec Performance 1 FT fit an E-ATX motherboard?
Yes. The Performance 1 FT is a full tower E-ATX case, so E-ATX boards fit, and standard ATX boards fit as well.
Will an RTX 4090 or other RTX 40 series card fit in this case?
Antec lists the Performance 1 FT as fully compatible with RTX 40 series graphics cards. Before you order, compare your card's exact length and thickness with the clearance figures on Antec's product page.
How many fans come pre-installed?
The case ships with Antec Storm T3 PWM fans, but the listing is inconsistent: the title says 3 fans and the description says 4. Confirm the current fan count on the product listing before you order.
What does the temperature display show, and what is Antec iUnity?
The display on the case lets you check system temperature status at a glance. Antec iUnity is software that gives you instant data on your PC's specs.
What front I/O ports does the Performance 1 FT have?
The case has a 10Gbps USB Type-C port. To use it, your motherboard needs a compatible internal USB-C header. The full port list is on the manufacturer's spec sheet.
Key Features
- Temperature Display: Glance at your system status.
- Antec iUnity: Provides instant data on PC specs.
- 2 Cable Covers Included for Optimizing the Cable Routing.
- Type-C 10Gbps Port Ready.
- Dual 4mm Tempered Glass Side Panels for Better PC Showcase.
Full Specifications
| Brand | Antec |
|---|---|
| Color | Performance 1 |
| Material | Tempered Glass |
| Case Type | Full Tower |
| Model Name | PERFORMANCE 1 FT |
| Light Color | RGB |
| Antec iUnity | Provides instant data on PC specs. |
| Model Number | PERFORMANCE 1 FT |
| Compatibility | PC |
| Cooling Method | Air |
| Number of Fans | 4 |
| Mfr Part Number | 0-761345-10088-5 |
| Total Usb Ports | 4 |
| Antenna Location | Gaming |
| Compatible Devices | Motherboards (E-ATX, ATX, Micro-ATX, ITX), Graphics Cards, Storage Drives (3.5 inches, 2.5 inches), Cooling Systems |
| Enclosure Material | Tempered Glass |
| Temperature Display | Glance at your system status. |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 2 |
| Warranty Description | 2 year |
Hardware benchmark data
Ready to buy?
Antec Performance 1 FT Full Tower E-ATX PC Case, 3 PWM Fans is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Handheld Gaming PC Under $200 in 2026
- Open Weights Are Reshaping Agentic Coding: A 2026 Local-Rig Reality Check
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Homelab Box Wins in 2026?
- AMD Revives Zen 2: Ryzen 7 4700LE in $800 RTX 3050 Prebuilts
- Best 4K Gaming Monitor Under $500 in 2026
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Best SATA SSD to Revive an Old Laptop: Crucial BX500 vs Samsung 870 EVO
- Gemma 4 31B on a 24GB GPU: RTX 3090 vs RTX 4090 vs RX 7900 XTX Quant Table (2026)
- $1,200 Gaming PC Build 2026: Parts, Cost, 1440p FPS
- RTX 3060 12GB vs RTX 3090 for Local LLMs (2026)
- LM Studio on an RTX 3060 12GB: Local-LLM Setup and tok/s in 2026
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- RX 9070 XT vs RTX 5080 for a 9800X3D Build (2026)
- Best Gaming CPUs for 1080p and 1440p Builds (2026)
- Can a Local RTX 3060 12GB LLM Debug Linux Boot Like Gemini?
- Best Noctua and Quiet-Tier CPU Coolers in 2026
- Noctua NH-U12S vs Cooler Master ML240L for Ryzen 5800X
- Best Budget Streaming Mic + Capture Setup: Blue Yeti vs HyperX QuadCast 2 S
- 1999 Dream Build Reborn: Voodoo3, Pentium III, CF Storage
- GeForce FX 5900 Ultra Period-Correct WinXP Build Guide: Driver Hunt, Half-Life 2 Mixed-Mode, and Doom 3…
- Which Ryzen CPU Is Better? 2026 Buying Guide
- Best Mechanical Keyboard for Office and Gaming Crossover (2026)
- AMD Ryzen AI Halo vs NVIDIA DGX Spark: Local-AI Mini-Box Showdown
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090