Miyoo Mini Plus Grip (Black)
Bottom line: The Petforu Miyoo Mini Plus Grip ($22.99 on Amazon as of 2026-11-20 11:30 UTC): 3D-printed shell lined with soft felt so it grips without scratching the Miyoo Mini Plus; main trade-off: fits only the Miyoo Mini Plus - not the original Mini or other handhelds.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 3D-printed shell lined with soft felt so it grips without scratching the Miyoo Mini Plus
- ✓ Added height and depth let adult hands reach the two inside triggers comfortably
- ✓ Rear shoulder buttons become far easier to hit during play
- ✓ Cutouts keep the charge port clear, so you can play while charging
Cons
- ✗ Fits only the Miyoo Mini Plus - not the original Mini or other handhelds
- ✗ Bulk cancels the MM+ pocketable form factor, so it is a home-use accessory
- ✗ 3D-printed layer lines are visible and rougher than injection-molded plastic
- ✗ Felt liner can trap lint and is awkward to clean once dirty
Manufacturer description
Miyoo Mini Plus Accessories Must Have. Fits the MM+ like a glove. These grips fit and hold in your hand extremely well and feel natural while playing.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Petforu Miyoo Mini Plus Grip, so this read rests on the manufacturer's listed specs and the current price in the handheld consoles category (how we evaluate). Compare with similarly-priced alternatives in the handheld consoles category before committing. On the listing's own facts, the case for it is "3D-printed shell lined with soft felt so it grips without scratching the Miyoo Mini Plus"; the main trade-off is "Fits only the Miyoo Mini Plus - not the original Mini or other handhelds". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Solid 3D print with a soft felt type material on the inside so it fits snug and doesn’t scratch the device. This makes it way easier to reach the two inside triggers with adult hands.
- ERGONOMIC GRIP WITH LINER: Nice quality on the build of this thing. 3D printed, and precision lined where it needs it - to not scratch the handheld device.
- GAME CHANGER: Very comfortable, less fatigue on the hands. Great to reach those shoulder buttons to the back. Easy to charge.
- MAKES IT EASIER TO PLAY. Add height which allows you to benefit from increased arc distance and increased control.
- A GREAT ADDITION to the mm+ when enjoying at home and not wanting just the small compact size.
Full Specifications
| Brand | Petforu |
|---|---|
| Color | Black |
| Theme | Video Game |
| Pattern | Solid |
| Shell Type | Soft |
| Unit Count | 1 Count |
| Form Factor | Case |
| GAME CHANGER | Very comfortable, less fatigue on the hands. Great to reach those shoulder buttons to the back. Easy to charge. |
| Model Number | MMPMH-12 |
| Built-In Media | Miyoo Mini Plus Grip |
| Item Type Name | Accessories |
| Item Dimensions | 5.91 x 3.94 x 1.18 inches |
| Mfr Part Number | MMPMH-12 |
| Compatible Devices | Game Consoles |
| Enclosure Material | Acrylonitrile Butadiene Styrene |
| Additional Features | Anti-Slip |
| Warranty Description | 1 year manufacturer |
| Age Range Description | Adult |
| Water Resistance Level | Not Water Resistant |
| Compatible Phone Models | Miyoo Mini Plus |
Ready to buy?
Miyoo Mini Plus Grip (Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Handheld Consoles
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Logitech G29 vs HORI Force Feedback: Which Sim Wheel for Beginners?
- Tesla Capped AI Spend at $200/Week — Build a Local Inference Box for Less
- Open-Source NVIDIA NVK Vulkan Driver Adds DLSS Support: What It Means for RTX 3060 Owners
- Build a Raspberry Pi Zero W Cyberdeck in 2026: BOM + Wiring Guide
- Best Retro Gaming Gifts in 2026: 5 Picks for Console and PC Collectors
- ASUS A7N8X-Deluxe + Athlon XP Barton 2500+: The Definitive 2003 Enthusiast Build Guide
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Best Budget GPU for 1440p Gaming in 2026: Is the RTX 3060 12GB Still It?
- Mouse Wheel Scrolling Wrong Direction? Here's the Fix
- Build a Low-Power Jellyfin Server on a Raspberry Pi 4 8GB in 2026
- USB-to-IDE Adapter vs CF-to-IDE for Imaging Retro PC Drives
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Microsoft + Nvidia Agent PCs vs a DIY RTX 3060 12GB Local-Agent Box
- CompactFlash Boot Drive for a Win98 / XP Retro PC (2026 Guide)
- Best USB Microphone for Streaming in 2026: QuadCast 2 vs Yeti
- Voodoo3 3000 vs GeForce 256: 1999 Glide vs OpenGL Showdown
- Building a Local LLM Workstation on a Raspberry Pi 5 + Ryzen 7 5800X Hybrid
- Building a 1998 Voodoo2 SLI Gaming PC With CF Storage in 2026
- Best CPU Cooler for the Ryzen 7 5700X: Noctua vs DeepCool vs CoolerMaster
- Best Budget Streaming & Podcast Gear in 2026
- Gemini 3.6 Flash Shipped: Why Local Builders Still Reach for a 12GB GPU
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- HyperX QuadCast 2 S vs Blue Yeti for Streamers: Which USB Mic Wins in 2026?
- AMD Ryzen AI Halo Mini PC: Open-Source Power Analyzed
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090