WINSINN 60mm RGB Fan 5V
Bottom line: Per its Amazon listing, the WINSINN 60mm RGB Fan 5V ($11.99 on Amazon as of 2026-11-21 23:21 UTC): ✔️WINSINN 60mm RGB fan which micro size and lightweight design; the working voltage is 5V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ ✔️WINSINN 60mm RGB fan which micro size and lightweight design
- ✓ The working voltage is 5V
- ✓ Backed by WINSINN's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WINSINN 60mm RGB Fan 5V, so this read rests on the manufacturer's listed specs and the current price in the cooling & fans category (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- ✔️WINSINN 60mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 5V, which perfectly compatible a various 3D Printer / Desktop Computer / Notebook / PC Case / Router / TV box / VR or any DIY cooling and narrow place.
- ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours.
- ✔️Rated Voltage: DC 5V, Current: 0.2A, Power: 1.0W, Speed: 3500PRM, Air Pressure: 2.05mmH₂O, Airflow: 14.80CFM, Noise: 28.5dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️What you get: 4 x 6010 RGB Fan 5V - Hydraulic Bearings. If you have any questions about WINSINN products, please feel free to contact us at any time, we will resolve your issue when we received your message.
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | FAN60105HBRGB |
| Voltage | 5 Volts |
| Wattage | 1 watts |
| Material | Glass |
| Noise Level | 28.5 Decibels |
| Part Number | RGBFAN60105HB |
| Compatibility | PC |
| Material Type | Glass |
| Cooling Method | Air |
| Air Flow Capacity | 14.8 Cubic Feet Per Minute |
| ✔️Widely Used | Suitable for ventilation of Small PC Case / Router / TV box / VR glasses and any small electronic equipment cooling ventilation. |
| Compatible Devices | Desktop |
| ✔️Rated Voltage | DC 5V, Current: 0.2A, Power: 1.0W, Speed: 3500PRM, Air Pressure: 2.05mmH₂O, Airflow: 14.80CFM, Noise: 28.5dBA |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 3500 RPM |
| Full listing title | WINSINN 60mm RGB Fan 5V, LED Colorful Micro 5 Volt Fans 6010 Hydraulic Bearing, Brushless Cooling 60x10mm 2PIN, Works with 3D Printer/Computer/Notebook/PC Case/Router/TV Box (Pack of 4Pcs) |
Benchmark data for other processors
Ready to buy?
WINSINN 60mm RGB Fan 5V, LED Colorful Micro 5 Volt Fans 6010 Hydraulic Bearing, Brushless Cooling 60x10mm 2PIN, Works with 3D Printer/Computer/Notebook/PC Case/Router/TV Box (Pack of 4Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget PC Upgrades for 1440p Gaming in 2026
- Why a Game Boy Clone Ran Too Fast — and the DIY Fix Makers Are Building
- Best CPU Cooler for the Ryzen 7 5800X in 2026
- Wooden CPU Cooler: How to Build One and What to Expect
- Pushing a 6GB VRAM Laptop to Its Limits With Qwen3.6-35B-A3B
- Ryzen AI Max+ 395 Specs: Full Breakdown and Comparison
- Ryzen AI Max vs RTX 40 Series: Which Wins for AI and Gaming?
- Best Budget Gaming PC Build 2026: AMD Parts Guide
- Should You Overprovision vCPU Per VM in a Homelab?
- Ryzen 7 5800X + RTX 3060 12GB: Best 1440p AM4 Build
- Jan.ai vs LM Studio vs Ollama: Easiest Local-LLM App for a 12GB Card in 2026
- Best 12GB GPU for Local LLMs in 2026
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB in 2026
- Best Hardware for Local OCR and Document AI in 2026
- Best Upgrades for a DDR4 Gaming PC in 2026
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Best Mechanical Keyboard for Office and Gaming Crossover (2026)
- Pentium III Coppermine vs Tualatin: Which 2001 LAN Build CPU Aged Better
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- 20GB Homelab Memory Left: What to Add Next
- Self-Host a 24/7 FM Radio Station on a Raspberry Pi Zero 2W
- FIDECO vs Unitek vs Vantec: The Best IDE-to-USB Adapter for Rescuing Retro Drives in 2026
- Best CPU Cooler for a Ryzen Build in 2026 (Air & AIO)
- Best SSD to Upgrade Your PS4 Pro in 2026: SATA Drives That Actually Speed It Up
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090