GeeekPi Active Cooler for Raspberry Pi 5
Bottom line: The GeeekPi Active Cooler for Raspberry Pi 5 ($11.99 on Amazon as of 2026-10-20 22:16 UTC): PWM speed control works natively with Raspberry Pi OS fan curves; main trade-off: locked to Raspberry Pi 5 4GB/8GB only, no Pi 4 or older boards.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ PWM speed control works natively with Raspberry Pi OS fan curves
- ✓ Armor Lite V5 aluminum heatsink plus 3510 fan pulls heat off the Pi 5 fast
- ✓ Ships complete: screwdriver, 2 screws, 4 thermal pads, manual
- ✓ Low-profile lightweight build mounts with just two screws
Cons
- ✗ Locked to Raspberry Pi 5 4GB/8GB only, no Pi 4 or older boards
- ✗ Fan is active, not silent, so a passive case stays quieter at idle
- ✗ GeeekPi publishes no dBA or CFM figures for the 3510 fan
- ✗ Only 2 mounting screws included, so a lost screw means a hardware-store trip
Manufacturer description
Compatible with Raspberry Pi 5 --- This Armor Lite V5 Aluminum Heatsink is only designed for Raspberry Pi 5 4GB/8GB. Support PWM Speed Control --- Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS. Good Heat Dissipation Effect --- With 3510 ultra-quiet cooling fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly.
SpecPicks Verdict
SpecPicks scored GeeekPi Active Cooler for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. GeeekPi's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatible with Raspberry Pi 5 --- This Armor Lite V5 Aluminum Heatsink is only designed for Raspberry Pi 5 4GB/8GB.
- Support PWM Speed Control --- Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS.
- Good Heat Dissipation Effect --- With 3510 ultra-quiet cooling fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly.
- Lightweight and Easy to Install --- With screwdriver and 2pcs screws, it's easy to fix the heatsinks with Raspberry Pi Board.
- Package Includes: 1 x Armor lite V5 for Raspberry Pi 5, 1 x Screw driver, 2 x Screws, 4 x Thermal Pads, 1 x User Manual;
Full Specifications
| Brand | GeeekPi |
|---|---|
| Model | 0166 |
| Warranty | 3 months warranty |
| UnitCount | 1 |
| Manufacturer | GeeekPi |
| ItemPartNumber | ZP-0166 |
| Full listing title | GeeekPi Active Cooler for Raspberry Pi 5, Armor Lite V5 Cooler Aluminum Heatsink and Cooling Fan for Raspberry Pi 5 4GB/8GB |
Ready to buy?
GeeekPi Active Cooler for Raspberry Pi 5, Armor Lite V5 Cooler Aluminum Heatsink and Cooling Fan for Raspberry Pi 5 4GB/8GB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this Cooling & Fan.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- GameSir G7 SE vs 8BitDo Pro 2 vs DualSense for PC
- RTX 3060 12GB vs Ryzen 5 5600G iGPU for Entry Local LLM Inference
- Best Low-Power CPU for a Jellyfin Home Server: 5600G vs i7-9700K
- 9800X3D + RTX 5070 Ti PC Build 2026: 1440p High-Refresh
- Best Streaming Gear for New Streamers in 2026: 5 Picks to Start On-Air
- RTX 4090 AIO Kit 2025: Pricing, Cooling & Buying Guide
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- Retro Game Emulator Online: Top Browser-Based Picks for 2026
- Best Budget Gaming PC Build Parts in 2026: 5 Core Picks
- Best Controller for Retro Emulation on PC: 8BitDo, GameSir, DualSense
- Home Assistant on a Raspberry Pi 4 8GB: Full 2026 Setup
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Sega Genesis Mini vs SNES Classic: The Definitive 2026 Plug-and-Play Retro Showdown
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
- AMD Revives Zen 2: Ryzen 7 4700LE in $800 RTX 3050 Prebuilts
- Gemma 4 31B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT vs Arc A770 Quant Table (2026)
- Can a 12GB RTX 3060 Run a 70B LLM? The Offload Reality Check
- Logitech G29 vs HORI Force Feedback Wheel for Sim-Racing Beginners
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
- Best Controllers for Retro Gaming and Emulation in 2026
- Best Retro Console Reissues to Buy in 2026
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- Best Retro PC Building Tools & Adapters 2026: The Kit That Ships the Build
- Raspberry Pi AI HAT+ 2025: TOPS, Price, Setup Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090