10W 50 ohm Dummy Load,10 Watt rf Load for Ham Radio with N Type Connector DC-3Ghz VSWR 1.2
Bottom line: Per its Amazon listing, the 10W 50 ohm Dummy Load: 1pcs 10W 50 ohm dummy load with N type connector; 10W Dummy Load with N male connector, 50 Ohm Impedance, and DC to 3 GHz Frequency Range.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 1pcs 10W 50 ohm dummy load with N type connector
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 10W 50 ohm Dummy Load, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 1pcs 10W 50 ohm dummy load with N type connector
- 10W Dummy Load with N male connector, 50 Ohm Impedance, and DC to 3 GHz Frequency Range. Ideal for RF testing, antenna measurement, and SWR calibration.
- This small 10 watt dummy load is designed for ham radio, CB radio, and microwave systems, this high-power dummy load ensures accurate measurements with a low VSWR of 1.2:1. Perfect for professionals and hobbyists alike.
- This 10w Termination Load is a great value for amateur radio operators, CB users, and technicians needing a reliable 50Ω termination.
- The10 watt ham radio dummy load excels in testing, tuning, and troubleshooting radios without radiating signals. While not lab-grade at UHF, it’s more than sufficient for typical HF/VHF work..
Full Specifications
| Brand | Generic |
|---|---|
| Color | black |
| Model | BC-TE10-N3G |
| Wattage | 10 watts |
| Frequency | 3 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | 10W N male rf 50 ohm Dummy Load |
| Unit Count | 1.0 Count |
| Connector Type | 1 Pin |
| Number of Pins | 1 |
| Maximum Voltage | 50 Volts |
| Number of Items | 1 |
| Special Feature | Lightweight |
| Connector Gender | Male |
| Specification Met | CE |
| Compatible Devices | No |
| Included Components | 1pcs 10w rf 50 ohm Dummy Load |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Warranty Description | 1 Year |
Ready to buy?
10W 50 ohm Dummy Load,10 Watt rf Load for Ham Radio with N Type Connector DC-3Ghz VSWR 1.2 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSD to Upgrade a PlayStation 4 Pro in 2026
- Best GPU for 1440p Esports at 240Hz in 2026
- ComfyUI on a 12GB GPU: SDXL and Flux Setup, VRAM Limits, and Real Throughput
- Best Budget GPU for Local 12B–14B LLM Inference: Why the RTX 3060 12GB Still Wins
- Sony to End Physical PlayStation Disc Production by 2028: What It Means for Retro Collectors
- Can a Ryzen 5 5600G Run Local LLMs With No GPU? CPU + iGPU Inference Tested
- Claude Opus 4.8 Ships, Tops GPT-5.5 on Intelligence Index
- Best Quiet PC Upgrades for Apartment Gaming in 2026
- Top 20 Most Played Steam Deck Games: April 2026
- ROCm in 2026: Is AMD Finally a Real Local-LLM Option?
- Anthropic's Samsung Chip Talks: Why Local Inference on an RTX 3060 Still Matters
- How to Find and Join Active Retro Multiplayer Servers in 2026 (Quake 3, UT99, CS 1.6, Diablo II)
- EU GPU Price Tracking: Why RTX 5090 Won't Get Cheaper
- Ultrawide vs 27-Inch 4K for Sim Racing on a G29 and RTX 3060
- Best Wheel and Controller for Truck and Farm Sims in 2026
- Ryzen 7 5800X vs Ryzen 7 5700X for Gaming and Local AI: Which Wins?
- How to run Qwen 3 32B on Arc B580
- Voodoo3 3000 Won't POST: Troubleshooting a 1999 Build in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- Authentic Retro PC Audio in 2026: Sound BlasterX G6 vs Vintage AWE64 and Audigy
- ZOTAC RTX 3060 12GB vs Intel Arc B580 12GB for 1440p Gaming in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic Under $200
- Kimi K3 Sold Out the Cloud — Can You Run It Locally?
- Silent Cooling for a Retro Sleeper PC: Fitting a Modern Quiet Fan to a Vintage Case
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090