TUMMASTER ARGB Fan HUB
Bottom line: The TUMMASTER ARGB Fan HUB: Drives 10 ARGB fans from one hub, cutting case cable clutter; main trade-off: only the fan in the red port reports RPM back to the board.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Drives 10 ARGB fans from one hub, cutting case cable clutter
- ✓ Magnetic mount sticks to steel case panels, no screws needed
- ✓ SATA power straight from the PSU avoids voltage loss across 10 fans
- ✓ RF remote plus chassis button both switch lighting modes
- ✓ Compact 3.83 x 2.33 x 0.6 in board tucks behind the motherboard tray
Cons
- ✗ Only the fan in the red port reports RPM back to the board
- ✗ Lighting control is remote-only; PWM needs a motherboard 4-pin header
- ✗ 5V 3-pin ARGB only, 12V 4-pin RGB fans can be damaged if plugged in
- ✗ Plug orientation must match the arrow or you risk killing the device
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for TUMMASTER ARGB Fan HUB, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Drives 10 ARGB fans from one hub, cutting case cable clutter"; the main trade-off is "Only the fan in the red port reports RPM back to the board". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Easy Installation】This fan hub supports 10 sets of ARGB fans, easy to manage cabling. Magnetic suction mounting, RF remote control, convenient SATA power cable direct transfer, safe and secure,Small body, large capacity. Multi line management and control, keep the cables neat,
- 【PWM intelligent temperature control】Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
- 【ARGB Lighting】Support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.)
- 【SATA Power Input】 Fans are input directly from power supply via Sata Power, supporting up to 10 fans, the fan hub prevent stray currents and no voltage loss make sure fan speed smoother and efficient operation.
- 【Exquisite Size 3.83 inches length】The size of pwm fan hub is 3.83*2.33*0.6 inches, small and exquisite shape makes the internal wiring of your computer case tidy. NOTE: THE CONTROLLER ONLY FOR LIGHT SWITCHING, PLEASE CONNECT 12V 4PIN INTERFACE ON MOTHERBOARD FOR FAN PWM FUNCTION.
Full Specifications
| Brand | TUMMASTER |
|---|---|
| Color | J-10 Pro |
| Model | J-10 Pro |
| Voltage | 12 volts |
| Material | Plastic |
| Unit Count | 10 Count |
| Part Number | J-10 Pro |
| Display Type | LED |
| Compatibility | PC |
| Material Type | Plastic |
| Number of Items | 1 |
| Included Components | HUB,SATA Prowrt Clble,ARGB Clble,PWM Clble,Remote Controls,Installation Guide |
| Item Dimensions L x W x H | 3.83"L x 2.33"W x 0.6"H |
| Full listing title | ARGB Fan HUB, 9/10 Port 4 Pin PC Fan Controller, 5V-3Pin LED Hub, Magnetic Suction, SATA Power Input,RF Remote & Chassis Key Control,Controller Support ARGB PWM Fans Splitter (J-10 Pro) |
Ready to buy?
ARGB Fan HUB, 9/10 Port 4 Pin PC Fan Controller, 5V-3Pin LED Hub, Magnetic Suction, SATA Power Input,RF Remote & Chassis Key Control,Controller Support ARGB PWM Fans Splitter (J-10 Pro) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- International Women in Engineering Day 2026: A Beginner's Pi Starting Point
- Best 4K Gaming Monitor for the PS5 Pro and PC in 2026
- Intel Arc B580 for Local LLMs in 2026: 12GB for Under $300
- HiDream-O1-Image Debuts as Top Open-Weights Text-to-Image Model
- Best $1000 Prime Day Gaming PC: RTX 5060 Ti + 32GB RAM
- Best GPU for Running Llama 8B Under $300 in 2026
- Voodoo3 3000 PCI Install Guide for Win98 SE in 2026
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Cyberdeck Raspberry Pi 4/5 Mini Music Workstation Build Guide
- Intel llm-scaler-vllm PV 1.4 Adds Arc Pro B70 Support: What Local-LLM Builders Get
- Qwen 3.6 vs Frontier Models on a Local Rig: The Honest Gap
- Running Gemma 4 31B Finetunes Locally: Dual RTX 3060 12GB vs Single 24GB Card
- Best Wireless Gaming Controller for PC and Console (2026)
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- GLM-5.2: The Open-Weights Model Built for Long-Horizon Agentic Tasks
- Run Text-to-SQL Locally on a 12GB GPU After Gemini-SQL2
- Best PC Controller in 2026: DualSense vs GameSir G7 SE vs HORIPAD
- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- Running Mistral's New OCR Model Locally on a 12GB GPU
- CompactFlash as a Silent IDE Boot Drive in a Retro Windows 98 Gaming PC: Full 2026 Guide
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
- No GPU Required? Testing Local LLM Inference on the Ryzen 5 5600G iGPU
- SteamOS Boots on Intel Hardware: Enthusiast Hack Lands
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090