IDC40 2x20 40Pin 0.1" FRC Connector Male Interface Module DIN Rail Mounting Terminal Block Breakout Board for PLC MCU Flat Ribbon Cable
Bottom line: The IDC40 2x20 40Pin 0.1" FRC Connector Male Interface Module DIN Rail is a specs-and-price decision rather than a crowd-consensus one in the cables & connectors category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Willwewon's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored IDC40 2x20 40Pin 0.1" FRC Connector Male Interface Module DIN Rail… using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Willwewon's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
- Wire range: 26-16AWG. Rated voltage: 60V. Rated current: 1A / per pin. Operating temperature: -20 to 70 Celsius.
- The screw connectors make attaching and removing wires easily. Really helpful in your DIY prototyping project.
- DIN Rail Mounting: Come with Din mount carrier and screws Compatible with 35mm, 32mm or 15mm DIN rail.
- Widely used: It is suitable for other equipment interfaces using 2x20 40-bit plug connectors, including but not limited to I/O cards, DAQ devices, and DIY projects that help you.
Full Specifications
| Brand | Willwewon |
|---|---|
| Gauge | 26-16 |
| Pitch | 2.54 Millimeters |
| Item Pitch | 2.54 Millimeters |
| Unit Count | 1.0 Count |
| Wire range | 26-16AWG. Rated voltage: 60V. Rated current: 1A / per pin. Operating temperature: -20 to 70 Celsius. |
| Part Number | WW100 |
| Mounting Type | DIN Rail Mount |
| Connector Type | IDC |
| Number Of Poles | 40 |
| Centerline Length | 113 Millimeters |
| DIN Rail Mounting | Come with Din mount carrier and screws Compatible with 35mm, 32mm or 15mm DIN rail. |
| Specification Met | CE |
| Number Of Contacts | 40 |
| Included Components | 1PCS IDC40 2x20 Pins 0.1" Male Header Breakout Board |
| Number of Positions | 40 |
| Item Dimensions W x H | 4.45"W x 2.09"H |
Ready to buy?
IDC40 2x20 40Pin 0.1" FRC Connector Male Interface Module DIN Rail Mounting Terminal Block Breakout Board for PLC MCU Flat Ribbon Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Can a 12GB RTX 3060 Run a 70B LLM? The Offload Reality Check
- Prime Day 2026: Logitech Gaming Mice Drop Up to 47% Off
- Build a Private Security Camera on a Raspberry Pi (Ring Alternative) in 2026
- Using LLMs to Install Vintage GPU Drivers on Win98 and WinXP: A Field Report from Our Retro-Agent Fleet
- Best SATA SSD to Upgrade a PS4 Pro in 2026: Faster Loads on a Budget
- Best SATA SSD for Boot Drive Upgrades on Aging Desktops (2026)
- 007 First Light on Steam Deck: Performance & Best Settings
- Console to Gaming PC: What Changes in 2025
- Build a Frigate AI Security-Camera NVR on a Raspberry Pi 4 8GB in 2026
- Best Controller for PC Emulation and Retro Gaming in 2026
- 7800X3D vs 5700X3D: Is the AM5 Upgrade Worth It?
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- Etched's Transformer-Only Inference Chip vs Your GPU: What Changes for Local Builders
- Best Gaming CPUs for 2026: Why the Ryzen 7 9800X3D Leads the Pack
- Qwen 3.6 27B vs DeepSeek V4: Which Local Model Wins on a Single 5090?
- GPT-5.5 Instant Shipped: What an RTX 3060 12GB Local Stack Covers When OpenAI Retires a Model
- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- M5 vs DGX Spark vs Strix Halo vs RTX 6000: AI Workload Guide
- Best CPU Cooler for AMD Ryzen 7 5800X High-TDP Builds (2026)
- Best GPU for the Ryzen 7 5800X3D in 2026: No-Bottleneck Picks
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- Best 4K Monitor for PS5 in 2026 (Without Overpaying)
- Best Budget Gaming CPU Under $250 in 2026
- Best SATA SSDs for Older PCs and Retro Builds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090